ROOMS TO GO 90234344 Assembly Instructions

ASSEMBLY INSTRUCTIONS FOR

Ashton Tall Floor Lamp

Model # 3439-01

1.03439-01

Remove all parts and lay on a ﬂat surface.

1.Screw pole(B) clockwise into pole(A) to tighten.

2.Screw pole(C) clockwise into pole(B) to tighten.

3.Screw pole(D) clockwise into pole(C) to tighten.

Screw base (E) clockwise onto pole (D) to tighten.

Then get the remaining slack of the power cord

out carefully from point(F) .

5.Set shade(G) on the lamp socket and tighten

clockwise with socket ring(H) to secure shade. Then

screw bulb(D) clockwise into socket(M) to tighten.

6.Set shade(J) on the lamp socket and tighten

clockwise with socket ring(K) to secure shade. Then

screw bulb(L) clockwise into socket(N) to tighten.

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug (one

blade is wider than the other) as a feature to

reduce the risk of electric shock. This plug will ﬁt

in a polarized outlet only one way. If the plug does

not ﬁt fully in the outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed electrician. Never

use with an extension cord unless plug can be

fully inserted. DO NOT ALTER THE PLUG.

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

BULB TYPE: (1) 2pcs 40 watt type A vintage bulb

included.

Tel: (212) 736 4440 Fax: (212) 736 4806

www.adessohome.com

Assembly Instructions (English) 353 West 39th Street, 2nd Floor, New York, NY 10018