2. Lovibond
  3. Single Method SD 70 - Conductivity

Lovibond Single Method SD 70 - Conductivity User manual

  • Hello! I've reviewed the Method Reference Book for the SD 70 Conductivity Meter. This document outlines the procedures for using the device to measure conductivity, specifically for cooling water applications. The manual includes instructions on how to take a measurement, and emphasizes the importance of rinsing the electrode. I am ready to answer your questions pertaining to the operation and features described in this reference book.
  • What is the measurement range of the Conductivity Meter?
    What type of water is this device suitable for?
    Where can I find information about calibration?
Conductivity / SD 70
ENMethod Reference Book1.02
Conductivity SD 70
0 - 20 mS/cm
Application List
• Cooling Water
Notes
1. The description of the calibration and the device settings are described in the detailed
operating instructions. Detailed operating instructions are enclosed with the device.
Conductivity / SD 70
ENMethod Reference Book1.0 3
Conductivity / SD 70
ENMethod Reference Book1.04
°C µS
Rinse the electrode with
distilled or deionised water
and carefully wipe with a
paper towel.
Hold the tester without
protective cap in the
sample water to be
measured so that the elec-
trode and temperature
probe is immersed in the
sample water not deeper
than the seal ring.
The measurement result is
displayed.
/