2. ASA Electronics
  3. VOS7M140IWP

ASA Electronics VOS7M140IWP Operating instructions

  • I have reviewed the Work Instruction document for VOS7M140IWP, which details the steps for assembling parts, including pulling, packing, labeling, and trimming. I'm ready to assist you with any questions you have about these instructions.
  • What is the first step?
    What should be done after placing parts in the box?
    What is the last step?
Date: 8/17/2023
Written By
Doc. Revision: A R. Priddy
Revision Date: Approved By
ASA Model #: VOS7M140IWP Joe Caban
3. Put label on the outside of the box.
4. Add packing bubbles and trim box down if necessary
Work Instruction: VOS7M140IWP
1. Pull parts per JDE work order
2. Place parts in the box
8/17/2023 1
/