2. Olimpia Splendid
  3. B1018
B1018

Olimpia Splendid B1018 User manual

  • Hello! I've reviewed the Technical Service Letter for the OLIMPIA SPLENDID MAESTRO PRO 01925 Inverter. This document provides detailed instructions on installing the B1018 Wi-Fi kit, including removing the front cabinet, locating and installing the board, and connecting the communication wire, setting up via the Maestro App. I am ready to answer your questions about the installation process.
  • Where is the B1018 Wi-Fi board located?
    Which slot should the communicating wire be plugged into?
    What Wi-Fi frequency is required for the B1018 board to operate properly?
Technical Service Letter
MAESTRO PRO INVERTER 12 HP (Model # 01925)
B1018 –Maestro Wi-Fi kit installation
Lucas Holleron
l.holleron@olimpiasplendidusa.com
(800) 408-5196 (ext. 103)
For Technical Support contact:
olimpiasplendid.com
Removing the front cabinet •3screws in the front
•2screws on top
•2Screws underneath
olimpiasplendid.com
Locate and install B1018 Wi-Fi board in designated
location seen below, which is at the top right of unit
above touch screen display.
olimpiasplendid.com
Plug in communicating
wire into slot “E” labeled
INVERTER.
olimpiasplendid.com
Route communicating wire into chase behind coil and plug into plug
under power switch.
olimpiasplendid.com
Replace front cabinetand download the Maestro
App from the app store for iPhone or Android
devices. And follow set up instructions. B1018 Wi-Fi
board will need to be on 2.4GHz to operate properly.
/