2. Dahua
  3. NVR5000-1 Series
NVR5000-1 Series

Dahua NVR5000-1 Series User guide

  • Hello! I am an AI chatbot trained to assist you with the Dahua NVR5000-1 Series User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
The following guide enables you to set up the IVS rules on
(Series 3) and (Series 5 & 7) NVR-systems.
How to set up the IVS rules, such as tripwire, intrusion,
abandoned/missing objects
TiOC HOW TO GUIDE
System Version: V4.000.10BE002.4
Build Date: 2020-09-10
NB: The firmware version is based on the latest version when this
document was created and may slightly differ from future versions,
however this will not affect any of the functionality.
Series Example
NVR5000-1 Series NVR5216-16P-1
For an NVR-system
Step 1: Go to AI > ”PARAMETERS” > ”IVS”, choose the you want to set up to receive email
alerts , keep Enabled and click Trigger icon.
TiOC HOW TO GUIDE | How to set up IVS rules
Figure 2: Draw a new Tripwire rule for IVS
2
1
Figure 1: Start from the setup page of the NVR
Step 2: For Tripwire
Go to AI > ”PARAMETERS” > ”IVS”, check so at least one “Tripwire” rule is enabled
and click Draw.
1
3
4
5
TiOC HOW TO GUIDE | How to set up IVS rulesTiOC HOW TO GUIDE | How to set up IVS rules
Step 3: Draw the target line for detection using a mouse. Then, click OK after you
have finished.
Figure 3: Draw the detection area
Figure 4: Add a new Intrusion rule for IVS
Step 2: For Tripwire
Go to AI > ”PARAMETERS” > ”IVS”, check at least one “
Intrusion
” rule is enabled
and click Draw.
2
1
3
4
5
1
2
TiOC HOW TO GUIDE | How to set up IVS rules
If you still encounter problems
operating your Dahua device,
please call +44 (0)1628 613 500
*
Design and specications are subject to change without notice.
DAHUA UK & IRELAND
Quantum, 60 Norden Road, Maidenhead, Berkshire SL6 4AY
Tel: +44 (0) 1628 613 500
[email protected]
[email protected]
Step 3: Draw the target line for detection using a mouse. Then, click OK after you
have finished.
2
1
Figure 5: Draw the detection area
Figure 6: Trigger settings
Step 4: Click Trigger to decide the detailed settings of the rule. Then, click Apply within
the trigger screen to save the trigger and click Apply at the bottom right of the screen to
save the IVS function.
1
2
3
/