Page is loading ...
RR-XB-01 Operating Manual
Thank you for purchasing the Anderic RR-XB-01 universal remote control. This
remote is preprogrammed to work with Xbox One ® systems and Vizio/LG TVs (for
keys ‘Power,’ ‘Mute,’ & ‘Vol +/-‘). This remote can be programmed to work any TV via
the learning method. Please refer to “Programming instructions (Via learning)”
section for instructions, no codes needed.
Downloadable (PDF) version of this manual is available at: Anderic.com/rrxb01
Installing Batteries and Wrist Strap (Diagram)
RR-XB-01 Operating Manual
Programming Insturctions (via Learning)
Note: All keys on the RR-XB-01 may be learned. Original remote is needed.
1) Press and hold the & keys simultaneously for about 3 seconds,
indicator light will light and remain on, release the keys.
2) Press and release the to be learned on the RRXB01, indicator light will flash slowly,
3) Point the original remote control head-to-head with the RRXB01, making sure the IR
(infra-red light bulb at the top edge of remote) aligns directly with the lens on the front
of the RRXB01 with a distance of about 3cm.
4) Press and hold the key on the original remote that you want the RRXB01 to learn.
The indicator light will flash 3 times to confirm and then remain on, waiting for next
entry.
5) Repeat steps 2-4 to learn other keys.
6) Press & to save and exit or remote will automatically save and exit
after 20 seconds.
Delete All Learned Keys
Press and hold & keys simultaneously for 3 seconds, indicator light will flash
RR-XB-01 Operating Manual
3 times to confirm. All learned keys have successfully been deleted.
Anderic@ is a registered trademark of Dan’s Electronics Etc., Inc. Xbox® and there logos
are registered trademarks of Microsoft Corporation in the United States and other countries.
Anderic and Dan’s Electronics Etc., Inc. is in no way affiliated with Microsoft.
/
