Elo Touch Solution Entuitive 1229L User manual

Touchmonitor User Guide

For 12” LCD Desktop

1229L

Elo Touchmonitor

User Guide

12.1" LCD Touchmonitor with Optional Mag

Stripe Reader, Finger Print Reader and Rear

Facing Customer Display

ET1229L Series

Revision B

P/N 008577

Elo TouchSystems, Inc.

1-800-ELOTOUCH

www.elotouch.com

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or by any means,

including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise with-

out prior written permission of Elo TouchSystems.

Disclaimer

The information in this document is subject to change without notice. Elo TouchSystems makes

no representations or warranties with respect to the contents hereof, and specifically disclaims

any implied warranties of merchantability or fitness for a particular purpose. Elo TouchSystems

reserves the right to revise this publication and to make changes from time to time in the content

hereof without obligation of Elo TouchSystems to notify any person of such revisions or changes.

Trademark Acknowledgments

IntelliTouch, SecureTouch, AccuTouch, and MonitorMouse are trademarks of Elo TouchSystems.

Other product names mentioned herein may be trademarks or registered trademarks of their

respective companies. Elo TouchSystems claims no interest in trademarks other than its own.

Chapter 3

Operation 31

About Touchmonitor Adjustments ..............................31

Controls and Adjustment ............................................33

OSD Lock/Unlock ......................................................33

Power Lock/Unlock..............................................33

OSD Menu Functions ..........................................33

OSD Control Options ...........................................34

Contrast .........................................................34

Brightness......................................................34

V-Position.......................................................34

H-Position ......................................................34

Recall Defaults...............................................34

Color Temperature .........................................34

Volume ...........................................................34

Sharpness......................................................34

Phase.............................................................35

Clock..............................................................35

OSD H-Position .............................................35

OSD V-Position..............................................35

OSD Time ......................................................35

Auto Adjust.....................................................35

OSD Language ..............................................35

Image Information...........................................35

Power.............................................................35

Power LED Display & Power Saving ...................35

General Power Saving Mode .........................35

Display Angle .............................................................36

Chapter 4

Troubleshooting 37

Solutions to Common Problems.................................37

Appendix A

Native Resolution 39

Appendix B

Touchmonitor Safety 41

Care and Handling of Your Touchmonitor ..................42

Chapter 1

Introduction 1

Product Description ...................................................1

Detailed LCD Display Performance

Requirements.............................................................2

Customer Display ......................................................3

Serial Version.............................................................3

Fingerprint Reader .....................................................3

Theory of Operation ...................................................4

Sensor Specifications ................................................4

Credit Card Reader ....................................................4

Six Port USB Hub ......................................................5

External 12 VDC Power Supply .................................5

Chapter 2

Installation and Setup 7

Unpacking Your Touchmonitor...................................7

Product Overview ......................................................8

Main Unit ..............................................................8

Rear View ............................................................8

Side View .............................................................9

Base Bottom View................................................9

Kensington™ Lock...............................................10

Serial Interface Connection ........................................11

Remove the Back Cover......................................11

Serial Connection Option .....................................13

USB Interface Connection ...................................19

Replace the Back Cover ......................................23

Optimizing the LCD Display .......................................24

Installing the Peripheral Device Drivers .....................24

Finger Print Reader ..............................................24

Magnetic Stripe Reader........................................25

Testing the Serial Version ..............................25

Testing the USB MSR Keyboard Emulation...25

Testing the USB-HID Class MSR..................25

Rear Facing Customer Display..................................26

Serial Customer Display ......................................26

USB Customer Display........................................26

Installing the Touch Driver Software ..........................27

Installing the Serial Touch Driver .........................28

Installing the Serial Touch Driver for Windows

XP, Windows 2000, Me, 95/98 and NT 4.0 ....28

Installing the Serial Touch Driver for MS-DOS

and Windows 3.1............................................29

Installing the USB Touch Driver...........................30

Installing the USB Touch Driver for Windows

XP, Windows 2000, Me and 98 ......................30

Table of Contents

Appendix C

Technical Specifications 43

Table of Contents

Display Modes ..........................................................43

Touchmonitor Specifications ......................................44

AccuTouch Touchscreen Specifications .............45

IntelliTouch Touchscreen Specifications..............46

Infrared Touchscreen Specifications ...................47

12.1" LCD Touchmonitor (ET1229L-XXWA-1-G)

Dimensions ..........................................................48

Regulatory Information 51

Warranty 55

Index 57

USB (Universal Serial Bus) Keyboard

Emulation Swipe Reader ............................................59

Port Powered Swipe Reader Technical

Reference Manual ......................................................93

MSR Device Drivers for Windows

Programming Reference Manual................................111

Serial Interface Customer Pole Display .....................211

USB Interface Customer Pole Display.......................213

Customer Displays User Manual ...............................215

USB Fingerprint Recognition Device .........................234

1-1

C H A P T E R

1

INTRODUCTION

Product Description

The 1229L is a retail terminal designed to present information to the operator and the customer. The

1229L is available in serial and USB versions. The 1229L functionally consists of a 12.1” LCD main

display with a touchscreen, an optional vacuum fluorescent display (VFD) Customer Display, an

optional fingerprint reader (USB version only), an optional credit card reader, and a 6 port USB

(USB version only) Hub. The main display element is a 12.1 inch diagonal SVGA resolution (800x600)

LCD display. The main display will consist of an LCD Display and touchscreen. Three types of

touchscreens can be selected in the 1229L as options. They are AccuTouch, Intellitouch, and IR. The

Customer Display is a twenty character two line vacuum fluorescent display (VFD). The VFD can

display 40 characters in a 20 character 2 row format. Each character is made by various fonts using

a 5x7 pixel format matrix. The fingerprint reader translates illuminated images of fingerprints into

digital code for further software processing, e.g. enrollment (fingerprint registration) and verifica-

tion (authentication of registered users). The fingerprint reader uses the SEIR method and CMOS

image sensor to capture high contrast, high resolution fingerprint images. A series of algorithms

extracts minutiae data from the image, mapping the distinguishing characteristics of fingerprint ridge

ends, splits, dots, and arches. To identify or verify a fingerprint, a proprietary matching algorithm

compares the extracted minutiae points from the input fingerprint on the optical module to a previ-

ously stored sample. The entire matching process takes roughly one second. There is a fingerprint

reader available in the USB version of the 1229L and none in the serial version of the 1229L.

1-2 Elo Touchmonitor User Guide

The credit card reader reads all three stripes on a standard credit card or drivers license. The credit

card is read by sliding the credit card, stripe side toward the display through the credit card reader

forward or backward. There is a serial credit card reader and a USB credit card reader.

The Hub provides 4 internal USB ports to be used by the credit card reader, the fingerprint reader,

the touchscreen, and the customer display. The hub also supplies two USB ports to the outside of the

back of the 1229L for external use.The hub is only used by the USB version of the 1229L. The

1229L is powered by 12 VDC from a universal type power supply brick.

Detailed LCD Display Performance Requirements

12.1” TFT LCD Display Panel

Display Format: 800 x 600

Display area 12.1” 246.0mm (H) x 184.5mm (V)

Pixel Pitch 12.1” 0.3075mm (H) x 0.3075mm (V)

Contrast Ratio 450 typical

Brightness 315 nits typical with no touchscreen; 280 nits with

AccuTouch; 315 nits with IntelliTouch; 315 nits

with IR

Response Time Tr = 20 msec/Tf =40 msec typical

Display Color 262K colors with dithering

Horizontal Viewing Angle +/- 65 degrees typical at CR=10

Vertical Viewing Angle -60/+45 degrees typical at CR=10

1-3

Video Interface Connector The video interface connector is a High density 15 pin type

HD-15.

Indicator Lamps The LCD display shall provide an indicator lamps to give the

status of the Power Management System

Audio Jack Provides for audio input signal to the stereo speakers mounted

in the 1229L.

Customer Display

The Customer Display is a twenty character two line vacuum fluorescent display (VFD). It consists

of a VFD and VFD controller. There is a serial version controller and a USB controller. The actual

VFD is common to the serial and USB versions.

Serial Version

Optical Parameters

Characters per row 20

Number of rows 2

Character 5x7 dot matrix

configuration

Character Height 9.5 mm

Character width 6.2 mm

Character ASCII

configuration

Character color Blue green

MTBF 300,000 hours

Fingerprint Reader

There is a fingerprint reader in the USB version and none in the serial version.

General Description-FDU01B is a PC peripheral FRD (Fingerprint Recognition

Device) for USB (Universal Serial Bus) connections.

1-4 Elo Touchmonitor User Guide

Specifications

Sensor SecuGen FOR

Image Capture Speed 600ms / frame

Image Transfer Speed 500Byte / ms

Pixel Resolution 356 x 292

USB Signaling Type Full Speed Type

Theory of Operation

The USB host initiates communication with the FDU01 using operation commands (Sensor LED On,

Fingerprint Capture Start and Stop). Fingerprint data are then captured by the CMOS sensor at a total

image size of 356 x 292 with 8-bit gray level. The image frame transfer speed is 500 bytes/ms. It

takes about 600 milliseconds to send one frame of image data over USB protocols.

FDU01 uses the SecuGen FOR (Fingerprint Optic Reader).

Sensor Specifications

Sensor CMOS Image Sensor

Resolution 500dpi

Verifying Time < 1sec

Image Capture Error Rate < 0.1%

Life Time Typically 40,000Hrs

Credit Card Reader

There is a serial credit card reader and a USB credit card reader.

The USB version is available in HID and Keyboard emulation versions. The reader reads all three

stripes on a standard credit card or drivers license. A green LED provides the operator with continu-

ous status of the reader operations.

Reference Standards-Conform to International Standards Organization, American National

applicable standards Standards Institute, California Drivers License, American

Association of Motor Vehicle Administrators

Message Format ACCII

Card Speed 3 to 50 IPS

MTBF Electronics 125,000 hrs; Head 1,000,000 passes

1-5

Six Port USB Hub

The Hub provides 4 internal USB ports to be used by the credit card reader, the

fingerprint reader, the touchscreen, and the customer display. The hub also

supplies two USB ports to the outside of the back of the 1229L for external use.

The hub is only used by the USB version of the 1229L. The hub meets the

following requirements:

Specification

Full compliance with USB specification 1.0, 1.1 and HID Class

Definition Rev 1.0.

Hub shall be self powered

Hub shall provide 2 external and 4 internal downstream ports with individual

port over current detection, protection and recovery. Supports both Open Host

Controller Interface (OHCI) and Universal

Host Controller Interface (UHCI).

Supports Suspend and Resume operation.

Bus fault detection and recovery.

External 12 VDC Power Supply

The 1229L shall be powered by 12 VDC from a universal type power supply

brick. The power supply shall provide the following capability:

Input voltage 100 to 240 vac

Input frequency 47 to 63 hz

Output voltage 12 vdc

Output line and load regulation +/- 2%

1-6 Elo Touchmonitor User Guide

2-7

C H A P T E R

2

INSTALLATION AND SETUP

This chapter discusses how to install your LCD touchmonitor and how to install

Elo TouchSystems driver software.

Unpacking Your Touchmonitor

Check that the following items are present and in good condition:

Touchmonitor

Brick power supply VGA cable

OR

Serial cable USB cable

(one for each option)

CD and Quick Install

Power cable US/Canada European power cable Guide

2-8 Elo Touchmonitor User Guide

Product Overview

Main Unit

Rear View

2-9

Side View

Base Bottom View

2-10 Elo Touchmonitor User Guide

Kensington™ Lock

The Kensington™ lock is a security device that prevents theft. To find out more

about this security device, go to http://www.kensington.com.

2-11

Serial Interface Connection

Your touchmonitor comes with one of the following touchscreen connector cables: Serial (RS-

232) cable or USB cable. (For Windows 98, 2000, Me and XP systems only.)

To set up the display, please refer to the following figures and procedures:

Remove the Back Cover

The cables are connected at the back of the monitor.

• To remove the cover, grasp the lip of the cover and pull towards you until it snaps off.

2-12 Elo Touchmonitor User Guide

CAUTION Before connecting the cables to your touchmonitor and PC, be sure that the

computer and touchmonitor are turned off.

NOTE: Before connecting the cables to the touchmonitor, route all the cables through the

hole in the stand as shown in the picture above.

2-13

Serial Connection Option

The following illustrations guide you step by step in connecting your

touchmonitor using a serial cable connection.

• Connect one end of the video cable to the rear side of computer and the other

to the LCD monitor. Tighten by turning the two thumb screws clockwise to

ensure proper grounding.

2-14 Elo Touchmonitor User Guide

• Connect one end of the brick power supply to the monitor and the other end

to the connector of the power cable.

• Connect the power cable to the power port in the monitor.

• After connecting the power cable, secure the cable under the cable

2-15

• Connect one end of the speaker cable to the speaker port in the computer

and the other end to the port in the monitor

• After connecting the speaker cable, secure it under the cable management

clip.

Page is loading ...

Elo Touch Solution Entuitive 1229L User manual

This manual is also suitable for

Elo Touch Solution Entuitive 1229L User manual

Related papers

Other documents