ATEN CCS-SPK-SB-100-B User guide

ATEN
Brand
ATEN
Model
CCS-SPK-SB-100-B
Category
Network switches
Type
User guide

ATEN CCS-SPK-SB-100-B: This soundbar is designed to enhance the audio experience in conference rooms, providing clear and immersive sound for local participants. It can be effortlessly mounted on the bottom or top of a 65-inch touch display, offering optimal sound projection. Alternatively, it can be placed on a wall or shelf for added flexibility. The soundbar connects to the system via stereo audio input, ensuring seamless audio integration.

ATEN CCS-SPK-SB-100-B: This soundbar is designed to enhance the audio experience in conference rooms, providing clear and immersive sound for local participants. It can be effortlessly mounted on the bottom or top of a 65-inch touch display, offering optimal sound projection. Alternatively, it can be placed on a wall or shelf for added flexibility. The soundbar connects to the system via stereo audio input, ensuring seamless audio integration.

quickstart guide
CCS-SPK-SB-100-B
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
CCS-SPK-SB-100-B
For regulatory compliance information, refer to Doc. 7561.
QUICKSTART DOC. 7560A (2037097) 10.13
Sound Bar for Crestron RL™
The CCS-SPK-SB-100-B sound bar, supplied as part of a Crestron RL™ Group
Collaboration System, produces clear audio for local conference room participants. The
speaker is typically mounted to the bottom (recommended) or top of the system’s 65”
touch display. In a dual display system configuration, it may be preferable to mount the
speaker to a wall or place on a shelf or other flat surface between the two displays.
Rear View
Mounting Brackets
and Screws Supplied
(2 Each)
25.20 in
(640 mm)
2.80 in
(71 mm)
3.19 in
(81 mm)
Top View
39.00 in
(991 mm)
3.50 in
(89 mm)
Front View
1
Physical Views
1
3.40 in
(87 mm)
Side View
Wall Mount Configuration
3.90 in
(99 mm)
Side View
Shelf Placement Configuration
AUDIO IN
R
L
POWER
100-240V~
50 / 60Hz
OFF
ON
MAX 0.3A
Control Panel (Enlarged from Rear View)
6’ (~2 m)
Power Cable
Attached
Power Switch
Stereo
Audio Input
quickstart guide
CCS-SPK-SB-100-B
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
CCS-SPK-SB-100-B
For regulatory compliance information, refer to Doc. 7561.
QUICKSTART DOC. 7560A (2037097) 10.13
Sound Bar for Crestron RL™
Installation
Mounting on 65” Touch Display
The sound bar is supplied with brackets attached that are used for
mounting the sound bar to a wall or placement on a flat surface such
as a shelf. Using a #1 or #2 Phillips screwdriver, remove the screws
and brackets from the sound bar. Refer to the CCS-UC-100 Quickstart
Guide (Doc. 7479) and use the screws to attach the sound bar to the
sound bar bracket supplied with the CCS-UC-100 Crestron RL System,
for either the bottom (recommended) or top mounting configuration on
the 65” display frame.
Alternate Mounting Configurations
Wall Mounting. For wall mounting, refer to the illustration to the right
and do the following:
1. Leave the brackets attached to the sound bar as supplied.
2. Mark the desired mounting location on the wall and drill two pilot
holes 25.2 inch (640 mm) apart.
3. Install two flat head or similar screws (not supplied), leaving a gap
of approximately 1/8 inch (~3 mm) between the screw head and
the wall.
4. Connect audio cable CBL-AUD-3MM-RCA-3, supplied with the
CCS-UC-100, to the AUDIO IN connectors (red to R and white
to L).
5. Position the sound bar on the wall so the bracket keyholes are
over the screw heads, and slide the sound bar down so the
screws engage the keyhole slots. It may be necessary to adjust
the screws to achieve a snug fit to prevent the sound bar from
being accidentally dislodged.
6. Plug the attached power cord into a 100-240 Vac ~50/60 Hz
power source, but do not press the POWER switch to the ON
position at this time.
Shelf Placement. For shelf or other flat surface placement, refer to
the illustration to the right and do the following:
1. Use a #1 or #2 Phillips screwdriver to remove the screws securing
the brackets to the sound bar, reorient the brackets as shown in
the illustration so the rubberized portion of the brackets is in
contact with the shelf, and reattach the screws.
2. Connect audio cable CBL-AUD-3MM-RCA-3, supplied with the
CCS-UC-100, to the AUDIO IN connectors (red to R and white
to L).
3. Plug the attached power cord into a 100-240 Vac ~50/60 Hz
power source, but do not press the POWER switch to the ON
position at this time.
2
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, and Crestron RL are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and
trade names may be used in this document to refer to either the entities claiming the marks and names or
their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not
responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
2
Bracket
Screw
Further Inquiries
To locate specific information or resolve questions after reviewing this guide, contact
Crestron's True Blue Support at 1-888-CRESTRON [1-888-273-7876] or, for
assistance within a particular geographic region, refer to the listing of Crestron
worldwide offices at www.crestron.com/offices.
T
o post a question about Crestron products, log onto Crestron’s Online Help at
www.crestron.com/onlinehelp. First-time users must establish a user account to fully
benefit from all available features.
Future Updates
As Crestron improves functions, adds new features and extends the capabilities of
the CCS-SPK-SB-100-B speakers, additional information may be made available as
manual updates. These updates are solely electronic and serve as intermediary
supplements prior to the release of a complete technical documentation revision.
Check the Crestron Web site periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
Problem Solving
Troubleshooting
The following table provides corrective action for possible trouble situations. If further
assistance is required, please contact a Crestron
®
customer service representative.
TROUBLE
POSSIBLE CAUSE(S)
CORRECTIVE ACTION
Sound is missing
or intermittent
from speakers.
Cables may not be
connected properly.
Verify cable connections between
amplifier and speakers.
Amplifier is not receiving
input signal or amplifier
malfunction.
Verify amplifier is functioning correctly,
that it is receiving an input signal and
that correct input source is selected.
There may be a faulty
device in the system.
Verify all devices in system are
functioning properly.
Constant noise
such as buzz,
hum, or hiss
coming from
speakers.
There may be a system
grounding fault.
Verify system grounding.
3
Reoriented
Bracket
  • Page 1 1
  • Page 2 2

ATEN CCS-SPK-SB-100-B User guide

ATEN
Brand
ATEN
Model
CCS-SPK-SB-100-B
Category
Network switches
Type
User guide

ATEN CCS-SPK-SB-100-B: This soundbar is designed to enhance the audio experience in conference rooms, providing clear and immersive sound for local participants. It can be effortlessly mounted on the bottom or top of a 65-inch touch display, offering optimal sound projection. Alternatively, it can be placed on a wall or shelf for added flexibility. The soundbar connects to the system via stereo audio input, ensuring seamless audio integration.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents