2. Premier Mounts
  3. PCC-1-1-2

Premier Mounts PCC-1-1-2 User guide

  • I have reviewed the provided Installation Guide document for the PCC-1-1-2 Mounting Clamp. This document details the steps for properly installing the clamp on a truss tube and securing a 1 1/2" pipe, including the use of a coupler assembly and safety screw. I am ready to answer any questions you may have regarding the installation process or the features described in this guide.
  • What size truss tubes can this clamp be mounted on?
    How is the clamp secured to the truss?
    How is the pipe attached to the coupler assembly?
Installation Guide
Instructions
1) Loosen the cheeseborough clamp nut to fully open position.
2) Place the upper clamp body over the 1 1/2” or 2” ceiling truss tube and place the
1/2” clamp nut to secure the clamp assembly to the truss.
3) Once you have the PCC-1-1-2 at the desired position on the truss tube firmly
tighten the 1/2” clamp nut to secure the clamp assembly to the truss.
4) Thread the mating 1 1/2” Pipe fully into the coupler assembly.
5) Secure the pipe to the coupler assembly by installing the safety screw.
6) Recheck all mating points for security of install.
Safety Screw
Coupler Assembly
1 1/2” Pipe
Upper Clamp
Truss Tube
PCC-1-1-2
9533-011-111-0X_2
premiermounts.com | p. 800.368.9700 | e. [email protected]
500 W Central Ave, Suite A, Brea, CA 92821 USA
/