Premier Mounts PCC-1-1-2 User guide

Installation Guide

Instructions

1) Loosen the cheeseborough clamp nut to fully open position.

2) Place the upper clamp body over the 1 1/2” or 2” ceiling truss tube and place the

1/2” clamp nut to secure the clamp assembly to the truss.

3) Once you have the PCC-1-1-2 at the desired position on the truss tube firmly

tighten the 1/2” clamp nut to secure the clamp assembly to the truss.

4) Thread the mating 1 1/2” Pipe fully into the coupler assembly.

5) Secure the pipe to the coupler assembly by installing the safety screw.

6) Recheck all mating points for security of install.

Safety Screw

Coupler Assembly

1 1/2” Pipe

Upper Clamp

Truss Tube

PCC-1-1-2

9533-011-111-0X_2

premiermounts.com | p. 800.368.9700 | e. [email protected]

500 W Central Ave, Suite A, Brea, CA 92821 USA