Feiss OL14407SBL Installation guide

OL14407SBL
Feiss
Brand
Feiss
Model
OL14407SBL
Type
Installation guide
1
Outdoor
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
This instruction shows a typical installation.
1
2
1A
3
4
5
Installation Instructions for
Galena Outdoor Post
1.0
O 14406-L OL14407
OL14406, OL14407
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Screw the fixture loop to the top of the fixture.
Install the candle tube by sliding it over the socket.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Place the housing over the housing base, and secure it in place using the housing screws.
POST
POST SCREW
6
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2
3
4
CANDLE TUBE
HOUSING BASE
HOUSING SCREW
4
HOUSING
LAMP
SOCKET
7
FIXTURE LOOP
8
Page is loading ...
Page is loading ...
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.969.3347
www.Feiss.com
© 2018 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss OL14407SBL Installation guide

OL14407SBL
Feiss
Brand
Feiss
Model
OL14407SBL
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents