Part No. 069649-001 Part No. 069649-001
D5020 Ganging Jumper and Clip Instruction Sheet
You can use the ganging jumper and clip to connect multiple D5020
Communications Docks together. The ganging jumper and clip kit consists of
four each of these parts:
•
Ganging jumper
•
Clip
The ganging jumper links the power between multiple communications docks.
The clip connects the docks together. Use the ganging jumpers and clips to
power up to five D5020 Communications Docks with one power cord.
Caution
To prevent electric shock or damage to your dock, do not
connect more than five docks together.
Conseil
Ne connectez pas plus de cinq stations d’accueil
ensemble.
To connect multiple docks
1. Unplug the power cord.
2. Connect the docks together by inserting a ganging jumper between each
two docks.
Ganging
jumper
D5020
Communications
dock
5020GJIS001.eps
D5020 Ganging Jumper and Clip Instruction Sheet
You can use the ganging jumper and clip to connect multiple D5020
Communications Docks together. The ganging jumper and clip kit consists of
four each of these parts:
•
Ganging jumper
•
Clip
The ganging jumper links the power between multiple communications docks.
The clip connects the docks together. Use the ganging jumpers and clips to
power up to five D5020 Communications Docks with one power cord.
Caution
To prevent electric shock or damage to your dock, do not
connect more than five docks together.
Conseil
Ne connectez pas plus de cinq stations d’accueil
ensemble.
To connect multiple docks
1. Unplug the power cord.
2. Connect the docks together by inserting a ganging jumper between each
two docks.
Ganging
jumper
D5020
Communications
dock
5020GJIS001.eps
3. Turn all the docks over and insert a clip between each two docks to secure
them together.
Clip
5020GJIS002.eps
4. Turn the docks back to the upright position. You can route the RS-232
cables and the power cord through the ganging jumpers.
Ganging
jumper
To
devices
5020GJIS003.eps
Power
cord
5. Plug the power cord into the first dock (on the
right in this illustration) in the line.
Part No. 069649-001
*069649-001*
*069649-001*
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
© 1999 Intermec
All Rights Reserved
3. Turn all the docks over and insert a clip between each two docks to secure
them together.
Clip
5020GJIS002.eps
4. Turn the docks back to the upright position. You can route the RS-232
cables and the power cord through the ganging jumpers.
Ganging
jumper
To
devices
5020GJIS003.eps
Power
cord
5. Plug the power cord into the first dock (on the
right in this illustration) in the line.
Part No. 069649-001
*069649-001*
*069649-001*
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
© 1999 Intermec
All Rights Reserved
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Intermec D5020 Instructions Manual
-
-
-
-
Intermec Trakker Antares 2420 Supplementary Manual
-
-
-
-
-