Sealey TP6801.V3 User manual

Sealey
Brand
Sealey
Model
TP6801.V3
Type
User manual

Sealey TP6801.V3 is a heavy-duty high flow lever pump, suitable for pumping non-corrosive fluids such as oil, anti-freeze, degreasers, solvents, agricultural and industrial chemicals. With a flow rate of approximately 400ml per stroke, it is ideal for transferring large quantities of liquids quickly and efficiently. The pump is self-priming and can be used with drums ranging from 50 to 205L. It comes with two delivery nozzles, one standard swan neck and one acute angle with a filter for removing impurities.

Sealey TP6801.V3 is a heavy-duty high flow lever pump, suitable for pumping non-corrosive fluids such as oil, anti-freeze, degreasers, solvents, agricultural and industrial chemicals. With a flow rate of approximately 400ml per stroke, it is ideal for transferring large quantities of liquids quickly and efficiently. The pump is self-priming and can be used with drums ranging from 50 to 205L. It comes with two delivery nozzles, one standard swan neck and one acute angle with a filter for removing impurities.

HEAVY-DUTY HIGH FLOW LEVER PUMP
MODEL NO: TP6801.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
TA
NT:
PLEA
S
E READ THE
S
E IN
S
TRU
C
TI
O
N
S
C
AREFULLY. N
O
TE THE
S
AFE
O
PERATI
O
NAL RE
Q
UIREMENT
S
, WARNIN
GS
&
C
AUTI
O
N
S
. U
S
E
HE
P
PR
O
ODU
C
T
CO
RRE
C
TLY AND WITH
C
ARE F
O
R THE P
U
RP
OS
E F
O
R WHI
C
H IT I
S
INTENDED. FAIL
U
RE T
O
D
O
SO
MAY
C
A
US
E DAMA
G
E AND
/O
R
PE
ER
S
SON
N
AL IN
JU
RY AND WILL INVALIDATE THE WARRANTY. KEEP TH
ESE
IN
STR
UCT
ION
S S
AFE
FO
R F
U
T
U
RE
USE
.
1. SAFETY
WARNING! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using
this equipment.
9 Familiarise yourself with product application and limitations, as well as the specifi c potential hazards peculiar to this product.
9 Maintain the pump in good condition (use an authorised service agent).
9 Replace or repair damaged parts. Use genuine parts only. Non authorised parts will invalidate the warranty.
9 Use only to pump NON-Corrosive fluids such as oil, anti-freeze, degreasants, solvents, agricultural and industrial chemicals.
9 Ensure safety eye protection and protective clothing are worn when using this product.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.
9 Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
9 Keep children and unauthorised persons away from the working area.
9 Dispose of waste liquids in accordance with local authority regulations.
8DO NOT use to extract corrosive fl uids.
8DO NOT dismantle, tamper with or adapt the pump for any purpose other than for which it is designed.
8DO NOT use the unit if it has been dropped or mishandled, check the unit to ensure there is no damage.
8DO NOT use the pump as a handle to move the fluid drum.
9 Keep the pump clean and store in a safe dry, childproof location.
8WARNING! DO NOT allow uncontrolled discharge of fluids thus polluting the environment.
2. INTRODUCTION
Steel barrelled, self-priming lever pump. Supplied with 2”BSP adaptor and dip tube suitable for 50 to 205L drums. Suitable for oils, antifreeze,
degreasers and other non-corrosive fl uids. High fl ow unit delivers approximately 400ml per stroke. Supplied with two delivery nozzles, one
standard swan neck and one acute angle with fi lter for removing impurities from fl uids.
3. OPERATION
3.1. Attach the required discharge spout (fi g.1, fi g.2) to the pump ensuring that seal between spout and pump body is correctly fi tted.
3.2. Screw the suction tube into the underside of the pump, attach extension tube with seals as required (fi g.3).
3.3. Insert the pump into the 2” BSP drum opening and hand tighten.
3.4. Pump handle up and down to dispense liquid.
TP6801.V3 Issue 1 12/07/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
fi g.1 fi g.2 fi g.3
4. MAINTENANCE
4.1. Ensure all liquid is removed from pump before storage.
4.2. Clean out pump before using on other liquids.
4.3. Store in a safe dry, childproof location.
TP6801.V3 Issue 1 12/07/21
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
  • Page 1 1
  • Page 2 2

Sealey TP6801.V3 User manual

Sealey
Brand
Sealey
Model
TP6801.V3
Type
User manual

Sealey TP6801.V3 is a heavy-duty high flow lever pump, suitable for pumping non-corrosive fluids such as oil, anti-freeze, degreasers, solvents, agricultural and industrial chemicals. With a flow rate of approximately 400ml per stroke, it is ideal for transferring large quantities of liquids quickly and efficiently. The pump is self-priming and can be used with drums ranging from 50 to 205L. It comes with two delivery nozzles, one standard swan neck and one acute angle with a filter for removing impurities.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers