Workzone 11334 User manual

Brand: Workzone

Model: 11334

Type: User manual

This manual is also suitable for

11334 Laser Measure

ELECTRICAL

Laser

Distance

Measure

User Guide

Contents

Welcome Section

General Information & Safety

Instructions

Contents & Features

General Layout

Setting Up

• Installing The Battery

• Turning On/O

Operating

• Area Measuring

• Volume Measuring

• Changing Scale

Speciﬁcations

2-3.

5-6.

9-10.

11.

All Photos and Illustrations may not be reproduced or used in any manner whatsoever without the express

written permission of the copyright holder.

Welcome Section

Congratulations!

You have made an excellent choice with the purchase of this quality WORKZONE

product.

By doing so you now have the assurance and peace of mind which comes from

purchasing a product that has been manufactured to the highest standards of

performance and safety, supported by the high quality standards of Quesh Ltd.

We want you to be completely satised with your purchase, so this WORKZONE

product is backed by a comprehensive manufacturer’s 3 year warranty and

outstanding after sales service through our dedicated helpline.

We hope you enjoy using this product for many years to come.

If you require technical support or in the unlikely event that your purchase is

faulty, please telephone our helpline for immediate assistance. Faulty product

claims made within the 3 year warranty period will be repaired or replaced free

of charge provided that you have a satisfactory proof of purchase.

(keep your receipt safe)

This does not aect your statutory rights. However be aware that the warranty

will become null and void if the product is found to have been deliberately

damaged, misused and/or disassembled.

General Information &

Safety Instructions

This Laser Distance Measure is powered by 1x 9V ‘Square’ battery.

Do not dispose of batteries in your household waste.

Please contact your local authority for details on safe disposal.

Do not expose this product to damp or moist conditions.

• Never throw batteries into a re or expose to excessive heat sources.

• If batteries are swallowed, please seek immediate medical attention.

• Always ensure correct +/- battery polarity when installing batteries.

• Do not recharge non-rechargeable batteries.

Equipment, which is marked with the WEEE logo

(as shown on the left), should not be thrown away with your household

waste. Contact your local authority waste disposal department, as they

will be able to provide details of the recycling options available in your

area.

Electrical and electronic equipment (WEEE) contains materials, parts

and substances, which can be dangerous to the environment and

harmful to human health if the waste of electrical and electronic

equipment (WEEE) is not disposed of correctly.

Equipment, which is marked with the WEEE logo

(as shown on the left), should not be thrown away with your household

waste. Contact your local authority waste disposal department, as they

will be able to provide details of the recycling options available in your

area

The EU Declaration of Conformity

can be downloaded from www.quesh.co.uk.

General Information &

Safety Instructions

General Product Care

• Keep the Laser Distance Measurer dry and clean

• Avoid shock, vibrations and extreme heat

• Check the battery before use

• Please remove the battery for long term storage

• DO NOT look directly or reect the beam;

this can cause eye injury up to 50ft (15m) away

• Interferes with vision up to 1050ft (320m) away.

Can be a distraction up to 2 miles (3.2km) away

• NEVER point any laser towards an aircraft or vehicle.

• Class 2 laser are considered safe for accidental eye exposure.

• THIS IS NOT A TOY. KEEP AWAY FROM CHILDREN.

Contents & Features

Contents

1 x Laser Distance Measure

1 x 9V ‘Square’ Battery

1 x User Guide

Features

• Measures from 2ft (0.6m) up to 50ft (15.2m)

• Dual distance scales

• Instant readings

• Automatic volume calculations

• Automatic area calculations

• Auto power o

• Low power warning

• Battery powered

NO USER SERVICEABLE PARTS INSIDE

General Layout

Screen

Volume

LASER DISTANCE MEASURE

Laser

Detector

Area

+/=

Memory

Recall

Memory

Input

Scale

Laser

General Layout

SCREEN ICONS

Metric Layout

Imperial Layout

Dimension Low Battery

Metres

Squared

Total Area /

Volume

Metres

Cubed

Dimension Low Battery

Square

Feet

Total Area /

Volume

Cubed

Feet

Distance In

Feet And Inches

Distance In

Metres

Memory

Setting Up

Installing The Battery

This product is supplied with 9V ‘Square’ battery. To t the battery please

remove it from the wrapper. Slide the battery cover down to reveal the battery

bay.

Insert the 9V ‘Square’ battery in to the correct terminal connections and place it

in the bay. Replace the battery cover by sliding it back into place until it clips in.

If the

symbol is displayed on the screen please change the batteries.

Turning On/Oﬀ

To turn the Laser Distance Measure on, press the ‘READ’ button. The meter will

turn itself o after 30 seconds. The last dimensions recorded will be displayed

as long as there is adequate battery power.

Operating

Area Measuring

After the measurer has been turned on, Press the (Area) button. The ‘L’

icon will be ashing on the screen. Place the base of the measure against the

surface you want to measure from and press the ‘READ’ button for 2 seconds.

A distance will show on the top line of numbers. Next ‘W’ icon will be ashing.

Place the measurer in the required orientation and press the ‘READ’ button

again for 2 seconds to measure the next distance. The top line will show the

distance just measured. The bottom gure now shown on the screen will show

the total area.

• ADDING ADDITIONAL AREA

You can add additional area results to an existing result. To do this make the

initial reading as previously mentioned and press the ‘MEM INPUT’ button to

store the result. Press the (Area) button and take another area

measurement. Once you have this result, press the ‘MEM RECALL’ button then

press the ‘+/=’ button to add the results together. If you require to add more

results press ‘MEM INPUT’ at the end of each result to carry the gure forward

and remeasure as previously described.

Operating

Volume Measuring

After the measurer has been turned on, Press the (Volume) button. The ‘L’

icon will be ashing on the screen. Place the base of the measure against the

surface you want to measure from and press the ‘READ’ button for 2 seconds.

A distance will show on the top line of numbers. Next ‘W’ icon will be ashing.

Place the measurer in the required orientation and press the ‘READ’ button

again for 2 seconds to measure the next distance. The top line will show the

distance just measured. Finally ‘H’ icon will ash next. Place the measurer into

the next orientation and press ‘READ’ for 2 seconds. The top line will show the

distance and the bottom number will display the total volume.

• ADDING ADDITIONAL VOLUME

You can add additional volume results to an existing result. To do this make the

initial reading as previously mentioned and press the ‘MEM INPUT’ button to

store the result. Press the (Volume) button and take another set of

measurements. Once you have this result, press the ‘MEM RECALL’ button

then press the ‘+/=’ button to add the results together. If you require to add

more results press ‘MEM INPUT’ at the end of each result to carry the gure

forward and remeasure as previously described.

10.

Operating

Changing The Scale

The Laser Distance Measure can display either metric or imperial distances.

To change between them at anytime press the ‘ FT/M’ button. This will change

between the results into either scale.

11.

Specifications

Laser Distance Measure

General

Dimensions:

Approximate Weight:

Range:

Accuracy:

Battery

Battery Type:

Laser

Laser Class:

Laser Type:

Aperture Angle:

Resolution:

41mm x 28mm x 128mm

88g

2ft (0.6m) to 50ft (15.2m)

± 5%, ± 1 Digit

1x 9V ‘Square’

Class II (E.U.) / Class Illa (U.S.)

Red Diode 650nm

Approx. ± 5°

0.393” (10mm)

Warranty

This product is warranted to be free from defects in workmanship and parts for a period of 36

months from the date of purchase. Defects that occur within this warranty period, under normal

use and care, will be repaired, replaced or refunded at our discretion, solely at our option with

no charge for parts and labour. The benets covered by this warranty are in addition to all rights

and remedies in respect of the product the consumer has under existing U.K. laws.

Proof of Purchase

This warranty is valid for the original purchase and is not transferable.

Please keep your purchase receipt as proof of purchase and as proof of the date of when the

purchase was made. The receipt must be presented with the warranty card when making a claim

under this warranty.

Service during the Warranty Period

Please ensure the product is properly packaged so as to ensure that no damage occurs in

transit. Also make sure that you have included a detailed explanation of the problem.

Extent of the Warranty

This warranty is limited to defects in workmanship or parts. All defective products or parts will

be repaired or replaced. This warranty does not extend to accessories.

Normal Wear and Tear

This warranty does not cover normal wear and tear of the product or parts.

Exclusions

• Any defect caused by accident, misuse, abuse, improper installation or operation,

lack of reasonable care, unauthorised modication, loss of parts, tampering or

attempted repair by a person not authorised by the distributor.

• Any product that has been damaged by lightning strike either directly or indirectly,

or on a main’s or vehicle outlet power surge or liquid ingress.

• Any product that has not been installed, operated or maintained in accordance

with the manufacturer’s operating instructions provided with the product.

• Any product that has been used for purposes other than domestic use.

• The product if it is located outside of the U.K. and Ireland

• Any damage caused by improper power input or improper cable connection.

This warranty does not aect your statutory rights.

Warranty Certiﬁcate

YEAR

WARRANTY

Laser Distance Measure

Return your completed card to:

Quesh Limited

B7, First Business Park

First Avenue, Crewe

Cheshire

CW1 6BG

United Kingdom

Email:

[email protected]

AFTERSALES SUPPORT

MODEL: 11334 PRODUCT CODE: 11334 01/2019

01270 508538

1800 995 036 www.quesh.co.uk

IRE

Phone lines available Monday to Friday 9am - 5pm.

Call cost local rate per minute from a landline,

calls from mobiles may vary

YEAR

WARRANTY

Description of malfunction:

Your Details:

Name:

Address:

Date of purchase*:

*We recommend you keep the receipt with this warranty card.

Location of purchase:

Email:

Workzone 11334 User manual

Brand: Workzone

Model: 11334

Type: User manual

This manual is also suitable for

11334 Laser Measure

Download PDF

report

Workzone 11334 User manual

This manual is also suitable for

Workzone 11334 User manual

Related papers

Other documents