Page is loading ...
Anderic® RRAV498 Operating
Manual
Explanation of keys
1. Remote control signal transmitter
Ø Transmits infrared signals.
2. SOURCE [POWER] keys
Ø Turns on/off an external device.
SOURCE/RECEIVER key
Ø Changes the device (the unit or
external device) that is operated
with the remote control. You can
operate the unit when this key
lights up in orange, and an
external device when this key
lights up in green.
RECEIVER [POWER] key
Ø Turns on/off (standby) the unit.
3. Input selection keys
Ø Select an input source for
playback.
HDMI 1-4 (HDMI 1-4 jacks)
HDMI 5/MHL (HDMI 5/MHL jack)
AV 1-6 (AV 1-6 jacks)
V-AUX (VIDEO AUX jack on front
of panel)
USB (USB jack on front of panel)
NET (NETWORK jack – press
repeatedly to select a desired
network source)
AUDIO (AUDIO jacks)
4. Radio Keys
Ø Operate the FM/AM radio
FM (Switches to FM radio)
AM (Switches to AM radio)
MEMORY (Registers FM/AM
radio stations as presets)
PRESET (Select a preset station)
TUNING (Select the radio
frequency)
5. INFO key
Ø Selects the information displayed
on the front display
6. Sound mode keys
Ø Selects a sound mode
7. SLEEP key
Ø Switches the unit to standby
mode automatically after a
specified period of time has
elapsed (sleep timer). Press
repeatedly to set the time (120
min, 90 min, 60 min, 30 min, off)
8. SCENE keys
Ø Select the registered input source
and sound program with one
touch. Also, turns on the unit
when it is in standby mode.
9. SETUP key
Ø Displays the setup menu.
10. Menu operation keys
Cursor keys (Select a menu or a
parameter)
ENTER (Confirms a selected
item)
RETURN (Returns to the
previous screen)
11. MODE key
Ø Switches between “Stereo” and
“Mono” for FM radio reception.
Also switches the iPod operation
modes.
12. External device operation keys
Ø Let you play back and select
menus and perform other
operations for external devices.
13. Numeric keys
Ø Let you enter numerical values,
such as radio frequencies.
14. TV operation keys
Ø Let you select TV input and
volume, and preform other TV
operations.
15. CODE SET button
Ø Registers remote control codes of
external devices on the remote
control.
16. ZONE keys (HTR-5066 only)
Ø Enable/disable the audio output
to Zone A or Zone B.
★/★★ keys (HTR-4066 only)
Change the external device to be
controlled without switching the
input source.
17. OPTION key
Ø Displays the option menu.
18. VOLUME keys
Ø Adjust the volume.
19. MUTE key
Ø Mutes the audio output.
To operate external devices with the remote
control, register a remote control code for each
device before using.
Programming for external
devices
You can use the unit’s remote control to
operate playback devices if you have
registered their remote control codes. You can
also use the input selection keys to change the
playback devices that are controlled by the
remote control, because their remote control
codes are assigned to the input selections
keys.
1. See the “Code List” section below to
find the corresponding code
depending on the brand of the device
you want to register.
Ø If there are multiple remote
control codes, register the first
code in the list. If that does not
work, try the other codes.
2. Press [CODE SET] key using a
pointed object such as the tip of a
ballpoint pen.
Ø SOURCE/RECEIVER blinks
twice.
Ø Perform each of the following
steps within 1 minute. Otherwise,
the setting will be canceled. If this
happens, repeat from Step 2.
3. Press the input selection key.
Ø For example, press the HDMI 1
to set the remote control code for
the playback device connected to
the HDMI 1 jack.
4. Use the numeric keys to enter the 4-
digit remote control code.
Once the remote control code is
registered successfully,
SOURCE/RECEIVER blinks twice.
If it blinks six times, registration has
failed. Repeat from Step 2.
Resetting remote control codes
You can reset a remote control code registered
to each input selection key.
1. Press [CODE SET] key using a pointed
object such as the tip of a ballpoint pen.
Ø SOURCE/RECEIVER blinks
twice.
Ø Perform each of the following
steps within 1 minute. Otherwise,
the setting will be canceled. If this
happens, repeat from Step 1.
2. Press the input selection key you wish
to reset.
3. Use the numeric keys to enter “5098”
Once the remote control code is reset
successfully, SOURCE/RECEIVER
blinks twice. If it blinks six times,
resetting has failed. Repeat from Step 1.
Resetting remote control to factory default
settings
1. Press [CODE SET] key using a pointed
object such as the tip of a ballpoint pen.
2. Press SOURCE/RECEIVER.
3. Use the numeric keys to enter “9981”.
For additional help regarding the Anderic
RRAV498 remote control, please visit
Anderic.com/rrav498.
For additional information regarding your
receiver, please refer to your receiver’s
operating manual. Operating manuals are
available for download at
https://usa.yamaha.com.
Cite source: Yamaha® AV Receiver HTR-
5066, HTR-4066 Owner’s Manual. Available for
download at https://usa.yamaha.com
Yamaha is a registered trademark of Yamaha
Inc. Anderic is not affiliated in any way with
Yamaha Inc. Anderic is a registered trademark
of Dan’s Electronics Etc., Inc. All rights
reserved.
/
