B2006
Jockey Wheel Mast
Installation and user guide
Safety instructions
> Always follow manufacturer’s operating and
safety instructions when using tools and/or
equipment
> Always remove your aerial, mast and clamp
before travelling
> Maxview shall not be liable for any damages or
injury resulting from improper usage or
installation
Guidelines for the best reception
> Choose the site position where the aerial can be
mounted as high as possible with a clear line of
sight pointing in the direction of the transmitter
with no obstructions e.g trees, buildings blocking
view.
> TV reception may improve with height and the
fewer obstructions between the aerial and the
transmitter the better.
Installation example
Turn over for bracket and mast assembly.
UK Contact:
Helpline: +44 (0)1553 811000
Email: suppor[email protected]o.uk
Web: www.maxview.co.uk
Rate and Like us on Facebook:
Search: ‘Maxviewlimited’ today.
Maxview reserve the right to change specifications without prior notice
9111253 Iss 2
B2006
Jockey Wheel Mast
Installation and user guide
Safety instructions
> Always follow manufacturer’s operating and
safety instructions when using tools and/or
equipment
> Always remove your aerial, mast and clamp
before travelling
> Maxview shall not be liable for any damages or
injury resulting from improper usage or
installation
Guidelines for the best reception
> Choose the site position where the aerial can be
mounted as high as possible with a clear line of
sight pointing in the direction of the transmitter
with no obstructions e.g trees, buildings blocking
view.
> TV reception may improve with height and the
fewer obstructions between the aerial and the
transmitter the better.
Installation example
Turn over for bracket and mast assembly.
UK Contact:
Helpline: +44 (0)1553 811000
Email: suppor[email protected]o.uk
Web: www.maxview.co.uk
Rate and Like us on Facebook:
Search: ‘Maxviewlimited’ today.
Maxview reserve the right to change specifications without prior notice
9111253 Iss 2
B2006
Jockey Wheel Mast
Installation and user guide
Safety instructions
> Always follow manufacturer’s operating and
safety instructions when using tools and/or
equipment
> Always remove your aerial, mast and clamp
before travelling
> Maxview shall not be liable for any damages or
injury resulting from improper usage or
installation
Guidelines for the best reception
> Choose the site position where the aerial can be
mounted as high as possible with a clear line of
sight pointing in the direction of the transmitter
with no obstructions e.g trees, buildings blocking
view.
> TV reception may improve with height and the
fewer obstructions between the aerial and the
transmitter the better.
Installation example
Turn over for bracket and mast assembly.
UK Contact:
Helpline: +44 (0)1553 811000
Email: suppor[email protected]o.uk
Web: www.maxview.co.uk
Rate and Like us on Facebook:
Search: ‘Maxviewlimited’ today.
Maxview reserve the right to change specifications without prior notice
9111253 Iss 2
Bracket assembly
Note:
Bracket can be adjusted as above to provide
clearance when jockey wheel mast is centrally
located.
Mast assembly
Assemble mast to the
height desired.
Ensure ground spike
is firmly located to ground.
Bracket assembly
Note:
Bracket can be adjusted as above to provide
clearance when jockey wheel mast is centrally
located.
Mast assembly
Assemble mast to the
height desired.
Ensure ground spike
is firmly located to ground.
Bracket assembly
Note:
Bracket can be adjusted as above to provide
clearance when jockey wheel mast is centrally
located.
Mast assembly
Assemble mast to the
height desired.
Ensure ground spike
is firmly located to ground.
Omnimax Compatibility
To mount an Omnimax you need to:
1. Remove the plastic mast adaptor
2. In the same tube drill a ø13mm hole
100mm from the top.
This will allow fitment of the Omnimax
and a cable exit.
Omnimax Compatibility
To mount an Omnimax you need to:
1. Remove the plastic mast adaptor
2. In the same tube drill a ø13mm hole
100mm from the top.
This will allow fitment of the Omnimax
and a cable exit.
Omnimax Compatibility
To mount an Omnimax you need to:
1. Remove the plastic mast adaptor
2. In the same tube drill a ø13mm hole
100mm from the top.
This will allow fitment of the Omnimax
and a cable exit.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Maxview C3006 Operating instructions
-
-
-
-
Maxview ANT4 User manual
-
-
-
-
-
Maxview C3008 Operating instructions
Other documents
-
InvisaFlow 6383 Operating instructions
-
Amerimax 4660 Operating instructions
-
Amerimax Home Products 8300 Operating instructions
-
InvisaFlow 6360 Operating instructions
-
Titan 3000 85520S Operating instructions
-
Bailey Caravan Owner's manual
-
Philex 27881D4 User manual
-
-
-
