WiebeTech Forensic LabDock S5 User manual

Brand: WiebeTech

Model: Forensic LabDock S5

Category: Computer cases

Type: User manual

This manual is also suitable for

Forensic LabDock U5

Protecting Your Digital Assets

Wiebetech Branding

2c85m76y

PMS 711C

66c7m7y

PMS 299C

Product Name:

Univers 73 Black Extended

abcdefghijklmnopqrstuvwxyz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

Forensic Labdock

™

S5 and U5

User Manual

Features

• Easyattachmentandwrite-blockedaccessto2.5”and3.5”IDE/PATAandSATAhard

drives.

• Write-blockedaccesstoUSBthumbdrives(U5modelonly).

• AccessSASdrivesviaaRedPort

™

SASwrite-blockedPCIehostbusadapter(S5model

only).

• Convenientstoragecubbykeepsyourdrivesoutofthewayduringimaging.Aquietfan

keepsthecubbycool.

• Recognizesandreportsthepresenceofahiddenarea(HPAorDCO)ontheharddrive.

IncludedsoftwareutilitycanbeusedtoconguretheForensicLabDocktohandlethese

hiddenareasinthewayyouprefer.

• EightlabeledLEDindicatorsreportreal-timeoperationalstatus.

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

1 PRE-INSTALLATION STEPS

1.1 PACKAGE CONTENTS

Thefollowinglistcontainstheitemsthatareincludedinthe

completecongurationforthisdevice.PleasecontactCRUif

anyitemsaremissingordamaged:

Accessories

Model

ForensicLabDock 1 1

4-pinLegacyMolexpowercable 1 1

IDEcablefor3.5”drives(40-pinto40-pin) 1 1

SATAdata/powerconnector 1 1

USBA-typetoB-typecablewithbracket 1 0

USBB-typeto10-pinheadercable 1 0

Packetofscrews 1 1

QuickStartGuide 1 1

1.2 IDENTIFYING PARTS

Takeamomenttofamiliarizeyourselfwiththepartsofthe

ForensicLabDock.Thiswillhelpyoutobetterunderstandthe

followinginstructions.

TABLE OF CONTENTS

1Pre-InstallationSteps 2

1.1PackageContents 2

1.2IdentifyingParts 2

1.3LEDBehavior 3

1.4WarningsandNotices 3

2InstallationSteps 4

2.1CongureHPA/DCOMode 4

2.2InstalltheForensicLabDockIntoYourComputer 4

2.3ConnectingHardDrivestotheForensicLabDock 5

2.3.1SATAHardDrives 5

2.3.2IDE(PATA)HardDrives 5

2.3.3SASHardDrives(AvailableonlyonS5models) 6

2.3.4USBThumbDrives(AvailableonlyonU5models) 6

2.3.5USBDriveEnclosures(AvailableonlyonU5models) 6

2.3.6OtherTypesofDrives 6

3HotswappingwithMacandWindowsOperatingSystems 7

3.1MacOSX 7

3.2WindowsOperatingSystems 7

4UpdatingFirmware 8

5ForensicSoftwareUtility 8

6FAQ 8

7TechnicalSpecications 9

Write-Blocked

IDEConnector

Drive

Activity

LED

Power

LED

FRONT OF THE S5 MODEL

Write-Blocked

eSATAConnector

SAS

Pass-through

Connector

IDE/SATA

Write-Block

StatusLED

HardDrive

Cubby

Power

Switch

Molex

powerconnector

HPA/DCO

Indicator

FanFail

Indicator

PowerFail

Indicator

Error

Indicator

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

1.3 LED BEHAVIOR

LED COLOR STAT E DESCRIPTION

Power Green Solid

TheForensicLabDock

ispoweredon.

DriveActivity Amber

Solidor

Blinking

Theattacheddriveis

beingaccessed.

Error

Indicator

Red Solid

Theattacheddrivehas

reached131°F/55°C,

oranHPA/DCO-related

diskcommandhas

failed.

PowerFail

Indicator

Red Solid

Thereisaproblemwith

eitherthe+5Vor+12V

poweroutputtothe

attacheddrive.

HPA/DCO

Indicator

Amber Solid

AnHPAorDCOarea

hasbeendetected.

Oncelit,itwillnotbe

unlituntiltheLabDock’s

poweriscycled.

FanFail

Indicator

Red Solid

Thecoolingfanhas

stoppedworkingand

needsreplaced.Please

contactCRUTechnical

Support.

USBWrite-

BlockStatus

Amber Solid

TheattachedUSBde-

viceiswrite-blocked.

IDE/SATA

Write-Block

Status

Amber Solid

TheattachedIDEor

SATAdriveiswrite-

blocked.

*ThisLEDappearsonlyontheForensicLabDockU5.

1.4 WARNINGS AND NOTICES

Pleasereadthefollowingbeforebeginninginstallation.

General Care

• ThemaincircuitboardoftheForensicLabDockissus-

ceptibletostaticelectricity.Propergroundingisstrongly

recommendedtopreventelectricaldamagetotheenclo-

sureorotherconnecteddevices,includingthecomputer

host.Avoidalldramaticmovement,tappingontheunit,

andvibration.

• Avoidplacingtheharddrivesclosetomagneticdevices,

highvoltagedevices,ornearaheatsource.Thisincludes

anyplacewheretheproductwillbesubjecttodirect

sunlight.DoNOTallowwatertomakecontactwiththe

driveortheForensicLabDock.

PowerConnector

REAR OF THE S5 FLDs MODEL

SATADataConnector

ForFrontSATA/IDE

Connections

SATA&PATA

Firmware

CongurationPort

SASPass-through

DataConnectorto

RedPortHBACard

PowerConnector

REAR OF THE U5 MODEL

SATADataConnector

ForFrontSATA/IDE

Connections

SATA&PATA

Firmware

CongurationPort

Write-BlockedUSB

Pass-throughConnector

Write-Blocked

IDEConnector

Drive

ActivityLED

Power

LED

FRONT OF THE U5 MODEL

Write-Blocked

eSATAConnector

Write-Blocked

USBConnector

IDE/SATA

Write-Block

StatusLED

HardDrive

Cubby

Power

Switch

Molex

powerconnector

HPA/DCO

Indicator

FanFail

Indicator

PowerFail

Indicator

USB

Remount

Button

USBWrite-Block

StatusLED

Error

Indicator

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

• Beforestartinganytypeofhardwareinstallation,pleaseensurethatallpowerswitcheshavebeen

turnedoffandallpowercordshavebeendisconnectedtopreventpersonalinjuryanddamagetothe

hardware.

2 INSTALLATION STEPS

TheForensicLabDockrequiresaSATAdataconnectioninsideyourcomputer.TheU5modelalso

requiresaUSBdataconnectionforthewrite-blockedUSBport,andtheS5modelrequiresaSAS

connectiontoaRedPortSASwrite-blockedPCIehostbusadapter(HBA).Ifyoudonotalreadyhave

thenecessaryconnectorsinsideofyourcomputer,youmustaddanHBAcardwiththeappropriate

connectorsintoanemptyexpansionslotinsideyourcomputer.

2.1 CONFIGURE HPA/DCO MODE

TheForensicLabDockgivesyoutheabilitytoselectthewayhiddenareasonharddrives(HPAsandDCOs)

arehandled.TheForensicLabDockwillonlynotifyyoubydefaultofthepresenceofthesehiddenareasby

blinkingtheHPA/DCOLEDindicator.Othermodesallowyoutoviewtheinformationinthesehiddenareas.

Tochangemodes,followthestepsbelow.Ifthedefaultbehaviorissatisfactory,continuetoSection2.2.

a. ConnectaUSBcablefromyourcomputertothe“SATA&PATAFirmwareCongonly”USBporton

therearoftheForensicLabDock.YoumayndthiseasiesttodobeforeinstallingtheForensicLabDock

insideacomputer.

b. ConnectaSATApowercablefromthecomputer’spowersupplytotherearoftheForensicLabDock.

c. Flipthepowerswitchtothe1positiontopowertheForensicLabDockon.

d. DownloadandinstalltheForensicSoftwareUtility—afreesoftwareapplicationdesignedforusewith

theForensicLabDock:www.cru-inc.com/support/software-downloads/forensic-software-utility/

e. OpentheForensicSoftwareUtilityandnavigatetotheHPA/DCOBehaviortab.

f. Selectthedesiredbehavior(leavetheminplace,removeHPAtemporarilybutignoreDCO,removeHPA

permanentlybutignoreDCO,orpermanentlyremovethemboth).

g. ClicktheSetHPA/DCOBehaviorbutton.

h. TurntheForensicLabDockoffandunplugitfromtheUSBandSATApowercables.

2.2 INSTALL THE FORENSIC LABDOCK INTO YOUR COMPUTER

a. MounttheForensicLabDockintoanempty5.25”drivebayinsideofyourcomputer.Donotscrewitinto

placeuntilallthecableshavebeenconnected.

b. ConnectaSATApowercablefromthecomputer’spowersupplytotherearoftheForensicLabDock.

c. AttachtheSATAdatacablefromyourcomputersystemtotherearoftheForensicLabDock.

d. Connecttheremainingopendataport(USBontheU5modelandSATAontheS5model)ontherearof

theForensicLabDocktoyourcomputersystem.ThereareseparatewaystoconnectforbothSATAand

USBdevices,whicharedetailedonthenextpage.

BothmodelscontainaUSBportthatisusedforrmwarecongurationonly.UsetheUSBportonthe

farrightthatislabeled“ConnectUSBForFrontPanelUSBWriteBlocker”instead.

STOP!

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

ForUSB,therearethreewaystoconnect:

• Ifyourmotherboardhasanavailable10-pinUSBheader,usethe“USBB-typeto10-pinheader”

cable.

• UseaUSBB-typetoB-typecabletoconnecttoaUSBhostcard.

• UseaUSBB-TypetoA-typecableandattachtheA-typeendtoanavailableUSBportonyourcom-

puter.

ForSATA:

• ConnectaSATAdatacabletotherearoftheForensicLabDockandtheotherendtoanavailableport

onyourwrite-blockedRedPortSASHBAcard.

Connectingthepass-throughporttoanyhostotherthanaRedPortcardwillresultinthecorre-

spondingfrontpanelportbecomingread/writeratherthanwrite-blocked.

e. UsetheprovidedscrewstosecuretheForensicLabDockintothe5.25”drivebay.

Usingscrewsotherthantheprovidedmountingscrewsmayputpressureonthedrivecubby,making

itdifculttoinsertandremovedrivesfromit.Alwaysusetheprovidedmountingscrewswherepos-

sible.

YourForensicLabDockisnowreadytouse!

2.3 CONNECTING HARD DRIVES TO THE FORENSIC LABDOCK

2.3.1 SATA Hard Drives

a. Inserttheharddriveintothecubby.Facethepoweranddataconnectionsideoutward.

b. AttachtheincludedSATAdata/powerconnectortotherearofthedrive.

c. Connectthe4-pinpowercableontheSATAdata/powerconnectortothepowerportonthefrontof

theForensicLabDock.

d. ConnecttheeSATAdatacableoftheSATAdata/powerconnectortothewrite-blockedeSATAport

nexttothepowerswitchonthefrontoftheForensicLabDock.

e. Flipthepowerswitchtothe1positiontopowertheForensicLabDockon.

2.3.2 IDE (PATA) Hard Drives

a. Inserttheharddriveintothecubby.Facethepoweranddataconnectionsideoutward.

b. Attachtheincludedappropriately-sizedIDEcableandtheincluded40-pinlegacyMolexpowercable

toyourharddrive.Bothconnectorsarekeyedtotonlyoneway.

c. RemoveanyeSATAconnectorfromtheeSATAportnexttothepowerswitchonthefrontofthe

ForensicLabDock.IDE/PATAdrivescannotberecognizedifaSATAconnectionisdetected.

d. ConnecttheotherendsoftheIDEcableandthe40-pinlegacyMolexpowercabletotheappropriate

write-blockedportsonthefrontoftheForensicLabDock.

e. Flipthepowerswitchtothe1positiontopowertheForensicLabDockon.

NOTE

STOP!

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

2.3.3 SAS Hard Drives (Available only on S5 models)

a. Inserttheharddriveintothecubby.Facethepoweranddataconnectionsideoutward.

b. AttachtheincludedSATAdata/powerconnectortotherearofthedrive.

c. Connectthe4-pinpowercableontheSATAdata/powerconnectortothepowerportonthefrontof

theForensicLabDock.

d. ConnecttheeSATAdatacableoftheSATAdata/powerconnectortothe“SASPassThru”portabove

the4-pinlegacyMolexpowerportonthefrontoftheForensicLabDock.

e. Flipthepowerswitchtothe1positiontopowertheForensicLabDockon.

2.3.4 USB Thumb Drives (Available only on U5 models)

a. Plugthedeviceintothe“USBWriteBlocker”portonthefrontoftheForensicLabDock.

b. IfthedevicehasanOn/Offswitch,turniton.

c. Flipthepowerswitchtothe1positiontopowertheForensicLabDockon.

Ifthecomputerfailstorecognizethethumbdrive,cyclethethumbdrive’spower(butremovingand

reinsertingitorswitchingitoffandonagain)andthenpresstheRemountbutton.

2.3.5 USB Drive Enclosures (Available only on U5 models)

ThisfeatureisusefulforpreviewingthecontentsofaUSBdriveenclosuretodetermineifitcontains

digitalevidencethatyouneedtoacquire.Ifitdoes,youcanthendecidewhethertoacquiretheevi-

dencethroughtheUSBconnectionortoopenthedriveenclosureandattachthebareharddrivetothe

ForensicLabDockwithanIDEorSATAwrite-blockedconnection.

SupportedUSBdriveenclosureshavethefollowingcharacteristics:

• Areseenasasinglephysicaldevicebyyourcomputer’sOS

• ArepoweredbyanACadapteroranextraUSBbuspowercable

ConnectthedriveenclosuretotheForensicLabDock’s“USBWriteBlocker”portwithaUSBcableand

powertheenclosureon.ThenipthepowerswitchontheForensicLabDocktothe1positiontopower

theForensicLabDockon.

2.3.6 Other Types of Drives

CompatibleSATAandPATAdriveadaptersareavailablethatallowtheForensicLabDocktoaccessto

2.5”PATA/IDE,Hitachi1.8-inch,Toshiba1.8-inch,MacBookAir2010,mSATA,PCIePATA,PCIeSATA,or

PCIeUSBdrives.

a. Connectthedrivetotheadapter.

b. Attachtheincluded4-pinlegacyMolexpowercabletotheadapterandtheotherendtothefrontof

theForensicLabDock.

c. ConnecttheappropriateSATAorIDEcabletothedriveadapterandtheotherendtotheForensic

LabDock.

d. Flipthepowerswitchtothe1positiontopowertheForensicLabDockon.

NOTE

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

3 HOTSWAPPING WITH MAC AND WINDOWS OPERATING SYSTEMS

3.1 MAC OS X

UnmountthevolumebeforepoweringdowntheForensicLabDockbydraggingthevolume’sicontothe

Trash,orbyselectingthevolumethenpressingCommand-E.Oncethevolumehasdisappeared,turnthe

ForensicLabDockoff.IfyouareusingaSASorSATAdevice,CRUrecommendsusingaSASorSATAhost

busadapter(HBA)cardthatsupportshotswapping.Otherwise,MacOSXwillnotsupporthotswapping

withSATAdevices.

IfyouareconnectingaUSBdevicetotheForensicLabDock,swapoutthenewdrive,turntheForensic

LabDockon,andMacOSXwillautomaticallydetectthenewdrive.

3.2 WINDOWS OPERATING SYSTEMS

3.2.1 Hotswapping a SAS or SATA Device

CRUrecommendsusingaSASorSATAhostbusadapter(HBA)cardthatsupportshotswappinginorder

toeasilyejectandremountdrives.

Ifyouhaveahostbusadapter(HBA)cardthatsupportshotswappinginstalled,unmountthevolume

beforepoweringitdownbyleft-clickingontheUSB plug iconwiththegreencheckmarkontheDesktop

taskbarandthenselectingtheproperdevicefromthemenuthatpopsup.Youmayhavetoclickonthe

Show Hidden Icons arrowonthetaskbartondthecorrecticon.Windowswillindicatewhenitissafe

toturntheForensicLabDockoff.ReconnectanewdrivetotheForensicLabDock,turniton,andyour

systemwillautomaticallydetectthenewdrive.

IfyoudonothaveanHBAinstalled,followthesesteps:

a. FortheWindows8productfamily,pressWINKEY + X,thenselectDevice Managerfromthemenu

thatpopsup.

ForWindows7,Vista,andtheWindowsServer2008and2012productfamilies,right-clickonthe

Computer buttonintheStartMenuandselectManage.IntheleftpaneoftheComputerManage-

mentwindowthatopens,left-clickonDevice Manager.

b. ExpandtheDisk drives section.

c. PowerofftheForensicLabDockbyturningthepowerswitchtothe0position.

d. InDeviceManager,clicktheScan for hardware changes buttoninthetoolbar.Notethatthetarget

drivehasdisappearedfromthelistofdrives.

e. ConnectanewdrivetotheForensicLabDockS5.

f. TurnthepowerswitchontheForensicLabDockS5tothe1positiontoturntheuniton.

g. InDeviceManager,clicktheScan for hardware changes buttoninthetoolbaragain.Thenew

volumewillnowappear.

3.2.2 Hotswapping a USB Device

Unmountthevolumebeforepoweringitdownbyleft-clickingontheUSB plug iconwiththegreen

checkmarkontheDesktoptaskbarandthenselectingtheproperdevicefromthemenuthatpops

up.YoumayhavetoclickontheShow Hidden Icons arrowonthetaskbartondthecorrecticon.

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

WindowswillindicatewhenitissafetoturntheForensicLabDockoff.Reconnectanewdrivetothe

ForensicLabDock,turniton,andyoursystemwillautomaticallydetectthenewdrive.

4 UPDATING FIRMWARE

CRUprovidesfreermwareupdatesfortheForensicLabDockthroughourConguratorapplication.

Downloadithere:www.cru-inc.com/support/software-downloads/congurator-software-download/

Ifyourproductisrunningoutdatedrmware,youwillseeapromptaskingyoutoupdateonceyoulaunchthe

Conguratorapplication.Followtheinstructionsontheprompttoupdatethermware.

5 FORENSIC SOFTWARE UTILITY

TheForensicLabDockiscompatiblewithCRU’sForensicSoftwareUtilityapplication.Thissoftwareallowsyou

toperformawrite-blocktestonyourForensicLabDockandmodifyitsHPAandDCOhandlingbehavior.Italso

includestheabilitytodisplaydetailsaboutattachedwrite-blockersanddrivesandallowsyoutosavethatdatato

aleforeasyinclusioninacasereport.

Downloadithere:www.cru-inc.com/support/software-downloads/forensic-software-utility/

ForinformationonHPA/DCOhandling,seeSection2.1.

6 FAQ

6.1 WHAT IS AN HPA AND A DCO?

AHostProtectedArea(HPA)andDeviceCongurationOverlay(DCO)arereservedareasonaharddrivethat

arenotaccessiblebytheBIOSorOS.DatacanbehiddenbehindanHPAorDCO.CRUforensicdevicescan

alertyouifthereisanHPAorDCOsothatyouareawareofitandcantakethenecessarystepstoretrieve

thehiddendata.

6.2 WHY IS IT NECESSARY TO UPDATE THE FIRMWARE OF MY CRU FORENSIC DEVICE?

Firmwarerelatestotheprogramsanddatathatcontrolelectronicproducts.Firmwareisenhancedover

time,usuallytoaddnewfeaturesorincreasecompatibility.Updatingrmwarecanimprovethefunctionality

anddependabilityofyourproduct.IfyourCRUforensicdeviceisusingoutdatedrmware,CRU’sCongu-

ratorapplicationcanrecognizethisandimplementup-to-datermwareonyourdevice.SeeSection4ofthis

manualformoreinformation.

6.3 MY FORENSIC LABDOCK WORKS GREAT WITH SATA DRIVES BUT I AM HAVING

COMPATIBILITY ISSUES WITH IDE/PATA DRIVES. WHAT SHOULD I DO?

First,checktomakesuretheSATAdata/powerconnectorisunpluggedfromtheSATAoutputport.IDE/PATA

drivescannotberecognizedifaSATAconnectionismadewiththeSATAoutput.Next,checktomakesure

the4-pinlegacyMolexpowercableispluggedintotheIDE/PATAdrive.Ifthepowerandhostconnection

aresecurelyattachedtothedrive,thentheIDEcablemaybefaulty.ContactTechnicalSupportforfurther

instructions.

6.4 HOW SHOULD I SET MY IDE/PATA HARD DRIVE JUMPER SETTINGS?

Trythe“Master”congurationonyourharddriverst.Someharddriveshavetwodifferent“Master”

settingsoneforwhenthereisasecondary“slave”drivepresentandoneforwhenthereisnoslavedrive

Protecting Your Digital Assets

Forensic LabDock S5 and U5 User Manual

present.Choosethesettingwithnoslavepresent.Theremaybesomedrivesthatwillnotworkwitheither

ofthesesettings.Thenextchoiceis“CableSelect”.Ifthisdoesnotwork,tryusingnojumpers.Ifyou’re

unsurehowtochangethejumperconguration,checkthemanualthatcame:withyourharddriveorthe

manufacturer’swebsite.Somedrivesalsohavetheinformationprintedonthelabel.

6.5 CONTACTING TECHNICAL SUPPORT

Stillneedhelp?PleasecontactourTechnicalSupportteamthroughwww.cru-inc.com/support.Orcallustoll

freeat(800)260-9800ordirectlyat(360)816-1800.

7 TECHNICAL SPECIFICATIONS

ProductModels ForensicLabDockS5,ForensicLabDockU5

U.S.PatentNo. 8,090,904

InterfaceTypes&Speeds

eSATA:upto6Gbps

IDE/PATA:upto133MB/s

USB(U5Modelonly):upto480Mbps

SAS(S5Modelonly):upto6Gbps

FrontData

Connectors

One(1)eSATAconnector

One(1)IDE/PATAconnector

One(1)USB/SAScomboconnector(onlyUSBisactiveontheU5model;onlySASisac-

tiveontheS5model)

RearData

Connectors

One(1)write-blockedSATAconnector

One(1)write-blockedUSBconnector(U5modelonly)

One(1)SASconnector(S5modelonly)

One(1)USBconnectorforrmwareconguration

HPA/DCOHandling

Fourmodesofoperation(selectableusingtheForensicSoftwareUtilityapplication):

1.LeaveHPAandDCOinplace

2.RemoveHPAtemporarilybutignoreDCO

3.RemoveHPApermanentlybutignoreDCO

4.PermanentlyremoveHPAandDCO

Supported

Operating

Systems

Windows8.1,8,7,andVista

WindowsServer2012,2008,and2003productfamilies

MacOSX10.4.xornewer

Linuxdistributionsthatsupporttheconnectiontypeused

Compliance

EMIStandard:FCCPart15ClassA,CE

EMCStandard:EN55022,EN55024

ProductWeight 1.55lbs(0.703kg)

ProductDimensions 6.81inx5.79inx1.65in(173mmx147mmx42mm)

TechnicalSupport

YourinvestmentinCRUproductsisbackedupbyourfreetechnicalsupportforthelifetime

oftheproduct.Contactusthroughourwebsite,www.cru-inc.com/supportorcallusat

1-800-260-9800or+1-360-816-1800.

Protecting Your Digital Assets

For more information,

visit the CRU web site.

www.cru-inc.com

ThisUserManualcontainsproprietarycontentofCRUAcquisitionGroup,LLC(“CRU”)whichisprotectedbycopyright,trademark,andotherintellectual

propertyrights.

UseofthisUserManualisgovernedbyalicensegrantedexclusivelybyCRU(the“License”).Thus,exceptasotherwiseexpresslypermittedbythat

License,nopartofthisUserManualmaybereproduced(byphotocopyingorotherwise),transmitted,stored(inadatabase,retrievalsystem,orother-

wise),orotherwiseusedthroughanymeanswithoutthepriorexpresswrittenpermissionofCRU.

UseofthefullForensicLabDockv5productissubjecttoallofthetermsandconditionsofthisUserManualandtheabovereferencedLicense.

CRU

,ForensicLabDock™,andRedPort™(collectively,the“Trademarks”)aretrademarksownedbyCRUandareprotectedundertrademarklaw.This

UserManualdoesnotgrantanyuserofthisdocumentanyrighttouseanyoftheTrademarks.

Product Warranty

CRUwarrantsthisproducttobefreeofsignicantdefectsinmaterialandworkmanshipforaperiodoftwoyearsfromtheoriginaldateofpurchase.

CRU’swarrantyisnontransferableandislimitedtotheoriginalpurchaser.

Limitation of Liability

Thewarrantiessetforthinthisagreementreplaceallotherwarranties.CRUexpresslydisclaimsallotherwarranties,includingbutnotlimitedto,the

impliedwarrantiesofmerchantabilityandtnessforaparticularpurposeandnon-infringementofthird-partyrightswithrespecttothedocumentation

andhardware.NoCRUdealer,agent,oremployeeisauthorizedtomakeanymodication,extension,oradditiontothiswarranty.InnoeventwillCRU

oritssuppliersbeliableforanycostsofprocurementofsubstituteproductsorservices,lostprots,lossofinformationordata,computermalfunction,

oranyotherspecial,indirect,consequential,orincidentaldamagesarisinginanywayoutofthesaleof,useof,orinabilitytouseanyCRUproductor

service,evenifCRUhasbeenadvisedofthepossibilityofsuchdamages.InnocaseshallCRU’sliabilityexceedtheactualmoneypaidfortheproducts

atissue.CRUreservestherighttomakemodicationsandadditionstothisproductwithoutnoticeortakingonadditionalliability.

FCC Compliance Statement: “ThisdevicecomplieswithPart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevice

maynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredopera-

tion.”

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare

designedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipment

generates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructionmanual,maycauseharmful

interferencetoradiocommunications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwill

berequiredtocorrecttheinterferenceatthisownexpense.

IntheeventthatyouexperienceRadioFrequencyInterference,youshouldtakethefollowingstepstoresolvetheproblem:

1) Ensurethatthecaseofyourattacheddriveisgrounded.

2) UseadatacablewithRFIreducingferritesoneachend.

3) UseapowersupplywithanRFIreducingferriteapproximately5inchesfromtheDCplug.

4) Reorientorrelocatethereceivingantenna.

PartNumber:A9-000-0047Rev1.4

FOROFFICEORCOMMERCIALUSE

1000SETechCenterDrive,Suite160,Vancouver,WA98683