Bauknecht EXCELLENCE 1400 Program Chart

Brand: Bauknecht

Model: EXCELLENCE 1400

Category: Washing machines

Type: Program Chart

Bauknecht EXCELLENCE 1400 is a washing machine with automatic safety functions that detect and diagnose faults at an early stage and react appropriately. It has a wide range of programmes to choose from, depending on the type of fabric and the degree of soiling. You can also select additional special options, such as "Eco +", "Prewash", "Intensive Rinse", "Rinse Hold", and "Spin Speed Reduction". The "Start Delay" function allows you to delay the start of the programme by 1 to 24 hours, so you can take advantage of cheaper electricity rates or run the appliance at a more convenient time.

GB EXCELLENCE 1400 PROGRAMME CHART

5019 401 05267

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

M0501

- tested and approved by The Woolmark Company -

Programme

Care

Labels

Type of wash/

Degree of soiling

Max.

load

Detergent and Additives Selectable Special Options =

❉

Te mp e-

rature

Max.

Spin

speed

Notes

Softener Main

wash

Pre-

wash

Start

Delay

Eco +

Pre-

wash

Intensive

Rinse

hold

Speed

reduction

Start

selectie

Eco+

Voor-

was

Intensief

Spoelen

Spoel-

stop

Centrif.

°C rpm

CottonWhite/Hygiene+

Kookwas / Hygienic+

Normally soiled bed linen, table linen and underwear, towels etc. made

of cotton and linen.

At a temperature of 80°C or more, this programme eliminates bacteria,

ensuring sanitization of your laundry. The bacteria removal efficiency

has been tested following a similar methodology to the NF EN 13697

standard of Nov. 2001.

6.0

❉

Ye s

❉❉❉❉ ❉❉ ❉

20-95 1400

“Prewash” can be additionally selected for

heavily soiled laundry.

For temperature selection, please respect the

manufacturer’s recommendation on the care

label.

Cotton Colours

Bontewas

Slightly to normally soiled bed linen, table linen and underwear, towels,

shirts etc. made of cotton and linen.

6.0

❉

Ye s

❉❉❉❉ ❉❉ ❉

20-60 1400

“Prewash” can be additionally selected for

heavily soiled laundry.

Synthetics

Synthetisch

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of

these fibres with cotton.

2.5

❉

Ye s

❉❉❉❉ ❉❉❉

20-60 1000

“Prewash” can be additionally selected for

heavily soiled laundry.

Daily Load

Gemengde was

Slightly to normally soiled textiles made of cotton and/or synthetic

fibres.

3.0

❉

Ye s

–

❉

––

❉❉❉

20-60 1400

In this programme the spin speed should be

adapted to the fabrics.

Quick Wash

Snelwas

Hardly worn outer and sports clothing made of cotton, polyester,

polyamid and mixed cotton fabrics.

3.0

❉

Ye s

–

❉

––

❉❉

20-30 1400

–

Delicate

Fijne was

Curtains and delicate dresses, skirts, shirts and blouses.

1.5

❉

Ye s

❉❉

–

❉

❉❉

20-40 1000

“Prewash” can be additionally selected for

heavily soiled laundry.

Wool

Wol

Only woollens with a felt-free finish, labelled with the woolmark and

identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark

Company for machine washable wool.

1.0

❉

Ye s

–

❉

––

❉❉

20-40 1000

If you select “Rinse Hold” do not leave items to

soak for too long.

Dessous / Handwash

Lingerie / Handwas

Textiles made of linen, silk, wool or viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark

Company for handwashable wool.

This cycle is particularly suitable to treat delicate lingerie (use of a

laundry net strongly recommended).

1.0

❉

Ye s

–

❉

––

❉❉

20-40 400

If you select “Rinse Hold” do not leave items to

soak for too long. A very gentle spin is used in

this programme.

Easy Ironing

Makkelijk strijken

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of

these fibres with cotton.

3.0

❉

Ye s

❉❉❉❉ ❉❉❉

40 1000

To lessen creasing, the water quantity is

increased and the clothes are spun very gently in

this programme.

Spin

Centrifugeren

––

6.0

–––

❉

–– ––

❉

–

1400

In this programme spinning is intensive. Same as

the spin cycle in the “Cotton” programme.

Rinse & Gentle Spin

Spoelen & kort centrif.

––

6.0

❉

––

❉

–– –

❉❉

20 1400

Same as rinsing and spinning in the cotton

programmes.

Rinse & Spin

Spoelen & centrifugeren

––

1.5

❉

––

❉

––

❉❉❉

20 1000

Same as rinsing and spinning in the “Wool”

programme.

Drain

Afpompen

––––––

❉

–– –– – ––

This programme only drains (alternative method of

terminating the programme after “Rinse Hold”

without spinning). In addition all running

programmes can be cancelled with this programme.

The

Dynamic

Intelligence

technology always guarantees perfect results with maximum efficiency

whatever the wash load.

{

H I

This washing machine is equipped

with

automatic safety functions

which detect

and diagnose faults at an early stage and react

appropriately, e.g.:

A. “Pump” indicator

B. “Water tap closed” indicator

Check your washing machine’s water

supply.

C. “Aquastop” indicator

D. “Door locked” indicator

E. “Start” button

F. “Start delay” button with time display

G. Programme sequence indicator

H. “Spin Speed Reduction” button

I. Reset button

J. Selectable programmes

K. Temperature selection button

F K

40105267GB.fm Page 1 Wednesday, October 26, 2005 12:19 PM

Black process 45.0° 100.0 LPI

5019 401 05267

Add the detergent as described in the chapter “Detergent

and Additives” in the instructions for use.

1. Turn the

programme selector knob

to the desired

programme.

2. The

remaining time display

shows the duration of

the chosen programme (in hours and minutes), and the

lamp over the

“Start”

button flashes.

3. The

programme sequence indicator

and the

predefined spin speed indication corresponding to the

selected programme lights up.

The recommended temperature (see the indicator)

can be altered by pressing the temperature selection

button under the temperature display.

•Wash your laundry in the desired programme (Cotton,

Synthetics), adding an appropriate amount of chlorine

bleach to the SOFTENER chamber (close the

detergent dispenser carefully).

• Immediately after end of programme, start the “Rinse

and Spin” programme to eliminate any residual bleach

smell; if you want, you can add softener.

“Eco +” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption can be achieved.

“Prewash” button

• Only for heavily soiled laundry (e.g. sand or granular

dirt). Programme duration is increased by some

15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with

detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without

being spun: discoloration of the laundry and additional

creasing are prevented.

• This option is particularly recommended for the

programme “Synthetic” or “Delicate”.

• This function is particularly useful if you want to

postpone spinning to a later time.

Note:

The programme has reached the “Rinse Hold”

when the corresponding light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme

will terminate automatically with the appropriate spin

cycle for the current programme.

CONSUMPTION DATA

Programme Temperature

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme duration

approx.**

(hours : minutes)

Cotton White/Hygiene+

95 6.0 49

***

1.90 2:00

Cotton Colours

60 6.0 44 1.14 2:20

Cotton with “Eco +” ****

60 6.0 44 1.02 2:30

Cotton Colours

40 5.0 42 0.70 2:05

Synthetics

60 2.5 60

***

0.90 1:45

Synthetics

40 2.5 55 0.60 1:30

Daily Load

40 3.0 48 0.55 1:00

Quick Wash

30 3.0 37 0.30 0:30

Delicate

30 1.5 60 0.50 0:45

Wool

40 1.0 60 0.50 0:40

Dessous / Handwash

30 1.0 45 0.40 0:35

Easy Ironing

40 3.0 60 0.60 1:30

The

consumption values

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

The

programme duration

may also vary from the chart values. The washing machine is able to allow for particular

household conditions and to adapt the programme run time accordingly.

***

To reduce the

water temperature

, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

****

Reference programme for energy label.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

USING CHLORINE BLEACH

SELECT SPECIAL OPTIONS -

The corresponding lights go on (if not

selectable: rapid flashing for 3 seconds)

• If you do not wish to spin the clothes, turn the

programme selector knob to “Drain” and press the

“Start”

button again.

“Spin Speed Reduction” button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the spin

cycle.

• If no light goes on, the final spin is cancelled.

The water is only drained out.

With the “Start Delay” function the appliance can be run

cheaply e.g. at night, when the electricity is cheaper.

• Press the “Start Delay” button. Select the programme

start from 1 to 24 hours ahead by pressing the button

again.

• Press the

“Start”

button.

The Start Delay indicator light flashes until the

programme starts.

“Start Delay” correction.

• Before “Start” has been pressed:

The preset number of hours can be altered by

continuously pressing the “Start Delay” button.

By pressing the Start Delay button again after the “24”

setting, the time delay can be deleted again or set

again.

After “Start” has been pressed:

The preset number of hours can be reduced by

pressing the “Start Delay” button again; please note,

however, that the washing programme starts

IMMEDIATELY, as soon as you operate it again with

the Start Delay switch 01 setting.

To increase the number of hours preselected, first turn

the programme selector switch to the “Off” position.

Then set the programme and the additional options

again and select the desired number of hours.

After you have selected the programme and eventually the

additional options, the indicator light over the

“Start”

button flashes. Turn on the tap and start the programme

by pressing the

“Start”

button. Now the indicator light

over the button goes on.

In addition, all programme phases are indicated by the

associated lights. After the end of a programme phase, the

associated indicator light goes out. Thus the programme

sequence indicator moves from left to right across the

wash, rinse and spin phases. At the end of the programme,

only the “End” indicator is still on.

As long as a washing programme is running, the lamp lights

up to show that the door cannot be opened. When the

lamp goes off, the door can be opened again.

“Start”

has been pressed, but the door is not latched,

the “Door Locked” indicator flashes for 10 seconds. The

door must be pushed shut within this time.

After the 10 seconds, the “Door Locked” indicator goes

out and the

“Start”

button flashes. The door must then

be opened and closed again and the

“Start”

button must

be pressed.

“Pump”

Waste water is not pumped out. Check wether the drain

hose is kinked or the filter must be cleaned; in the latter

case refer to the Instructions for Use (“Removing the

Filter”).

“Water Tap”

The appliance has no or insufficient water supply. Open

the water tap; if the indication still lights up, refer to the

“Troubleshooting Guide” in the Instructions for Use.

“Aquastop”

Lighting up of the Aquastop indication can be caused by a

leak in the appliance or hose. Please refer to the

“Troubleshooting Guide” in the Instructions for Use.

• The “End” indicator goes on.

1. Switch the washing machine off by turning the

programme selector to the “

”-position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue in the same

programme section during which the current programme

was interrupted. Therefore do not add any more

detergent.

1. Press the

“Start”

button to interrupt the programme.

The light flashes.

2. Select the new programme (with temperature), any

additional options and - if you wish - another spin

speed.

3. Press the

“Start”

button again to restart the

programme.

• If you are in the “Prewash” programme step, this

additional option cannot be deselected as described

(to do this see “Cancel/Reset a running programme

before the end”).

Press the

“Reset”

button for at least 2 seconds. Any

existing water is drained out before the door can be

opened.

START DELAY

PROGRAMME START

“DOOR LOCKED” INDICATOR

“TROUBLE” INDICATORS

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105267GB.fm Page 2 Wednesday, October 26, 2005 12:19 PM

Black process 45.0° 100.0 LPI

Bauknecht EXCELLENCE 1400 Program Chart

Brand: Bauknecht

Model: EXCELLENCE 1400

Category: Washing machines

Type: Program Chart

Download PDF

report

Bauknecht EXCELLENCE 1400 Program Chart

Bauknecht EXCELLENCE 1400 Program Chart

Related papers

Other documents