2. Russound
  3. XTS7
XTS7

Russound XTS7 Product information

  • Hello! I've reviewed the Russound XTS7 Wiring Diagrams document. This document details the installation and features of the XTS7 wall-mounted touchscreen, which can act as a convenient control point for your smart home system. It highlights its ability to connect via PoE or 12V power and integrate into a network using Wi-Fi or Ethernet. It also covers app installation and how to replace older keypads. I'm ready to answer your questions about the device.
  • Can I install my own apps?
    Can I use this with my multi-room audio system?
    Does it require special wiring?
XTS7 BACK
Use an XTS7 as an always available control point
LIVING ROOM
Easy Access to your lights, shades, music and more!
INSTALLER’S DILEMMA
The homeowner has many smarthome components like Lutron lights or shades
and wants a convenient interface that doesn’t require them to have to always use
their phone to change anything in the room.
BENEFITS
• Always available control
• Elegant design blends in with any décor
• Install apps from the Google Play Store
SOLUTION
• Install an XTS7 on the wall
• Connect to PoE or 12v power supply
• Connect to the local network (wired or Wi-Fi)
• Install your system apps like Lutron for lights/shades or a full home control app for a system like
Control4, RTI, URC, etc.
XTS7 WIRING DIAGRAMS
XTS7 Wall-Mounted Touchscreen
XTS7 BACK
Use an XTS7 as an always available control point
LIVING ROOM
Installable anywhere with its Wi-Fi connection
INSTALLER’S DILEMMA
The homeowner wants to add control points around the home but running
CAT5 wires to all of those locations is going to make the bid too expensive
for their budget
BENEFITS
• No long wiring runs needed – Just connect the 12VDC power supply
• Freedom to install in many more locations in the home
• Install apps from the Google Play Store
SOLUTION
• Install an XTS7 on the wall
• Connect to a 12V power supply
• Connect to the local network via Wi-Fi
• Install your system apps like Lutron for lights/shades or a full home control app for a system
like Control4, RTI, URC, etc.
Power
Supply
©2022 Russound/FMP, Inc. All rights reserved. All trademarks are property of their respective owners. Specifications are subject to change without notice. Russound is not responsible for typographical errors or omissions.
Use an XTS7 for your Russound audio system
INSTALLER’S DILEMMA
The homeowner has a multi-room audio system using Russound’s MCA-Series
controllers or MBX-Series products but they don’t want to have to rely on their
phones, iPads or tablets for controlling their system. Having quick access to start
their favorite music, group rooms together, and control any room in the home are
some of the key requirements they have for their system.
XTS7 WIRING DIAGRAMS
XTS7 Wall-Mounted Touchscreen
XTS7 XTS7 XTS7
MCA-88
Power
Supply
Full control from anywhere
LIVING ROOM BEDROOM KITCHEN CLOSET
SOLUTION
• Install an XTS7 on the wall in any rooms where the homeowner wants to have control of
their system: Kitchen, Living Room, Master Bedroom, etc.
• Connect each XTS7 to PoE or 12v power supply
• Connect each XTS7 to the local network (wired or Wi-Fi)
• Use the pre-installed Russound app or install their system apps like Lutron for lights/shades
or a full home control app for systems like Control4, RTI, URC, etc.
BENEFITS
• Always available control
• Elegant design blends in with any décor
• Multiple XTS7 can be installed in the same home to have control points in all desired rooms
• Install apps from the Google Play Store
Upgrade older keypads easily with the XTS7
INSTALLER’S DILEMMA
The homeowner has older keypads in their home like a single-gang
SLK-1 in their Kitchen and a double-gang MDK-C6 in their Living Room
that need replacement.
SLK-1
MDK-C6
MCA-88
Its universal 1-gang, 2-gang and 60mm Euro box design makes it the perfect upgrade
LIVING ROOM KITCHEN CLOSET
BENEFITS
• Fits 1-gang, 2-gang, and 60mm Euro boxes
• Full control of Russound MCA-Series, XStream Series or MBX-Series products
• Elegant design blends in with any décor
• Install apps easily from the Google Play Store
SOLUTION
• Install an XTS7 (or an IPK-1) to replace the single gang SLK-1
• Install an XTS7 to replace the MDK-C6
• Connect each XTS7 to PoE or 12v power supply
• Connect each XTS7 to the local network (wired or Wi-Fi)
• Use the pre-installed Russound app or install their system apps like Lutron for lights/shades
or a full home control app for systems like Control4, RTI, URC, etc.
BEFORE
XTS7XTS7
MCA-88
LIVING ROOM KITCHEN CLOSET
AFTER
Network
POE
Switch
/