OIL HOSE END GUN
MODEL NO: AK4564D.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using this
equipment.
9 Familiariseyourselfwithproductapplicationandlimitations,aswellasthespecicpotentialhazardspeculiartothisproduct.
9 Maintainthepumpstationingoodcondition(useanauthorisedserviceagent).
9 Replaceorrepairdamagedparts.Use genuine parts only. Non authorised parts will invalidate the warranty.
9 UseonlytodispenselubricantsuptoSAE150viscosity.
9 Ensuresafetyeyeprotectionandprotectiveclothingarewornwhenusingthisproduct.
9 Keeptheworkareaclean,unclutteredandensurethereisadequatelighting.
9 Maintaincorrectbalanceandfooting.Ensuretheoorisnotslipperyandwearnonslipshoes.
9 Keepchildrenandunauthorisedpersonsawayfromtheworkingarea.
9 Afteruse,drainanyuidsfromtheequipmentbeforestorage.
9 Disposeofwasteliquidsinaccordancewithlocalauthorityregulations.
9 Disconnectairpressurefromequipmentwhennotinuse.
8 DO NOT exceedthemaximumworkingpressureof1500psi.
8 DO NOT pointthenozzleatpeopleoranimals.
8 DO NOT usetheequipmentnearopenames.
8 DO NOT smokewhilstusingthisequipment.
8 DO NOT usetoextractcorrosiveuids.
8 DO NOTdismantle,tamperwithoradaptthegunforanypurposeotherthanforwhichitisdesigned.
8 DO NOT usetheunitifithasbeendroppedormishandled,checktheunittoensurethereisnodamage.
9 Keepthegunandnozzlecleanandstoreinasafedry,childprooflocation.
WARNING! DO NOT allow uncontrolled discharge of uids thus polluting the environment. All liquids must be disposed of according to
local authority regulations.
2. INTRODUCTION
Robustoildispensinggunincorporatingmanualshuto.Fittedwithrigidextension,handlelockandnon-dripnozzle.
Pleasenotethatthisgunisnotapprovedforresaleofoil.
3. SPECIFICATION
Model no............................................................AK4564D.V2
Max.owrate............................................................ 35L/min
Inletsize....................................................................1/2”BSP
Max.outputpressure.................................................1500psi
4. ASSEMBLY
4.1. Attachthenozzleassemblytothegun.
4.2. Insertthelterintotheinletconnectionandthenattach
thesupplyhose.
NOTE: DO NOT over tighten the inlet swivel connection or
damagemayresult.
Refer to
instruction
manual
Wear
protective
gloves
Wear eye
protection
Wear
protective
clothing
Original Language Version
© Jack Sealey Limited AK4564D.V2Issue:119/04/21