Moen T910AN Installation guide

Category
Faucets
Type
Installation guide

This manual is also suitable for

Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
NOTE: THE INSTALLATION SHOWN IS FOR TILE DECKS, THIS VALVE WILL ALSO FIT STEEL, CAST IRON OR PLASTIC DECKS
1-1/4" (32mm) MAX.
4-1/2" (114mm)
MINIMUM
VALVE BODY DIA.
1-1/8" (29mm)
SPOUT SHANK DIA.
27/32" (21mm)
STREAM
FORMER
7/8" (22mm) MAX.
Handle Base
2-7/8"
(62mm) DIA
2-9/16"
Spout Base
3-1/2" (89mm) DIA
SPOUT POST
INSTALLS THRU
7/8" (22mm) MINIMUM
DIAMETER HOLE.
10-5/8" (270mm)
2-7/8"
(73mm)
VALVE BODY
INSTALLS THRU
1-3/16" (30mm) MINIMUM
DIAMETER HOLE.
2-7/8"
(73mm)
ADA
KINGSLEY™
Roman Tub Trim Only
Models: T910, T910CP, T910BN, T910P,
T910WR, T910AN, T910ORB
DESCRIPTION
Metal construction with chrome plated, antique nickel,
oil rubbed bronze, wrought iron, LifeShine
®
polished
brass or brushed nickel finishes
For installations from 8" (203mm) to 10" (254mm) centers
Designed to be installed on decks up to 2-1/8" (54mm)
The tub fill spout is a slip fit design and the supplies
are 1/2" type K, copper tubing
Hot and Cold indicators included
OPERATION
Lever style handles
Can be installed with any Moen Deck Mounted
Roman Tub Trim Kit
Rotate hot side handle counterclockwise to open
(clockwise to close) and the cold side handle
(clockwise to open) and (counterclockwise to close)
FLOW
Designed to deliver 18 gpm at 40 psi (68 L/min).
CARTRIDGE
Nonmetallic and stainless steel materials
STANDARDS
Designed and manufactured to comply with
the applicable requirements of: CSA B-125 and ASME
A112.18.1M and all applicable requirements referenced
therein and complies with the applicable requirements
of ANSI A117.1
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
Rev. 3/04
  • Page 1 1

Moen T910AN Installation guide

Category
Faucets
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI