Rail Kit Quick Installa�on Guide
Click! Outer Rail
Inner Rail
White
1
2
3
1
2
3
Front Bracket
Front Bracket
Rear Bracket
Detach FrontBracket From Rack Post DetachRear Bracket From Rack Post
Click!
Click!
Qvmm
Rear Bracket
Pull
Qvmm
Pull
M5x10+Washer
12
3
4
5
Key Hole
M4X4 Flat head screw
1
2
3
Click!
1
2
3
4
5
Remove the chassisfromrack
Pull
White
A) Remove the Inner Rail B) Push and Slide Middle Rail back
C) Install the Inner Rail (op�onal suppor�ng bracket) onto the chassis
D) Fix the Outer Rail/Bracket assembly to the frame
E) Insert the Chassis
1. Pull the middle rail fully extended in lock posi�on.
2. Ensure ball bearing retainer is located at the front of the middle rail.
3. Insert the chassis into middle-outer rails.
4. When hit a stop, please pull/push the blue release tab on the inner rails.
5 Push the chassis back to the rack and fasten M5x9 screw to chassis ear.
-
1
