CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
1-1/4" (32mm) MAX.
8" (203mm) - 16" (406mm)
CENTERS
7/8" (22mm) MAX.
HANDLE
ESCUTCHEON DIA.
2-3/16" (56mm)
5-45/64"
(145mm)
6-19/64"
(160mm)
3-1/4"
(83mm)
VALVE BODY
INSTALLS THRU
1-3/16" (30mm) MIN.
DIAMETER HOLE.
SPOUT BODY
INSTALLS THRU
1-7/16" (37mm) MIN.
DIAMETER HOLE.
2-7/8"
(72mm)
10-13/64"
(260mm)
MIN.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Bamboo™
Two-Handle Roman Tub Faucet Trim
with Integral Diverter
Model: TS8813BN
NNOOTTEE::
THE INSTALLATION SHOWN IS FOR TILE DECKS, THIS VALVE WILL ALSO FIT STEEL, CAST IRON OR PLASTIC DECKS
DESCRIPTION
- Metal construction with LifeShine® brushed nickel finish
- For installations from 8” (203mm) to 16” (406mm) centers
- Designed to be installed on decks up to 2-1/8” (54mm)
- The tub fill spout is a slip fit design and the supplies are
1/2” type K, copper tubing
- Includes optional hot and cold temperature indicators
- For use with S924 valve
OPERATION
- Lever style handles
- Rotate hot side handle counterclockwise to open and clockwise to close.
Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Spout designed to deliver 18 gpm max. at 40 psi (68 L/min)
- Hand shower meets 2.5 gpm max. (9.5 L/min)
CARTRIDGE
- 1248 cartridge design
- Non-metallic and stainless steel materials
STANDARDS
- Third party certified to CSA B125, ASME A112.18.1M, ANSI A117.1
and all applicable requirements referenced therein
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects to the original
consumer purchaser
- 5 year warranty if used in commercial installations
/