Handy Home Products 18811-4 User manual

Handy Home Products
Brand
Handy Home Products
Model
18811-4
Type
User manual
Large Square Window
An easy and attractive way to give any wooden structure its own view on the world
1 Window Opening
1. Locate area to install window, making
sure there are no studs or braces in the
way.
2. Mark an opening 22-1/2” wide by 30”
high using outside of dotted line (fig. A-1).
3. Drill 3/8” starter hole in corners. Cut
opening according to marked line (fig. A-2).
4. Place framing (LV) at top and bottom of
cutout flush with opening edges, nail through
studs into framing ends. (fig. C)
5. Position window in opening from outside
the building. Attach window using eight 3/4”
screws (fig. B).
2 Window & Trim Installation
2. Position and center vertical window trim
(DV) flush to mid-lip on the window frame.
Secure trim with (6) 4d finish nails, making
sure not to nail through the window flange.
Continue with the other side. Center trim
pieces (DT) and attach with (6) 4d finish nails
per piece.
Note that the horizontal trim (DT) piece
overhangsvertical piece (DV) on the ends by
about 3/8”.
Notice: Caulk window trim (with a
quality, paintable exterior grade caulk)
along sides and across top and bottom.
LDR 06/15/06 PL
#16600
PARTS LIST
(LV) 2 Framing 2x3x22-1/2”
(DT) 2 Hor. Trim 1x3x28-1/8”
(DV) 2 Ver. Trim 1x3x30-1/8”
1 Window
1 Hardware Kit
Part Qty. Description Size
1-800-437-0784
1
2
Inside View of Wall
For 6’ wall: 3” below doubler
For 7’ wall: 12” below doubler
30”
(76cm)
22-1/2”
(57cm)
3/8” Starter
3/4" (1.9cm)
A
B
C
D
DT
DV
DV
DT
Outside View
Inside View
LV
LV
3“ Nails
(8) 3/4” Screws; (28) Finish Nails; (8) 3” Nails
  • Page 1 1

Handy Home Products 18811-4 User manual

Handy Home Products
Brand
Handy Home Products
Model
18811-4
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents