Moen T6620BN-9000-L Dimensions Guide

Moen
Brand
Moen
Model
T6620BN-9000-L
Category
Sanitary ware
Type
Dimensions Guide
BRANTFORD™
Two Handle Widespread
Lavatory Faucet
Models: T6620 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#175709. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
5"
(127mm)
2"
(51mm)
3"
(76mm)
3-1/2"
(89mm)
8"
(204mm)
5"
(127mm)
2-1/4"
(57mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
HOT
INLET
COLD
INLET
8" (203mm) - 16"(406mm) CENTERS
1-1/4"
(32mm)
5-1/8"
(130mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 1/16
There is more than 1 version of this model.
Page down to identify the version you have.
M•pact System
DESCRIPTION
• Duralock® quick connect system
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1234™ Duralast™ cartridge
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water efficiency
regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
DESCRIPTION
• Quick connect system
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made before
October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
BRANTFORD™
Two Handle Widespread
Lavatory Faucet
Models: T6620 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
3-1/2"
(89mm)
5"
(127mm)
Lift
Rod
2"
(51mm)
3"
(76mm)
3-1/2"
(89mm)
8"
(204mm)
5"
(127mm)
QUICK CONNECT
HOSE ASSEMBLY
2-1/4"
(57mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 8/15
M•pact System
M•PACT VALVE
Widespread Lavatory Rough-in Valve
Models: 9000, 69000
(69000-Bulk Packed 6 per carton)
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#175709. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE.
NOTE: MAXIMUM HOLE DIA. 1-1/2"
DESCRIPTION
• Duralock™ quick connect system
• Brass construction
• 1/2" IPS connections
• Includes pop-up waste assembly
OPERATION
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
CARTRIDGE
• 1234 cartridge design with nonmetallic and stainless steel materials
STANDARDS
When Trim Kit is added to M•Pact valve, the product is:
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
1-1/2" (38mm)
MAX DECK
THICKNESS
8" (203mm)
16"(406mm) CENTERS
Quick
Connect
Hose
Assembly
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 5/16
There is more than 1 version of this model.
Page down to identify the version you have.
M•PACT VALVE
Widespread Lavatory Rough-in Valve
Models: 9000, 69000
(69000-Bulk Packed 6 per carton)
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#175709. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE.
NOTE: MAXIMUM HOLE DIA. 1-1/2"
DESCRIPTION
• Quick connect system
• Brass construction
• 1/2" IPS connections
• Includes pop-up waste assembly
OPERATION
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
CARTRIDGE
• 1224 cartridge design with nonmetallic and stainless steel materials
STANDARDS
When Trim Kit is added to M•Pact valve, the product is:
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
1-1/2" (38mm)
MAX DECK
THICKNESS
8" (203mm)
16"(406mm) CENTERS
Quick
Connect
Hose
Assembly
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 5/16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Moen T6620BN-9000-L Dimensions Guide

Moen
Brand
Moen
Model
T6620BN-9000-L
Category
Sanitary ware
Type
Dimensions Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents