Mocka Adele Chair Assembly Instructions

A B

C D E F

Phillips screwdriver required

Hardware Supplied

screw

spring

washer x4

allen

key x1

flat

washer x4

wedge

screw

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

G H I

seat

leg

Adele Chair

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Attach the legs (H) and (I) to the seat (G) using 4x screws (B), 4x spring

washers (C) and 4x flat washers (D). Tighten with the allen key (A).

Attach 2x wedges (E) between the legs as shown and secure with 8x

screws (F). Tighten with a screwdriver. Carefully turn the chair over onto

its legs, ensuring it is balanced and steady before use. You’re done,

enjoy!

Adele Chair

mocka.co.nz | mocka.com.au

Assembly Instructions

Please note that there are no pilot holes on the legs, but wedges

are to sit flush as shown. Just put the screw in and start turning

and it will find where it needs to go, or use a drill if you have one

handy.