BYD AUTO S6, S6A, S6K Owner's Manual
Anti-theft system1-12
the following methods to apply the
intelligent access and starting function,
after the storage battery is mounted
again.
1) When the intelligent key is
available, press the micro switch
on the door handle.
2) Make wireless remote control
operation.
3) Insert the mechanical key into the
lock hole in the driver door and turn
the key.
If the intelligent access and starting
function is abnormal, please take
all intelligent keys to the BYD auto
sales service stations for
inspection.
Anti-theft System
Anti-theft setting system
1.When the engine is stopped and all
doors are locked (anti-theft setting
isn’t available for center control), the
anti-theft indicator light will remain on.
The anti-theft system will be set
automatically after 10 seconds. The
anti-theft indicator light will start
flashing after the system is set.
2. Make sure the indicator light is
flashing before you leave the car.
If anyone in the car unlocks the door,
the anti-theft system alarm will be
activated. So do not leave anybody in
the car when the system is set.
Alarm triggering
After the system is set, it will give out
an alarm in the following cases:
1) Any door or the front cabin lid is
opened without using the intelligent
key access function or the wireless
remote control function.
2) The power supply is turned on
when the intelligent key starting
function is not used.
Disable Anti-theft System
You can use the following means to
disable anti-theft alarm:
1) Unlock doors with the remote
control function.
2) Unlock doors with the micro switch.
3) Press the start button and detect
the key.
Finding Car Operation
When the car is in the anti-theft state,
the alarm will make a long sound and
the steering signal lights will flash for
15 s by holding the locking button.