2. Sealey
  3. TS01.V2
TS01.V2

Sealey TS01.V2 User manual

  • Hello! I'm a chat assistant that has reviewed the Sealey Sheet Metal Folder TS01.V2 user manual. This document describes a bench and vice mounting sheet metal folder capable of bending 2mm steel. It also outlines safety and operating instructions, key features like the unique patented endless design and removable folding plate are detailed within this document. I'm ready to answer your questions about this product.
  • What is the maximum thickness of steel sheet this folder can bend?
    Can this folder bend any length of sheet metal?
    What is the purpose of the adjustable fold plate?
700MM VICE/BENCH MOUNTING SHEET
METAL FOLDER
MODEL NO: TS01.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9 Wearapprovedsafetygoggles,gloves,andfootwear,whenoperatingthefolder.YourlocalSealeydealeroersacompleterangeof
 safetyequipment.
9 Use the tool only for its intended purpose.
9 Regularlycheckallpartsofthefolderfordamagedparts.DO NOTuseifanyofitscomponentsarebroken,wornordamaged.
9 UseoriginalSealeysparepartsandaccessories.Useofnon-recommendedsparepartsmaybedangerousandwillinvalidate
warranty.
9 Ensure good footing, wear non slip footwear.
8 DO NOToperatethistoolwhileundertheinuenceofdrugs,alcoholorotherimpairingmedication.
8 DO NOTAllowunqualiedpersonstooperatethemetalfolder.Keepchildrenawayfromthetool.
2. INTRODUCTION
Benchandvicemountingsheetmetalfolder,ttedwithmountingplates.Capableofbendinga2mmsteelsheet,oflimitedlength,uptoand
beyonda90°angle.Theuniquepatentedendlessdesignandremovablefoldingplateallowstheusertofold,channelandosetanylengthof
sheetmetalupto1mmthick,bysimplymovingthesheetasrequiredaftereachfold.Withadjustablefoldplatetohelpachievethecleanest
foldpossible.Idealforthesmallgarageorrestorationoperation.
3. SPECIFICATION
MODEL NO: ............................................................ TS01.V2
Capacity: .................................. 20GaugeSheet,Ø1mmRod
4. OPERATION
4.1. Unpack the unit and check that all parts are included and not
damaged.Shouldyouexperienceaproblemcontactyour 
 supplierimmediately.
4.2.  Positionfolderonbenchwhereitistobemounted,ensuring
 thatthehandles(g.1.7)hangverticallyoverthefrontofthe
 bench,usefootplates(g.1.6)astemplatestodrillholesin
 bench,useappropriatexings.Orclampfolderinvice.
4.3.  Byusingcentreadjustmentnut(g.1.4)ensuretopandbase
 plateareparallel,thismayrequireadjustmentfromtimetotime.
4.4.  Releaseclamps(g.1.1)ateitherendoffoldersothatasmall
 testpieceofsheetmetalcanbeinsertedbetweenthetopandbaseplates.(g.1.3)
4.5. Positionthetestpiece,adjustthetopplatebyuseofclamps(g.1.1)lightlytighten,useaspannertoadjustcam(g1.2),sothat 
 baseandtopplatearealigned.
4.6.  Ensurethatthereisevenpressureonbothends.
4.7.  Raisethetopfoldingplate(g.1.3)byliftinghandlestocreatethefold.Fromthistest,youwillbeabletodeterminehowandwhere
the fold appears.
4.8.  Whensatisedwiththetestresults,proceedwiththeactualworkpiece.
4.9.  Byrotatingtheendclampsthroughtheverticalaxis,longerlengthsofmetalsheetcanbefolded,i.e.foldasection,unclamp,move
 sheet,reclamp,foldsecondsectionetc.
1 Top/Baseplateclamp
2Adjustment/PositioningCam
3RemovableFoldingPlate
4 Centreadjustmentnut
5Top Plate
6 Footplatewithxingholes
7 Folding Handles
g.1
TS01.V2Issue109/05/2022
Original Language Version
©JackSealeyLimited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
1
6
2
7
3 4 5
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
Original Language Version
©JackSealeyLimited TS01.V2Issue109/05/2022
Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponent
parts without prior notice. Pleasenotethatotherversionsofthisproductareavailable.Ifyourequiredocumentationfor
alternativeversions,pleaseemailorcallourtechnicalteamontechnical@sealey.co.ukor01284757505.
Important:NoLiabilityisacceptedforincorrectuseofthisproduct.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim. REGISTER YOUR
PURCHASE HERE
/