Eaton RCACRP0612KB Datasheet

Category
Rack accessories
Type
Datasheet

This manual is also suitable for

Eaton RCACRP0612KB is a roof panel kit designed for use with Eaton REC Series IT racks. It provides an energy-saving envelope for Eaton's Intelligent Power Pod™ platform. The kit includes an acrylic panel, panel frame with Velcro™ seal, and all hardware to attach panels to racks and adjacent roof panels. The roof panels are 3 mm thick, made of Perpex Cast Acrylic, and are attached with Velcro™. They meet UL94 HB, NFP 92-307 (dripless), and BS 476 Part 7 Class 3 standards.

Eaton RCACRP0612KB is a roof panel kit designed for use with Eaton REC Series IT racks. It provides an energy-saving envelope for Eaton's Intelligent Power Pod™ platform. The kit includes an acrylic panel, panel frame with Velcro™ seal, and all hardware to attach panels to racks and adjacent roof panels. The roof panels are 3 mm thick, made of Perpex Cast Acrylic, and are attached with Velcro™. They meet UL94 HB, NFP 92-307 (dripless), and BS 476 Part 7 Class 3 standards.

Small, Medium & Large Data Centers
Eaton Aisle Containment System
REC Series IT Racks
Designed for fast and easy installation, the REC
aisle containment system provides an affordable
solution for energy saving cold aisle containment
installations. This completely modular system
allows extensions or reconfigurations as a pod
changes or expands.
The system attaches to 42U or 47U high Eaton
REC Series racks, and spans 1200 mm wide
aisles. Roof panels connect to equal-width racks
on either side of the aisle, and can be cut to
install fire suppression systems.
Importantly, the REC aisle containment system
provides an energy saving envelope for Eatons
new Intelligent Power Pod
platform, which
includes UPSs, rack PDUs, power management
software, services and IT racks. With this full
suite of products, integrators can simply install
their preferred IT equipment and software
and deliver a fully integrated system to their
customer.
End-of-Row door kits include:
• Split,swing-styledoorpre-assembledwith
toughened glass window
• Doorframe
• AllhardwaretoattachdoorstoITracks
and floor
Roof panel kits include:
• Acrylicpanel
• PanelframewithVelcro
seal
• Allhardwaretoattachpanelstoracks
and adjacent roof panels
Eaton’s Aisle Containment System for the REC Series IT racks delivers
energy saving airflow management for small, medium and large data
center applications.
Technical Specifications
Rack Height,
Width x Depth (mm)
End-of-Row Doors
42U 47U
Roof Panels
600x1200 800x1200
Height 2138 mm 2367 mm 50 mm 50 mm
Width 1316 mm 1316 mm 600 mm 800 mm
Depth 53 mm 53 mm 1200 mm 1200 mm
Aisle Width 1200 mm 1200 mm 1200 mm 1200 mm
Door style Split swing door Split swing door
Door opening angle, hinges 180°, 2 lift-style hinges
Door window material Toughened glass, 4 mm
Roof panels - material Thickness: 3 mm, Perpex Cast Acrylic, attached with Velcro
Roof panels - Standards
& Classifications
UL94 HB, NFP 92-307 (dripless), BS 476 Part 7 Class 3
Rack types Doors and roof panels designed for Eaton REC series IT racks
Colour - Door & Frame Black, RAL 9005
Estimated installation time 4 hours each 4 hours each 10 minutes each 10 minutes each
Weight 56 kg 62 kg 8.8 kg 11.2 kg
Part Numbers RCACUHD12KB RCACUHD12KB RCACRP0612KB RCACRP0812KB
Eaton Aisle Containment System
© 2014 Eaton
All Rights Reserved
PS159002EN
November 2014
Eaton is a registered trademark
of Eaton Corporation.
All other trademarks are property
of their respective owners.www.eaton.eu/RECseries
2360
47U
1316
2138
42U
592 592
936
400
2036
DOOR HEIGHT
53
End-of-row door dimensions
1239
1159
596/796
55
25
Roof panel dimensions
  • Page 1 1
  • Page 2 2

Eaton RCACRP0612KB Datasheet

Category
Rack accessories
Type
Datasheet
This manual is also suitable for

Eaton RCACRP0612KB is a roof panel kit designed for use with Eaton REC Series IT racks. It provides an energy-saving envelope for Eaton's Intelligent Power Pod™ platform. The kit includes an acrylic panel, panel frame with Velcro™ seal, and all hardware to attach panels to racks and adjacent roof panels. The roof panels are 3 mm thick, made of Perpex Cast Acrylic, and are attached with Velcro™. They meet UL94 HB, NFP 92-307 (dripless), and BS 476 Part 7 Class 3 standards.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI