Atdec SD-DO-50-B Datasheet

Atdec
Brand
Atdec
Model
SD-DO-50-B
Category
Notebook arms & stands
Type
Datasheet
Donut 42
Donut Combo
Donut 50
Technical Specifications
SPACEDEC
DONUT 42 & 50 & DONUT COMBO
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 01.02.08
Maximum Load: 11.5 kgs (25lbs)
IMPORTANT: Each of the Donut Bolts must be
tightened evenly. Failure to do so will damage
the Donut Clamp. Do not over-tighten as this
may also result in damage.
9
8
124mm (4
7
/
8
”)124mm (4
7
/
8
”)
* This product is VESA compliant and suits both 75mm (3”) and
100mm (4”) LCD display mounting hole patterns.
NOTE: Add 25mm (1”) for Quick Release
169mm (6
5
/
8
”)
42mm (1
5
/
8
”)
+/- 40 º
Rotation
+/- 40 º
Rotation
+/- 40 º
Rotation
+/- 40 º
Rotation
90mm (3
9
/
16
”)
90mm (3
9
/
16
”)
51mm (2”)
169mm (6
5
/
8
”)
100mm (4”)
75mm (3”)
100mm
(4”)
75mm
(3”)
Note: Extension Clips
are included to suit VESA
100mm x 100mm (4” x 4”)
Mounting Hole Patterns.
  • Page 1 1

Atdec SD-DO-50-B Datasheet

Atdec
Brand
Atdec
Model
SD-DO-50-B
Category
Notebook arms & stands
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents