Adesso 8022-12 Installation guide

8022-22 1.0

Assembly Instructions (English)

Tel: (212) 736 4440 Fax: (212) 736 4806

www.adessohome.com

ASSEMBLY INSTRUCTION FOR

Dune Floor Lamp

Dune Floor LampDune Floor Lamp

Dune Floor Lamp

Model# 8022-22

21 Penn Plaza Suite 909 New York,NY 10001

1. Screw the pole (B) onto base (A) clockwise until tight, and

screw poles (B), (C), and (D) together. You may need to pull

any excess cord gently through the poles so that these two

parts fit.

2. Screw in light bulbs before applying shade(E).

3. Unscrew pre-assembled finial ( F ) from upper lamp pole

(D).

4. Put shade (E) onto the upper lamp pole（D), screw on

finial (F) until tight.

5. Tighten the metal buckle (H) onto pole(C) with screw (G).

Use metal metal buckle (H) to secure the shade (F) to the

pole.

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

---------------------------------------------------------------

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug as a feature to reduce

the risk of electric shock (one blade is larger than the other).

This plug will fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician.Do not use with an

extension cord unless the plug can be fully inserted. DO

NOT ALTER THE PLUG .

-------------------------------------------------------

BULB TYPE: Use only with maximum of 3*60 watt

incandescent bulbs (bulbs not included).

PARTS DIAGRAM

(1) * finial (F) 1* metal buckle (H)