Premier Mounts FPS-200 User guide

Premier Mounts
Brand
Premier Mounts
Model
FPS-200
Type
User guide

Premier Mounts FPS-200 is motorized articulating TV mount designed to lift flat-panel displays up and down with a smooth, quiet operation. It is best suited for commercial applications such as conference rooms, classrooms, or training facilities. The FPS-200 has a weight capacity of 129 pounds and can accommodate displays ranging in size from 55" to 86". The mount also features a built-in cable management system to keep cords organized and out of sight.

Here are some of the key features and capabilities of the Premier Mounts FPS-200:

  • Motorized lift operation for smooth and quiet height adjustment

Premier Mounts FPS-200 is motorized articulating TV mount designed to lift flat-panel displays up and down with a smooth, quiet operation. It is best suited for commercial applications such as conference rooms, classrooms, or training facilities. The FPS-200 has a weight capacity of 129 pounds and can accommodate displays ranging in size from 55" to 86". The mount also features a built-in cable management system to keep cords organized and out of sight.

Here are some of the key features and capabilities of the Premier Mounts FPS-200:

  • Motorized lift operation for smooth and quiet height adjustment
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
FPS-200
premiermounts.com | p. 800.368.9700 | e. [email protected]
500 W Central Ave, Suite A, Brea, CA 92821 USA
1
Important Note: Please take the time to completely read
the installation manual and confirm your understanding of
all steps for the proper installation of the FPS-200 power lift
system. Remove all items from the carton and confirm that
you have the complete kit. Should you have any missing
items, please call (800) 368-9700, or internationally at (714)
632-7100 and ask for customer service.
Step 1: Determine where the desired “centered” height of the
display will be, and make a small pencil mark on the wall to
indicate. With a minimum of two people, raise the FPS-200
to the wall and mark the center of travel point between the
two chrome tubes with your pencil. Measure from the center
point of the tubes to the top of the wall mount’s slotted
mounting points and notate the distance.
M8 x 16mm M4 x 5mm5/16”M5 x 10mm 5/16” x 3”
x8 x2
x1
x4 x4 x2
x1 x2
x1 x1 x2x5
x6
1/8” / 3.25mm
(Wood Only)
7/16”
Required for installation
Included components
premiermounts.com | p. 800.368.9700 | e. [email protected]
3
2
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
FPS-200
Step 3: With a minimum of two people raise the FPS-200
and secure it to the wall with the 5/16” x 3” lag bolts and flat
washers. Note: If you plan to toggle the bolts to steel studs
in either the top or bottom mounting points, the 1/4” pilot
hole will have to be drilled out with a 5/16” drill to allow for
the wedge anchors to be a minimum depth of 3” (75mm).
Step 2: With a stud finder, locate the 16” or 24” mark on the
center studs inside the wall closest to the desired mounting
point and center the mount left to right, then top to bottom.
With your pencil, mark the upper and lower left and right
mounting points through the mounting plate. Set the FPS-
200 aside and drill the four pilot holes.
x4 x4
premiermounts.com | p. 800.368.9700 | e. [email protected]
4
5
Step 4: With the base FPS-200 securely mounted to the
wall, the two A/C power outlet boxes can now be mounted to
the FPS-200 frame.
Note: The upper power box needs to have the two outlets
“hard wired” to them.
Step 5: Confirm that all power and signal cables are properly
strapped to the FPS-200 frame to allow free movement of
the cables during the complete up and down travel of the
powered mount.
x2
x1 x2
premiermounts.com | p. 800.368.9700 | e. [email protected]
6
7
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
FPS-200
Step 6: With the system now powered and level, re-attach
the upper and lower covers with the supplied hardware that
you removed.
Step 7: Install the “P” series flat mount with the supplied
hardware, following the installation instructions supplied
with the “P” series flat wall mount. Make sure you center the
mount to conform with the original center travel height that
you previously marked on the wall.
x4x2
premiermounts.com | p. 800.368.9700 | e. [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Premier Mounts FPS-200 User guide

Premier Mounts
Brand
Premier Mounts
Model
FPS-200
Type
User guide

Premier Mounts FPS-200 is motorized articulating TV mount designed to lift flat-panel displays up and down with a smooth, quiet operation. It is best suited for commercial applications such as conference rooms, classrooms, or training facilities. The FPS-200 has a weight capacity of 129 pounds and can accommodate displays ranging in size from 55" to 86". The mount also features a built-in cable management system to keep cords organized and out of sight.

Here are some of the key features and capabilities of the Premier Mounts FPS-200:

  • Motorized lift operation for smooth and quiet height adjustment
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents