GB WAK 9460 SILENCE PROGRAMME CHART
5019 401 05319
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
M0501
- tested and approved by The Woolmark Company -
Programme
Care
Labels
Tempe-
rature
°C
Max.
load
Kg
Type of wash/
Degree of soiling
- For temperature selection, respect the manufacturer's
recommendations on the care label
Detergent and Additives Selectable Special Options =
❉
Max.
Spin
speed
rpm
Notes
Pre-
wash
Main
wash
Softener
Start
Delay
Eco +
Pre-
wash
Intensive
Rinse
Rinse
hold
Speed
reduction
Inicio
diferido
Eco + Prelava.
Aclarado/enx.
Intensivo
Paro cuba
llena/cheia
Centrif.
Cotton White / Hygiene +
Algod.
50-95 6.0
Normally soiled bed linen, table linen and underwear, towels etc. made
of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria,
ensuring sanitization of your laundry. The bacteria removal efficiency has
been tested following a similar methodology to the NF EN 13697 standard
of Nov. 2001.
❉
Yes
❉❉❉❉ ❉ ❉ ❉
1400
“Prewash” can be additionally selected for heavily
soiled laundry.
For temperature selection, please respect the
manufacturer's recommendation on the care label.
20-40 5.0
Cotton Colours
Color / Cor
50-60 6.0
Slightly to normally soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
❉
Yes
❉❉❉❉ ❉ ❉ ❉
1400
“Prewash” can be additionally selected for heavily
soiled laundry.
20-40 5.0
Synthetics
Sintéticos
20-60 2.5
Normally soiled blouses, shirts and other outer clothing made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of
these fibres with cotton.
❉
Yes
❉❉❉❉ ❉ ❉ ❉
1)
1000
1)
“Prewash” can be additionally selected for heavily
soiled laundry.
Daily Load
Mix.
20-60 3.0
Slightly to normally soiled textiles made of cotton and/or synthetic
fibres.
–
Yes
❉❉
––
❉❉❉
1400
In this programme the spin speed should be adapted
to the fabrics.
Quick Wash
Rápido
20-30 3.0
Hardly worn outer and sports clothing made of cotton, polyester,
polyamid and mixed cotton fabrics.
–
Yes
❉❉
––
–
❉❉
1400
–
Delicate
Delicados
20-40 1.5
Curtains and delicate dresses, skirts, shirts and blouses.
❉
Yes
❉❉
–
❉
–
❉❉
1)
1000
1)
“Prewash” can be additionally selected for heavily
soiled laundry.
Wool
Lana / Lã
20-40 1.0
Only woollens with a felt-free finish, labelled with the woolmark and
identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark
Company for machine washable wool.
–
Yes
❉❉
––
–
❉❉
1)
1000
1)
If you select “Rinse Hold” do not leave items to soak
for too long.
Dessous / Handwash
Lingerie/A mano/mão
20-40 1.0
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark
Company for handwashable wool.
This cycle is particularly suitable to treat delicate lingerie (use of a
laundry net strongly recommended).
–
Yes
❉❉
––
–
❉❉
2)
400
2)
If you select “Rinse Hold” do not leave items to soak
for too long. A very gentle spin is used in this
programme.
Easy Ironing
Fácil
20-60 3.0
Normally soiled blouses, shirts and other outer clothing made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of
these fibres with cotton.
❉
Yes
❉❉❉❉ ❉ ❉ ❉
1)
1000
1)
To lessen creasing, the water quantity is increased
and the clothes are spun very gently in this
programme.
Long Spin
Centrif. Intensivo
––
6.0
––––
❉
–– – –
❉
1400
In this programme spinning is intensive. Same as the
spin cycle in the “Cotton” programme.
Rinse & Spin
Enjuague/enx & Centrif.
–
20 6.0
–––
❉❉
––
❉
❉❉
1400
Same as rinsing and spinning in the cotton
programmes.
Rinse & Gentle Spin
Enjuague/enx & Centrif. suave
–
20 1.5
–––
❉❉
–– –
❉❉
1)
1000
1)
Same as rinsing and spinning in the “Wool”
programme.
Drain
Desagüe/drenag.
––– – –––
❉
–– – – – –
This programme only drains (alternative method of
terminating the programme after “Rinse Hold”
without spinning). In addition all running
programmes can be cancelled with this programme.
The
Dynamic
Intelligence
technology always guarantees perfect results with maximum efficiency
whatever the wash load.
B
G
J
D
A
E
{
H I
C
This washing machine is equipped
with
automatic safety functions
which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
A. “Pump” indicator
B. “Water tap closed” indicator
Check your washing machine’s water
supply.
C. “Aquastop” indicator
D. “Door locked” indicator
E. “Start” button
F. “Start delay” button with time display
G. Programme sequence indicator
H. “Spin Speed Reduction” button
I. Reset button
J. Selectable programmes
K. Temperature selection button
F K
40105319GB.fm Page 1 Thursday, May 18, 2006 10:45 AM
Black process 45.0° 150.0 LPI
5019 401 05319
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
1. Turn the
programme selector knob
to the
desired programme.
2. The
remaining time display
shows the duration
of the chosen programme (in hours and minutes),
and the lamp over the
“Start”
button flashes.
3. The
programme sequence indicator
and the
predefined spin speed indication corresponding
to the selected programme lights up.
The recommended temperature (see the indicator)
can be altered by pressing the temperature
selection button under the temperature display.
• Wash your laundry in the desired programme
(Cotton, Synthetics), adding an appropriate
amount of chlorine bleach to the SOFTENER
chamber (close the detergent dispenser carefully).
• Immediately after end of programme, start the “Rinse
and Spin” programme to eliminate any residual bleach
smell; if you want, you can add softener.
“Eco +” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
“Prewash” button
• Only for heavily soiled laundry (e.g. sand or
granular dirt). Programme duration is increased
by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without being spun: discoloration of the laundry
and additional creasing are prevented.
• This option is particularly recommended for the
programme “Synthetic” or “Delicate”.
• This function is particularly useful if you want to
postpone spinning to a later time.
Note:
The programme has reached the “Rinse
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the
“Start”
button again.
“Spin Speed Reduction” button
• A maximum spin speed is assigned to each programme.
• Press the button to set another speed for the
spin cycle.
• If no light goes on, the final spin is cancelled.
The water is only drained out.
CONSUMPTION DATA
*
Programme Temperature
(°C)
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration
approx.**
(hours : minutes)
Cotton White
95 6.0 49
***
1.90 2:00
Cotton Colours
60 6.0 44 1.14 2:20
Cotton with “Eco +” ****
60 6.0 44 1.02 2:30
Cotton Colours
40 5.0 42 0.70 2:05
Synthetics
60 2.5 60
***
0.90 1:45
Synthetics
40 2.5 55 0.60 1:30
Daily Load
40 3.0 48 0.55 1:00
Quick Wash
30 3.0 37 0.30 0:30
Delicate
30 1.5 60 0.50 0:45
Wool
40 1.0 60 0.50 0:40
Dessous / Handwash
30 1.0 45 0.40 0:35
Easy Ironing
40 3.0 60 0.60 1:30
*
The
consumption values
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
**
The
programme duration
may also vary from the chart values. The washing machine is able to allow for particular
household conditions and to adapt the programme run time accordingly.
***
To reduce the
water temperature
, some cold water is added at the end of the main wash cycle, before the pump
drains the water out.
****
Reference programme for energy label.
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
USING CHLORINE BLEACH
SELECT SPECIAL OPTIONS -
The corresponding lights go on (if not
selectable: rapid flashing for 3 seconds)
With the “Start Delay” function the appliance can be run
cheaply e.g. at night, when the electricity is cheaper.
• Press the “Start Delay” button. Select the
programme start from 1 to 24 hours ahead by
pressing the button again.
• Press the
“Start”
button.
The Start Delay indicator light flashes until the
programme starts.
“Start Delay” correction.
• Before “Start” has been pressed:
The preset number of hours can be altered by
continuously pressing the “Start Delay” button.
By pressing the Start Delay button again after the
“24” setting, the time delay can be deleted again
or set again.
After “Start” has been pressed:
The preset number of hours can be reduced by
pressing the “Start Delay” button again; please
note, however, that the washing programme
starts IMMEDIATELY, as soon as you operate it
again with the Start Delay switch 01 setting.
To increase the number of hours preselected, first
turn the programme selector switch to the “Off”
position. Then set the programme and the additional
options again and select the desired number of hours.
After you have selected the programme and eventually
the additional options, the indicator light over the
“Start”
button flashes. Turn on the tap and start the
programme by pressing the
“Start”
button. Now the
indicator light over the button goes on.
In addition, all programme phases are indicated by the
associated lights. After the end of a programme phase,
the associated indicator light goes out. Thus the
programme sequence indicator moves from left to
right across the wash, rinse and spin phases. At the end
of the programme, only the “End” indicator is still on.
As long as a washing programme is running, the lamp
lights up to show that the door cannot be opened.
When the lamp goes off, the door can be opened again.
If
“Start”
has been pressed, but the door is not latched,
the “Door Locked” indicator flashes for 10 seconds.
The door must be pushed shut within this time.
After the 10 seconds, the “Door Locked” indicator
goes out and the
“Start”
button flashes. The door
must then be opened and closed again and the
“Start”
button must be pressed.
“Pump”
Waste water is not pumped out. Check wether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide" in the
Instructions for Use.
“Aquastop“
Lighting up of the Aquastop indication can be caused
by a leak in the appliance or hose. Please refer to the
“Troubleshooting Guide" in the Instructions for Use.
• The “End” indicator goes on.
1. Switch the washing machine off by turning the
programme selector to the “
O
”-position.
2. Turn off the tap.
3. Open the door and unload the machine.
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the
“Start”
button to interrupt the
programme. The light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the
“Start”
button again to restart the
programme.
• If you are in the “Prewash” programme step, this
additional option cannot be deselected as
described (to do this see “Cancel/Reset a
running programme before the end”).
Press the
“Reset”
button for at least 2 seconds.
Any existing water is drained out before the door
can be opened.
START DELAY
PROGRAMME START
“DOOR LOCKED” INDICATOR
“TROUBLE” INDICATORS
PROGRAMME END
RESELECT AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105319GB.fm Page 2 Thursday, May 18, 2006 10:45 AM
Black process 45.0° 150.0 LPI
/