Pottinger TERRASEM V 6000 D Z Operating instructions

8816.en.80W.0

Original Operating Instructions

Mulch seeder

TERRASEM V 6000 D Z

8816 : +. . 00001

PÖTTINGER - Trust creates Affinity since 1871

"Quality pays for itself." We therefore apply the highest quality standards to our products,

which are permanently monitored by our in-house quality management team and our man-

agement board Because the safety, perfect function, highest quality and absolute reliability of

our machines in operation are the core competencies for which we stand.

Technical alterations

There may be deviations between these document and the product as we are constantly de-

veloping our products. Therefore no claims may be derived from the data, illustrations and

descriptions. Please contact your Specialist Service Centre for any binding information about

specific features of your machine.

Legal notes

Please note that only the German operating manual constitutes the original operating manual

in regards to the guidelines 2006/42/EC. Operating manuals on languages different than

German, are translations of the German original manual of operation.

We would ask you to please understand that changes to the scope of supply with regard to

form, equipment and technical specifications are possible at any time.

Any form of reprint, translation or reproduction, including excerpts, requires the written appro-

val of PÖTTINGER Landtechnik GmbH.

All rights according to copyright law are expressly reserved by PÖTTINGER Landtechnik

GmbH.

Guarantee and warranty

Please note that the statutory guarantees and warranties granted voluntarily by PÖTTINGER

Landtechnik GmbH can only be invoked for damage stemming from construction, production

and / or material faults.

PÖTTINGER Landtechnik GmbH cannot be held liable for damage stemming from the use of

consumables such as belts, chains, shafts, gears, tyres, knives teeth or tarpaulins or covers

made from fabric materials or for damage stemming directly or indirectly from contact with

foreign bodies (stones, metal fragments, etc.).

You can find additional information about your machine in MyPöttinger.

Are you looking for suitable accessories for your machine? No problem! All the information

you require is here at your disposal. And if we don't have what you're looking for, then your

Specialist Service Centre is there for you with help and advice.

Scan the QR code on the type plate of the machine or visit http://www.mypoettinger.com

2 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Dear Customer,

These Operating Instructions are intended to allow you to familiarise yourself with the ma-

chine and provide you with clear information on the safe and correct handling, care and

maintenance. Therefore, please take the time to read these instructions.

These Operating Instructions are a part of the machine. They are to be kept in a suitable

place and be accessible to personnel at any time throughout the entire service life of the ma-

chine. Instructions based on existing national regulations on accident prevention, road traffic

regulations and environmental protection are to be supplemented.

Any persons commissioned with the operation, maintenance or transport of the machine

must read and understand these instructions prior to starting work, particularly the safety in-

formation. If these instructions are not observed, the warranty claim will be forfeited.

If there are any questions regarding the contents of these Operating Instructions or further

questions regarding the machine, contact your PÖTTINGER service partner.

Timely, meticulous care and maintenance, according to the specified maintenance intervals,

will ensure the machine's operational and traffic safety, and its reliability.

Use only original spare parts or spare parts and accessories that are approved by PÖTTING-

ER Landtechnik GmbH. Only the original spare parts approved by us have been tested by us

and thus have the suitable prerequisites for use in your machine. The use of any unapproved

parts forfeits any guarantee or guarantee claim. Even after the guarantee period has expired

we recommend the use of genuine replacement parts in order to ensure the continuous per-

formance of the machine.

When selling machines, the Product Liability Act obliges the manufacturer and/or the author-

ised dealer to pass on a manual to customers and to instruct the customer on the machine

with reference to the safety, operating and maintenance requirementss. Confirmation in the

form of a Declaration of Transfer is required to verify that the machine and manual have

been passed on correctly. The Declaration of Transfer was enclosed with the machine on de-

livery.

For the purposes of the Product Liability Act, every self-employed person and farmer is an

entrepreneur. Entrepreneurial property damage within the meaning of the Product Liability

Act is therefore excluded from liability by PÖTTINGER. Property damage within the meaning

of the Product Liability Act is damage caused by a machine, but not to it.

The operating instructions are part of the machine, therefore pass them on to any new owner

when passing on the machine. Instruct the new owner and make them aware of the regula-

tions mentioned.

Your PÖTTINGER service team wishes you every success.

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 3

Representation conventions

This section contains explanations for a better understanding of the illustrations, safety and

warning notes and textual descriptions used in these operating instructions.

Safety instructions / warnings

Safety instructions of a general nature are always placed at the beginning of a section. They

warn of dangers that may occur during machine operation or when preparing to work on the

machine. Warnings indicate hazards that may occur directly during an operation or work step

on the machine. Warnings are listed together with the relevant procedures / work steps in the

written instructions.

Safety instructions and warnings are presented as follows:

DANGER

If you do not follow the instructions in a text section with this marking, there is a risk

of fatal or life-threatening injury.

► All instructions in such text sections must be followed!

WARNING

If you do not follow the instructions in a text section with this marking, there is a risk

of severe injury.

► All instructions in such text sections must be followed!

CAUTION

If you do not follow the instructions in a text section with this marking, there is a risk

of injury.

► All instructions in such text sections must be followed!

NOTICE

If you do not follow the instructions in a text section with this marking, there is a risk

of damage to property.

► All instructions in such text sections must be followed!

TIP

Text sections marked in this way contain recommendations and advice for handling the ma-

chine.

ENVIRONMENT

Text sections marked in this way contain advice on the subject of environmental protection.

Text

4 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Directions

Directions (such as left, right, front, rear) are given based on the normal "working travel direc-

tion" of the machine.

Orientation information for an illustration of a machine's details refers to this illustration itself

and is only understood to be relative to the direction of travel in certain cases. The meaning

of the orientation information (if required) is clearly evident from the accompanying text itself.

Designations

These operating instructions designate the interchangeable equipment for agricultural vehi-

cles (as defined in European Directive 2006/42/EC) as machine.

Vehicles intended to drive the existing machine are designated as tractor.

Equipment designated as optional is available only for certain machine models or only in cer-

tain countries.

Cross-references

Cross-references to another location in the operating instructions or another document are

provided in the text, specifying the chapter and subchapter, or section. The naming of sub-

chapters or sections is in inverted commas. (Example: Check all screws on the machine for

tightness. See "Tightening torques" on page xxx). A subchapter or section can be found in

the document via an entry in the table of contents.

Action steps

An arrow or sequential numbering indicates action steps you should take.

A black bordered, indented arrow or sequential, indented numbering indicates intermedi-

ate results or intermediate steps that should be performed.

Illustrations

Illustrations may differ in detail to your machine and should only be considered as a principle

representation/symbol illustration.

Use of colours

Illustrations in this printed document are shown only in grey scale or black and white.

Illustrations in electronically distributable documents (PDF) are displayed in colour also and

can be printed out in colour if required.

Use of symbols

Illustrations may contain additional symbols, arrows and other lines that serve to improve the

comprehensibility of the image content or are intended to draw attention to a specific area of

the image.

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 5

Instructions for product handover

Please verify the listed items in accordance with the product liability obligation

Please, tick off where appropriate.

Machine checked according to delivery note. All packing materials removed, all

safety devices, cardan shafts and control elements present.

Machine operation, commissioning and maintenance discussed with and explained

to the clients using the operational instructions.

Tyre air pressure verified.

Tightness of wheel nuts verified.

Reference to correct p.t.o. speed and direction of rotation.

Adaptation to tractor complete; three point adjustment, drawbar height, attachment

of handbrake lever in tractor cab, forced steering set, compatibility of all necessary

electrical, hydraulic and pneumatic connectors to tractor checked and established.

Cardan shaft correctly cut to length.

Test run of all machine functions in addition to parking brake and operating brake

completed and no defects noted.

Function explanation during test run.

Tilting to transport and working position explained.

Information regarding optional equipment provided.

References made to compulsory reading of the operational instructions.

Confirmation is required as evidence that the machine and the operating instructions (with a

supplement to the operating instructions for North America depending on the country of des-

tination) have been delivered properly. For this purpose you have received a confirmation e-

mail from PÖTTINGER. If you have not received this mail, please contact your local dealer.

Your dealer can fill in the handover declaration online.

Austria

PÖTTINGER Landtechnik GmbH

Industriegelände 1

4710 Grieskirchen

Phone+43 7248 600-0

Fax+43 7248 600-2513

[email protected]

6 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Amendment index

Date Index Amendment reason Amended chapter

7.12.2021 V.0 Facelift to many

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 7

Factory standard tightening torques

Tightening torque.............................................................................................................. 17

Layout and function

Functional elements.......................................................................................................... 18

Tegosem function elements.............................................................................................. 20

Electrical controls.............................................................................................................. 21

Hydraulic controls.............................................................................................................. 22

Sensors and fitting position............................................................................................... 22

Accessories included in the scope of delivery................................................................... 22

Upgrade program.............................................................................................................. 22

At a glance

Identification...................................................................................................................... 23

Type plate with CE mark ............................................................................................ 23

Description

EU - declaration of conformity........................................................................................... 25

Intended use..................................................................................................................... 27

Non-approved useage....................................................................................................... 27

Technical data

Dimensions....................................................................................................................... 28

Hitching / lower linkage..................................................................................................... 28

Tyres................................................................................................................................. 28

Weights............................................................................................................................. 28

Power requirements.......................................................................................................... 29

Machine operation limits................................................................................................... 29

Load limits......................................................................................................................... 29

Seed placement................................................................................................................ 29

Hydraulics ........................................................................................................................ 30

Brake system.................................................................................................................... 30

Setting the brakes........................................................................................................ 30

Electrics............................................................................................................................. 31

Safeguarding the electrical system................................................................................... 31

Safeguarding the operating function electrical system................................................ 31

Contents

8 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Fuse in the fuse box.................................................................................................... 32

POWER CONTROL Terminal........................................................................................... 33

EXPERT 75 Terminal........................................................................................................ 34

Terminal CCI 1200............................................................................................................ 34

Noise emission.................................................................................................................. 34

Safety and the environment

Safety advice..................................................................................................................... 35

Qualification of personnel.................................................................................................. 35

Performing maintenance work.......................................................................................... 35

Organisational measures.................................................................................................. 35

Maintaining operational safety.......................................................................................... 36

Special hazards................................................................................................................. 36

Safety devices................................................................................................................... 37

Warning signs................................................................................................................... 38

Traffic safety equipment.................................................................................................... 43

Operational danger area................................................................................................... 46

Handling hazardous substances....................................................................................... 48

Fuel efficiency and soil protection..................................................................................... 48

Disposal of the machine.................................................................................................... 49

Power-Control Terminal operation

Overview of the POWER CONTROL terminal.................................................................. 50

Input keypad................................................................................................................ 50

EXPERT 75 ISOBUS-Terminal

EXPERT 75 Terminal overview......................................................................................... 52

Input keypad................................................................................................................ 52

CCI ISOBUS-Terminal

CCI 1200 Terminal overview............................................................................................. 54

ISOBUS operation

Input masks....................................................................................................................... 55

Selection masks................................................................................................................ 56

Structure of control unit..................................................................................................... 57

Contents

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 9

START screen................................................................................................................... 59

WORK menu..................................................................................................................... 61

Status bar.................................................................................................................... 68

SET menu......................................................................................................................... 70

4.1 Seed library - overview.......................................................................................... 70

Seed library - data sheet................................................................................................... 72

Seed library - metering wheel proposal............................................................................. 74

4.1.2 Calibration menu................................................................................................ 75

Calibration - step 1: Adjust dosing unit.............................................................................. 76

Calibration - step 2: Control and predosing....................................................................... 78

Calibration - step 3: Calibration......................................................................................... 79

Calibration - step 4: Weight input...................................................................................... 81

Calibration - step 5: Conclude........................................................................................... 82

4.1.3 Creation of tramlines.......................................................................................... 87

4.1.4 Manual speed specification and seed amount adjustment................................. 89

4.1.5 Surface test........................................................................................................ 91

Surface test - step 1 Adjust metering system.................................................................... 91

Surface test - step 2 Weight input..................................................................................... 93

Calibration - step 3: Complete........................................................................................... 94

4.2.1 Radar sensor...................................................................................................... 95

Radar sensor..................................................................................................................... 96

4.4 Softkey allocation.................................................................................................. 97

Test menu......................................................................................................................... 99

Test menu 1 - sensors................................................................................................. 99

Test menu 1.1 - sensors................................................................................................... 99

Test menu 1.2 - signal source speed................................................................................ 101

Test menu 2 - dosing system / tank............................................................................. 103

Test menu 2.1 - dosing unit 1 tab...................................................................................... 104

Test menu 2.2 - dosing unit 2 tab...................................................................................... 106

Test menu 3 - Hydraulics............................................................................................. 106

Test menu 4 - IDS distributor head.............................................................................. 109

Test menu 5 - seed flow monitoring............................................................................ 112

Status of seed flow sensors - LED.................................................................................... 113

Data Menu......................................................................................................................... 114

Error-List........................................................................................................................... 114

Seed Complete (Option)

Seed Complete................................................................................................................. 123

Contents

10 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Attaching to tractor............................................................................................................ 124

Seed drill control system................................................................................................... 125

Seed drill general control system................................................................................ 125

Seed drill control: variable sowing rate............................................................................. 126

Manually changing the distribution amount dosing 1 / dosing 2 (only with fertilizer ma-

chines):.............................................................................................................................. 127

Switching the output quantities on/off transmission.......................................................... 127

CCI command.............................................................................................................. 128

General............................................................................................................................. 128

3. Tab Geometry............................................................................................................... 129

Check the values adopted from the seed drill control:...................................................... 131

Fields:................................................................................................................................ 131

Section Control.................................................................................................................. 131

Operating with CCI.Command.......................................................................................... 133

Seed drill control: with part-width control..................................................................... 137

Preparation for CCI.Control............................................................................................... 142

First steps.................................................................................................................... 142

First steps.......................................................................................................................... 143

Producing a job file with the application map.................................................................... 143

Generating a job file with two application maps................................................................ 144

Generating an order file without application maps............................................................ 144

Exporting the job file from FMIS to the Isobus terminal.................................................... 144

Import the order data from CCI.Control....................................................................... 144

Unlocking apps.................................................................................................................. 144

Switching between apps.............................................................................................. 146

Seed Complete wiring diagram................................................................................... 147

Operation of the functional elements

Machine functions............................................................................................................. 149

Turn blower on and off................................................................................................. 149

Valves / cover / auxiliary equipment

Opening / closing cover and valves.................................................................................. 150

Seed hopper pressure tank cover............................................................................... 150

Seed hopper seed discharge....................................................................................... 151

Blower air distributor:................................................................................................... 151

Dosing wheel housing................................................................................................. 152

Fit / remove dosing wheel............................................................................................ 154

Contents

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 11

Dosing system............................................................................................................. 155

Distributor head without half-machine shut-off............................................................ 155

Switching the distributor head outlets off manually..................................................... 156

Auxiliary and special functions.......................................................................................... 156

Collection bag.............................................................................................................. 156

Telescopic drawbar..................................................................................................... 157

Extend the telescopic drawbar.......................................................................................... 158

Retract the telescopic drawbar.......................................................................................... 158

Climbing aids to the operating or loading platform...................................................... 159

Steps for the side loading platform.................................................................................... 159

Transport guard

Transport safeguards........................................................................................................ 162

Locking hooks and securing pins................................................................................ 162

Stopcock for hydraulic functions.................................................................................. 164

Operation

Initial operation.................................................................................................................. 166

Brief instructions.......................................................................................................... 166

Adapting the tractor hydraulics.................................................................................... 167

Emergency-brake adjustment bolt position (hydraulic single pipe brake H1L)............ 167

Breakaway cable attachment (emergency brake valve hydraulic single pipe brake

H1L)............................................................................................................................. 168

Attaching the machine................................................................................................. 169

Determine tractor ballast............................................................................................. 171

Determine the required tractor ballast weights using the weighing method...................... 172

Determine the required tractor ballast weights using calculation...................................... 174

Adjusting and retrofitting................................................................................................... 175

Track looseners (option).............................................................................................. 175

Track marker (Optional)............................................................................................... 176

Track marker adjustment.................................................................................................. 177

Track marker marking disc................................................................................................ 181

Settings for the distributor head inserts....................................................................... 184

Distributor head insert for row spacing 75cm.................................................................... 184

Distributor head insert for row spacing 50cm.................................................................... 186

Distributor head insert for row spacing 37.5cm................................................................. 188

Distributor head insert for row spacing 25cm.................................................................... 190

Dismounting the distributor head insert............................................................................. 192

Contents

12 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Hydraulic blower drive................................................................................................. 193

Basic setting...................................................................................................................... 193

Blower drive basic settings (without Load Sensing operation).......................................... 194

Blower drive basic settings (with Load-Sensing operation)............................................... 195

Adjust seed dosage (Fertilizer).................................................................................... 197

Switching between single shot, single shot mix, and separate seed and fertilizer appli-

cation................................................................................................................................. 199

Distribution unit and Tramlines (Machines with no electric butterfly valves)..................... 199

Distribution unit and Tramlines (Machines with electric butterfly valves).......................... 201

Sowing tables for electric dosing....................................................................................... 202

Dosing wheel overview..................................................................................................... 205

Maximum output rate for TEGOSEM........................................................................... 206

Adapt coulter system................................................................................................... 207

Seed sowing depth............................................................................................................ 208

Setting the coulter pressure rollers................................................................................... 209

Hydraulic coulter pressure................................................................................................ 211

Contact pressure (ground adaptation) of the folding sections..................................... 213

Front board (option)..................................................................................................... 215

Disc-System................................................................................................................ 216

Levelling board............................................................................................................ 220

Settings for the edge plates......................................................................................... 222

Setting the harrow (optional)....................................................................................... 225

Levelling harrow settings............................................................................................. 227

Levelling harrow add-on.................................................................................................... 230

Adjusting the tramline marker (optional)...................................................................... 232

Feeler wheel (option)................................................................................................... 234

fertiliser coulter (optional) must be used...................................................................... 235

Auxiliary tank for Tegosem (option)............................................................................. 236

Tramlines: for example, for laying..................................................................................... 238

Coupling............................................................................................................................ 241

Compressed air braking system (option)..................................................................... 241

Disconnect air brake system connecting lines.................................................................. 243

Connect hydraulic hoses............................................................................................. 244

Connect cable.............................................................................................................. 245

Mounting the POWER CONTROL terminal................................................................. 245

Fit EXPERT 75 ISOBUS terminal ............................................................................... 246

Mounting the CCI 1200 terminal.................................................................................. 247

Connect the tractor terminal........................................................................................ 247

Contents

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 13

Work assignment.............................................................................................................. 248

The function of the hydraulic connections................................................................... 249

Transport run............................................................................................................... 249

Transport on loading surfaces..................................................................................... 250

Turning manoeuvres on slopes................................................................................... 250

Fill the seed hopper..................................................................................................... 250

Filling auger (option).................................................................................................... 251

Switch machine from road transport position to working position (standard).............. 253

Sowing with POWER CONTROL Terminal / ISOBUS Terminal.................................. 255

Switch machine working position to transport position (standard)............................... 256

Empty the seed hopper............................................................................................... 258

Auxiliary tank for Tegosem (option)............................................................................. 259

Decommissioning ............................................................................................................. 260

Empty the dosing wheel/dosing wheel housing........................................................... 261

Release pressure tank cover....................................................................................... 262

Uncouple the machine from the tractor....................................................................... 262

Uncoupling........................................................................................................................ 262

Dismounting the POWER CONTROL terminal............................................................ 263

Remove EXPERT 75 Terminal.................................................................................... 264

Dismantle CCI 1200 terminal....................................................................................... 265

Separate the tractor terminal....................................................................................... 265

Unplug cable................................................................................................................ 265

Disconnect the hydraulic hoses................................................................................... 266

Attach anti-theft device................................................................................................ 266

Care and maintenance

Ensure operational readiness........................................................................................... 268

General tips....................................................................................................................... 268

Daily maintenance............................................................................................................. 269

Brake fluid fill level....................................................................................................... 269

Check the brake hoses and hose couplings................................................................ 270

Air tank........................................................................................................................ 271

Check hydraulic system............................................................................................... 272

Check / change lighting of lamps................................................................................. 273

Check / replace warning signs, warning triangles, warning sheets............................. 274

After every season (winter storage).................................................................................. 275

Clean the dosing wheel housing and the dosing wheel............................................... 275

Clean detachable dosing wheels................................................................................. 277

Contents

14 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Clean inside the seed hopper...................................................................................... 283

Clean and protect the machine.................................................................................... 284

Sowing coulter scrapers.............................................................................................. 284

Intake strainer.............................................................................................................. 286

As required........................................................................................................................ 288

Clean the dosing wheel housing and the dosing wheel............................................... 288

Clean inside the seed hopper...................................................................................... 290

Clean terminal............................................................................................................. 291

Clean outside of the machine...................................................................................... 292

Front board wearing parts........................................................................................... 292

Harrow tines wear limit................................................................................................ 294

Replace the track loosener chisel coulter ................................................................... 295

Thrust roller replacement............................................................................................. 296

After service life................................................................................................................. 297

After first 10 hours of operation................................................................................... 297

Retighten the axle bolts and nuts...................................................................................... 297

Every 20 operating hours............................................................................................ 298

Lubricate filling auger swivel mechanism.......................................................................... 298

Lubricate feeler wheel swivel bearing............................................................................... 299

Every 200 operating hours.......................................................................................... 300

Check the brake pads....................................................................................................... 300

Every 2 years............................................................................................................... 301

Change brake fluid............................................................................................................ 301

Oil and oil filter change...................................................................................................... 301

Every 6000 hectares.................................................................................................... 302

Check / replace tyre packer wheel bearing....................................................................... 302

Every 4 years............................................................................................................... 302

Check and adjust hydraulic pressure accumulator........................................................... 302

Every 6 years............................................................................................................... 303

Hydraulic hoses................................................................................................................. 303

Lubrication chart................................................................................................................ 304

Operating materials

Equipment specification.................................................................................................... 306

Operating materials and filling quantities.......................................................................... 306

Contents

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 15

Help and advice

What to do if...................................................................................................................... 307

Display values / display symbols incorrect.................................................................. 307

Seed delivery faulty..................................................................................................... 308

Terminal deactivated................................................................................................... 309

Lighting........................................................................................................................ 309

Sensors

Sensor troubleshooting..................................................................................................... 311

Status of IDS motor sensors............................................................................................. 311

Status of seed flow sensors.............................................................................................. 311

Plans

Wiring diagrams................................................................................................................ 313

Equipment table........................................................................................................... 313

Hydraulics.................................................................................................................... 316

Hydraulic plan Terrasem V 6000....................................................................................... 316

Supplement to USA / CANADA operating instructions

Warning signs, GB / USA / CANADA................................................................................ 318

Secure towing of loads...................................................................................................... 325

Index 326

Contents

16 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Tightening torque

This factory standard applies to all metric bolts for which no special tightening torque is

specified in the drawing/manual. The relevant grade is visible on the bolt head.

• The values given are nominal and are valid for a head friction rate of IJ=0.14 and a

thread friction of IJ=0.125 Slight tensioning force differences can exist through differing

friction rates. The values given are to be kept to a tolerance of ± 10%.

• By using the given tightening torque and the existing friction rate used, then up to 90%

of the minimum yield strength of the bolt material is used in accordance with DIN ISO

898 .

• If a specific tightening torque is given for a bolt connection, then all these bolt connec-

tions are to be tightened to the specified tightening torque using a torque wrench.

Thread Grade 8.8 Grade 10.9

Tightening tor-

que in Nm

Tensioning force

in N

Tightening tor-

que in Nm

Tensioning force

in N

M 4 3.1 4000 4.4 5700

M 5 6.2 6600 8.7 9300

M 6 10.5 9300 15 13000

M 8 25 17000 36 24000

M 10 50 27000 70 38000

M 12 86 39500 121 56000

M 14 135 54000 195 76000

M 16 215 75000 300 105000

M 20 410 117000 580 164000

M24 710 168000 1000 237000

M 30 1400 270000 2000 380000

M 8 x 1 27 18700 38 26500

M 10 x 1.25 53 29000 74 41000

M 12 x 1.25 95 44500 130 63000

M 14 x 1.5 150 60000 210 85000

M 16 x 1.5 230 81000 320 115000

M 20 x 1.5 460 134000 650 189000

M 24 x 2 780 188000 1090 265000

Factory standard tightening torques

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 17

Functional elements

Designation and function

Pos. Element Function

1 The drawbar / tele-

scopic drawbar

with attached rock-

er

enables tight curve turning on headlands. During transporta-

tion; telescopic (optional).

Drawbar with towing eye; telescopic (optional)

2Support stand Ensures stability when the machine is parked.

3 Toolbox For tool storage

4 Disc system (Disc

harrow)

The maintenance-free, rubber-mounted discs loosen the soil

over the entire surface.

5 Side loading plat-

form

Loading platform with steps for upkeep and maintenance work

in left folding section.

The side platform is only to be used when machine is in the op-

erating position.

6Fertilizer coulter Ensures that the fertilizer or seed from metering system 2 is

correctly positioned

7 Tyre packer The tyre packer ensures controlled and uniform recompacting

ahead of the coulters and serves as a chassis for road trans-

portation.

8 DUAL DISC dou-

ble-disc coulters

The coulter system deposits the seed in the sowing furrow.

9 Coulter pressure

rollers

Coulter pressure rollers ensure safe soil closure by re-com-

pacting the furrow.

10 Tramline markers

Standard (Option)

Tramline markers denote the tramlines that are kept free of

seed for machines that follow. Hydraulic drive, automatic or

semi-automatic control.

11 Harrow The harrow closes the sowing lines and evenly covers the seed

with soil.

12 Track marker (Op-

tional)

The track marker indicates the track to be driven. Hydraulic

drive, automatic control.

13 Loading platform Loading platform with ladder and steps for upkeep and mainte-

nance work and filling the pressure tank.

The loading platform can only be used when the machine is in

operating position.

14 Distributor head For uniformly distributing the seed on the sowing hose that

leads to the plough share system. Mechanically or electrically

controlled valves at the outputs allow the sowing hose to be

blocked when required.

15 Pressure tank for

metering system 2

The rear tank is designated as tank 2.

16 Pressure tank for

metering system 1

The front tank is designated as tank 1.

Layout and function

18 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Pos. Element Function

17 Fan The hydraulically powered fans create the air flow required for

the pneumatic delivery of the seed.

18 Hose holder Store the hydraulic hose and cable in the hose holder when the

machine is turned off.

Designation and function

Pos. Element

27 Disc harrow field / Levelling board lift

28 Blower

29 Front board (Option)

30 Seed hopper - Filling auger (Option)

31 Sowing bar lift and coulter pressure adjustment

32 Tramline markers Special driving lanes (Option)

33 Track looseners for single and double tyres (Optional)

Layout and function

8816.en.80W.0 Original Operating Instructions TERRASEM V 6000 D Z | 19

Tegosem function elements

(Optional equipment)

Designation and function

Pos. Element

34 Additional tank

35 Seed line

36 Feeder unit: to divert the seed from the additional tank into the seed flow of the

seeder (both sides)

37 Spreading bar: to distribute the seed from the seed flow of the additional tank

Layout and function

20 | Original Operating Instructions TERRASEM V 6000 D Z 8816.en.80W.0

Page is loading ...

Pottinger TERRASEM V 6000 D Z Operating instructions

Related papers

Other documents