2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. APC
  7. NetShelter SX

APC NetShelter SX User manual

  • Hello! I am an AI chatbot trained to assist you with the APC NetShelter SX User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NetShelter SX Networking Enclosure and Accessories
NetShelter SX Standard Features
• Vertical 0U Accessory Channels toollessly mount
Rack PDUs and vertical cable management
• Front and rear perforated doors
• Half-height side panels
• Easily adjustable levelling feet and casters
• Numbered U positions
• Pre-installed joining brackets
• Doors, sides, roof, and rails are bonded to frame
NetShelter
®
SX Networking Enclosures and
Side Airflow Duct Kit
Maintains the NetShelter SX design while
offering improved networking application
support and a superior solution for side airflow
Cisco networking switches
CABLE ACCESS ROOF
• Two large cable access slots for high density
cabling and brush strips for air containment
• Two spring loaded pins allow for easy roof
removal and installation with cables in place
EASILY ADJUSTABLE VERTICAL MOUNTING
RAILS WITH VERTICAL CABLE MANAGERS
• Easily align rails and adjust in 1/4 inch increments
• Vertical mounting rail opened for improved side airflow
• High capacity cable management pre-installed
• Rail position preset to accommodate Cisco switches and
cable management
Description
APC SKU
Number
NetShelter SX 42U 750mm Wide x 1070mm Deep Networking Enclosure with Sides Black AR3140
NetShelter SX 42U 750mm Wide x 1200mm Deep Networking Enclosure with Sides Black AR3340
NetShelter SX 48U 750mm Wide x 1200mm Deep Networking Enclosure with Sides Black AR3347
NetShelter SX Side Air Flow Duct Kit AR7715
Horizontal Cable Manager 2U x 6" Deep Single Side with Cover AR8603
Additional Vertical Cable Management sections for Networking Enclosures
AR7717
SIDE AIRFLOW DUCT KIT
• Single design for compatibility with Cisco 6509, 6513,
9509, 9513 switches
• Isolation of hot and cold aisle increasing equipment life
• Networking enclosure system compatible
HIGH DENSITY 2U HORIZONTAL CABLE
MANAGER
• Smooth plastic fingers provide proper bend radius
• Rear pass-through cable slots provide improved
accessibility from the front to rear of the enclosure
Available in:
42/48U Height
750mm Width
1070/1200mm Depth
/