2. Hafele
  3. 805.87.210

Hafele 805.87.210 User guide

  • Hello! I've reviewed the Product Guide for the TAG Hardware Shoe rail and Shoe rail bracket. This document details the features of the product, including its angled mounting option, customizable width and multi-position mounting. I'm ready to answer any specific questions you may have about the shoe rail and bracket components described in this guide.
  • How many Shoe Rail Brackets are required per rail?
    Does the Shoe Rail Bracket need additional hardware to mount?
    Can the shoe rail be set level?
OPTIONS
FINISHED
PRODUCT
DIMENSIONS
SPECS +
MAL
MNL
ORB
MATTE
ALUMINUM
MATTE
NICKEL
OIL RUBBED
BRONZE
CR
POLISHED
CHROME
FEATURES
Angled shoe rail
beautifully presents
your shoes on
an incline
Also be set at the
same level for shoes
without heels
Customizable to t
any section width of
your choice
Bracket features
a multi-position
mounting design
BRACKET FINISH:
300.3122.xxx
300.3120.xxx
BRACKET
SHOE RAIL
SHOE STORAGE
shoe rail + bracket
300.3122.xxx 300.3120.xxx
SHOE RAIL FINISH:
WHITE
ALMOND
(FINISH)
(FINISH)
PRODUCT GUIDE
SHOE RAILS
300.3122.[FIN]
INSTRUCTIONS & SPECIFICATIONS
STEP 1: Chose the mounting positions to suit the shoes being stored.
STEP 2: Slide the Shoe Rail Brackets over the Shoe Rails.
STEP 3: Position Shoe Rail in between the partitions at desired height.
STEP 4: Press Shoe Rail Brackets into System holes.
DESCRIPTION & SPECIFICATIONS
This angled shoe rail will beautifully present your shoes on an incline and can
also be set at the same level for shoes without heels.
-
Two Shoe Rail Brackets 300.3120 required per rail.
SIZE & CAPACITY
|
36”
AVAILABLE FINISHES
|
Matte Aluminum, Polished Chrome, Matte Nickel, Oil Rubbed Bronze, Matte Brass, Polished Brass.
14"
36"
Shoe Rail
14"
Shoe Rail Bracket
Shoe Rail Bracket
www.TAGHardware.comStorage Accessories. Differentiated by Design.
FINISH CODE (FIN)
MATTE ALUMINUM MAL
POLISHED CHROME CR
MATTE NICKEL MNL
OIL RUBBED BRONZE ORB
MATTE BRASS MBS
POLISHED BRASS BS
PRODUCT GUIDE
SHOE RAIL BRACKETS
300.3120.BLK/AL/WH
INSTRUCTIONS & SPEC IFICATIONS
STEP 1: Chose the mounting positions to suit the shoes being stored.
STEP 2: Slide the Shoe Rail Brackets over the Shoe Rails.
STEP 3: Position Shoe Rail in between the partitions at desired height.
STEP 4: Press Shoe Rail Brackets into System holes.
DESCRIPTION & SPECIFICATIONS
The Shoe Rail Bracket is used to mount shoe rails directly into the system
holes of the partitions. No additional mounting hardware required.
-
No additional hardware is required to mount.
SIZE & CAPACITY
|
ONE SIZE
AVAILABLE FINISHES
|
Black, White, Almond.
32mm
3/4”
Shoe Rail Bracket
14"
Shoe Rail Bracket
www.TAGHardware.comStorage Accessories. Differentiated by Design.
FINISH CODE (FIN)
BLACK BLK
WHITE WH
ALMOND AL
SHOE RAIL BRACKET
300.3122.MAL
/