2. ROOMS TO GO
  3. 90221575

ROOMS TO GO 90221575, 90221587 Assembly Instructions

  • Hello! I have reviewed the provided assembly instructions for the ADESSO Rodeo Floor Lamp 3349-26. This document outlines the step-by-step process of assembling the lamp, which includes screwing the poles together and attaching the lamp shade. I am ready to answer any questions you might have about the assembly process or the lamp's features such as its polarized plug or bulb requirements.
  • What type of bulb should I use?
    Is this lamp suitable for wet locations?
    What if the plug doesn't fit into the outlet?
21 Penn Plaza Suite 909 New York, NY 10001
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
Assembly Instructions (English)
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
ASSEMBLY INSTRUCTIONS FOR
RODEO FLOOR LAMP
Model # 3349-26
1.03349-26
1. Remove all parts and lay on a flat surface.
2.Screw pole ( B ) clockwise into base ( A ) to tighten.
3.Screw pole ( C ) clockwise into pole ( B ) to tighten.
4.Screw pole ( D ) clockwise into pole ( C ) to tighten.
5.Screw parts ( E ) clockwise into plole (D ) to tighten
and get the remaining slack of the power cord out
carefully from the point ( I ).
6.Set fabric shade ( G ) on lamp holder ( F ) and tighten
colock wise socket ring ( H ) to secure shade.
BULB TYPE: (1) 150 watt 3-way incandescent or
42 watt CFL equivalant
(not included)
/