SereneLife SLSFE348 User manual

Brand: SereneLife

Model: SLSFE348

Type: User manual

This manual is also suitable for

AZSLSFE348

SereneLife SLSFE348 is an intelligent electronic safe designed to provide secure storage for your valuables. With its sturdy construction and advanced security features, this safe offers peace of mind and protection against unauthorized access.

Key Features:

Electronic locking system with customizable user and master codes for secure access.
Emergency backup key allows access in case of forgotten codes or electronic malfunctions.
Tamper alarm triggers an alert if the safe is moved or tampered with, deterring potential theft attempts.
Hidden code display protects your code from prying eyes, ensuring added security.

Key Features:

Electronic locking system with customizable user and master codes for secure access.
Emergency backup key allows access in case of forgotten codes or electronic malfunctions.
Tamper alarm triggers an alert if the safe is moved or tampered with, deterring potential theft attempts.
Hidden code display protects your code from prying eyes, ensuring added security.

Models: SLSFE348

INTELLIGENT

ELECTRONIC SAFE

USER MANUAL

Please do not keep emergency keys in your safe!

DIAGRAM

Dear valued customer,

Thank you for choosing our products! You’ve taken an important step in organizing and

protecting your most valued possessions. Every series of our safes is professionally made

and designed to provide safety. Please take time to read and familiarize yourself with the

proper operating procedures of your new safe presented on the following pages.

Again, thank you for choosing our products!

NOTE: Finish operation, pull out the emergency key and keep it in a safe place.

NOTE: Change the batteries when LCD displays “LO-BATTE”.

NOTE: The initial user code is “1234”, the initial master code is “123456”. If the

code is wrong , LCD displays “ERROR”,and back to “----”. If the wrong code is en-

tered 3 times consecutively, an alarm will sound for 20 seconds and the safe will

be locked out for 3 minutes. You may press the key “*” to clear any incorrect digit

you have input.

OPENING YOUR SAFE FOR THE FIRST TIME

INSERTING THE BATTERIES

OPENING THE DOOR

CLOSING THE DOOR

Upon rst opening, users should open the safe with the emergency key. The operation

in details refers to “opening the safe with the emergency key”.

• Remove emergency lock cover, then insert the emergency key, and turn it

counterclockwise.

• Turn the knob (master key) clockwise to open the door.

• Open the door with the emergency key.

• Insert 4AA batteries into the battery compartment.

• With power supply rstly, LCD scans, then displays "GOOD", and goes to sleep.

• The safe is ready.

• Press the “#” key.

• Input your user code (3 to 8 digits), then press “#” key to conrm and LCD displays “OPEN”.

• Turn the knob clockwise and open the door within 6 seconds.

• Turn the knob (master key) counter-clockwise to close the door.

SETTING THE MASTER CODE

SECURITY DISPLAY FEATURE

TAMPER ALARM

• With the door open, press “#” key to start the keypad, then press "0" twice, and then

press reset button once, LCD will show "------" with "BI" sounds twice.

• Input your new master code(3-8 digits), and press "#" to conrm.

• LCD will read “IN”,which means the new code is accepted successfully.

Your safe is equipped with a security display feature, using this feature means that

your code will not be displayed on screen when opening safe.

• Press “#” to startup the lock.

• Press “*” in touch screen to startup the hidden code function. Any code you input

will show “----“in the display, which can ensure your code safe.

• You can press “*” twice to cancel this function.

• You may set a tamper alarm that will sound if anyone attempts to move or attack

the safe.

• Press the “*” key, the display will show “ALERT on”.

• The safe will alarm when it is vibrated. To turn alarm o, press the “#” key, input the

current code, and then press “#” to conrm. If code is wrong though, the alarm will

stop after 20 seconds, but the warning state is not released (It will alarm once it is

vibrated).

SETTING THE USER CODE

• With the door open, press the reset button once, LCD will show “------” with “BI” sounds.

• Input your new user code(3-8 digits), press “#” key to conrm.

• LCD will read “IN” with “DI-DU” sounds, which means the new code is accepted

successfully.

OPENING THE SAFE IN AN EMERGENCY

MOUNTING METHOD

Upon rst receipt of the safe, or either the electronic circuit malfunction or codes un-

known. You could also use the emergency key to open the safe.

• Remove the cover of the emergency lock.

• Insert the emergency key to the key hole, turn counter-clockwise, then turn the knob

(master key) clockwise to open the door.

• Fix the safe in the place which is not easy to move.

• Drill holes for expansion bolts (or clamping screws) in the right place.

• Turn the expansion bolts counter clockwise to separate.

• Use the expansion bolts (or clamping screws) to secure the case to the wall.

• Make sure the case is mounted in place as required and then tighten all screws.

CAUTION: Use the expansion bolt when there is a concrete wall surface. Use the

clamping screw when there is a wooden wall surface.

SereneLife SLSFE348 User manual

Brand: SereneLife

Model: SLSFE348

Type: User manual

This manual is also suitable for

AZSLSFE348

Key Features:

Electronic locking system with customizable user and master codes for secure access.
Emergency backup key allows access in case of forgotten codes or electronic malfunctions.
Tamper alarm triggers an alert if the safe is moved or tampered with, deterring potential theft attempts.
Hidden code display protects your code from prying eyes, ensuring added security.

Download PDF

report

SereneLife SLSFE348 User manual

This manual is also suitable for

SereneLife SLSFE348 User manual

Related papers

Other documents