TANDBERG Codec 3000 MXP Reference guide

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

• Designed for custom integrations

• 19” mountable codecs

• Expandability for future applications

• Total management via serial port, embedded web

server, SNMP, Telnet, XML, HTTP / HTTPS, FTP and

on screen menu

• Best possible call for each MultiSite participant with

rate matching and transcoding

• URI dialling

• H.323, H.320 & SIP support

• TANDBERG Expressway™ Technology

• Protection against network interruptions in point-

to-point and multipoint calls with automatic

downspeeding and IPLR

• Standards-based embedded encryption

(AES & DES)

Software version F7.X

D 13887.08

MAY 2008

Codec

MXP

3000

6000

REFERENCE

FOR SYSTEM

INTEGRATORS

We recommend that you check out the

TANDBERG web site regularly for updated

versions of this manual:

http://www.tandberg.com/support/

documentation.php

Thank you for choosing TANDBERG!

The TANDBERG Codec 3000 MXP and Codec 6000 MXP

have been designed to provide you with many years of

safe, reliable operation.

This section of the User Guides contains an overview of

what’s new in this version and the Table of Contents.

Our objective with this Reference User Guide for System

Integrators has been to address your goals and needs.

Please let us know how well we succeeded!

Finding the Information You Need

3

D 13887.08

MAY 2008

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

What’s New in This Version?

Finding the Information You Need

There are a number of new and altered instructions available in

version F7.1

Configuration Commands

CallVideoSource: <0/1/5/6>

New in this version. The Call Video Source is the default call

video source you would prefer to use in a call.

Conference PeriodicIntra: <0..1000>

New in this version. Use this setting to generate a new intra

frame with a congurable interval. Use this setting with caution

since it in a normal network will decrease the video quality. The

default value is set to 0 which means off. If you congure it to

10 it will send an intra every 10th second.

Conference VideoText: <On/Off/Auto>

New in this version. In MultiSite calls you can display the names

of the participants on screen. By setting the Video Text Time-out

setting, the system is congured to display the names for a

period of time or as long as you are connected.

Conference VideoTextTimeout: <0..30>

New in this version. Sets the timer for the On-screen name

of participants in MultiSite calls. Set the timer to display the

names for a period of time or as long as you are connected.

CorporateDirectory Protocol: <HTTP/HTTPS>

New in this version. TANDBERG MXP systems now support

secure management when communicating with the TMS

(TANDBERG Management Suite).

Directory CallLog: <On/Off>

New in this version. Enable/disable Call Logs for Placed calls,

Missed calls and Received calls in the Phone Book.

DynamicResolution Mode <Auto/Off>

New in this version. With Dynamic Resolution the system will

use the optimal video resolution for the chosen bandwidth. This

feature is only applicable to HD (high denition) calls.

If set to Auto and in a HD call: the resolution will differ between

the bandwidths 720p, 576p and 448p, dependent on how much

motion it is in the picture. The call will start with 720p and

change to a lower resolution when there is a lot motion. It will go

back to 720p with less motion.

If set to Off: Disables the Dynamic Resolution feature (the

default setting).

ExternalManager Protocol: <HTTP/HTTPS>

New in this version. Enables/disables for secure management.

ExternalServices Protocol: <HTTP/HTTPS>

New in this version. Enables/disables for secure management.

HTTPS VerifyServerCerticate: <On/Off>

New in this version. TANDBERG MXP systems now support

secure management when communicating with the TMS.

For more information see the TANDBERG White Paper “Imple-

menting Secure Management” which describes how to congure

secure HTTPS between TANDBERG products. To nd the docu-

ment, follow the link: http://www.tandberg.com/support/docu-

mentation.php and select White Papers.

Kiosk OneClickConnect: <On/Off>

New in this version. If turned On, you can make a call with a

single click on the green call button on the remote control. The

system will call the rst entry in “My Contacts” in the Phone

Book. NOTE: This functionality will only work in Kiosk Mode

If set to Off: Does not allow for one click connect in Kiosk mode.

MaxBandwidth: <128..10240>

New in this version. Limit max bandwidth usage for the system.

Related to IPMedia MaxVideoTXRate, which only controls up-

stream bandwidth.

OSD CallDuration Mode: <On/Off>

New in this version. The call duration can be displayed on

screen. The timer showing the duration of the call is displayed in

the bottom right corner of the screen.

OSD Menu IconPlacement: <Left/Right>

New in this version. Applies to the following icon indicators:

Microphone Off, Volume Off, On Air, Encryption, Bad Network,

Telephone, Duo Video and Camera Tracking. Places the icons in

the top left corner or the top right corner of the screen.

OSD Menu Language: < English/German/Norwegian/French/

Swedish/Danish/Italian/Portuguese/Japanese/Chinese/Tradi-

tionalChinese/Russian/Spanish/Korean/Finnish/Thai/Arabic>

Altered in this version. Added Danish menu language to the list.

SerialPort 1 Mode: <Control/Transparent/Direct>

Altered in this version. Control: Gives access to the Command

Line Interface. Transparent: Enables transmission of text during

call on a line by line basis. Direct: Enables transmission on

binary data during call. NOTE! Only Serial Port 1.

SerialPort 1 Direct Buffer: <0..16384>

New in this version. Species the size of the buffer used in di-

rect mode. Try setting this value higher if you need a continuous

stream of data on the receiving end. Higher values introduces

more delay. NOTE! Only Serial Port 1.

SIP ReplyTo URI: <S: 0, 60>

New in this version. If congured it is this URI that will be dis-

played in the call lists.

SIP Server Type: <S: 0, 60>

Altered in this version. Added Siemens to the list of SIP server

type. Must be used when registering to a Siemens HiPath 8000.

Video Inputs Source 5 HorizAdjust: <0..255>

New in this version. This gives you the possibility to adjust the

placement of the pc image on screen. Much like the setting you

nd on a regular pc screen. NOTE! Only Video Input Source 5.

Video Outputs Animation <On/Off>

New in this version. The new PiP/PoP animation makes the

windows fade or slide into position when changing the picture

layout. PiP means Picture in Picture layout and PoP means Pic-

ture outside Picture layout.

Conguration commands for TANDBERG Remote Control

Enable or disable keys, and using conguration instead of com-

mands.

Key Number0: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

4

D 13887.08

MAY 2008

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

What’s New in This Version?

Finding the Information You Need

Key Number1: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number2: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number3: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number4: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number5: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number6: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number7: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number8: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Number9: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Star: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Square: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Connect: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Disconnect: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Up: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Down: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Right: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Left: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Selfview: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Layout: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Phonebook: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Cancel: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key MicOff: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Presentation: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key VolumeUp: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key VolumeDown: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Ok: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key ZoomIn: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key ZoomOut: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control.

Key Grab: <On/Off>

New in this version. Enables/disables the signal which is sent

to the codec when grabbing the TANDBERG Remote Control.

Key Cabinet: <On/Off>

New in this version. Enables/disables the headset key in front

of the cabinet. Applies to TANDBERG 1000 MXP only.

Key Presets: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key FarEnd: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key Services: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

5

D 13887.08

MAY 2008

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Key Help: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key MainCam: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key PC: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key DocCam: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key VCR: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Key AUX: <On/Off>

New in this version. Enables/disables the given key on the

TANDBERG Remote Control (TRC4).

Command Instructions

Observe that the (r) in the Command instructions denotes that

the parameter is required. The (r) appears for your information

only and is not a part of the instruction.

There are no new xCommand instructions for this version.

Status Information Commands

There are no new xStatus instructions for this version.

What’s New in This Version?

Finding the Information You Need

D 13887.08

MAY 2008

6

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Finding the Information You Need

What’s New in This Version? ............................................... 3

Configuration Commands .............................................. 3

Command Instructions .................................................. 5

Status Information Commands ...................................... 5

Intellectual Property Rights

Disclaimer

License Information and Patent Information

License Agreements .................................................... 11

Patent Information ...................................................... 11

Operator Safety / Environmental Issues

Safety Instructions ........................................................... 13

Water and Moisture ..................................................... 13

Cleaning ..................................................................... 13

Ventilation .................................................................. 13

Lightning ..................................................................... 13

Dust ........................................................................... 13

Vibration ..................................................................... 13

Power Connection and Hazardous Voltage .................... 13

Servicing ....................................................................13

Accessories ................................................................ 13

Communication Lines .................................................. 13

Environmental Issues ....................................................... 14

TANDBERG’s Environmental Policy ............................... 14

European Environmental Directives .............................. 14

Waste Handling .......................................................... 14

Information for Recyclers ............................................. 14

Digital User Guides .................................................... 14

China RoHS Table........................................................ 15

What’s in the Shipping Box?

Contents of the 3000 MXP Codec Shipping Box ................. 17

Contents of the 6000 MXP Codec Shipping Box ................. 18

Interfaces and Sockets – Codec 3000 MXP

Rear Panel Socket– and Interface Groups .........................20

Codec 3000 M X P .................................................................... 20

Codec 3000 M X P Net ..................................................20

Audio Sockets.................................................................. 21

Audio signal levels in Vpp and dBu .................................... 22

Video Sockets ................................................................. 23

Camera Socket ................................................................ 24

ISDN BRI sockets ............................................................ 25

Net socket ....................................................................... 26

Network Interface Sockets ............................................... 27

Power Socket & On/Off Switch ......................................... 28

Interfaces and Sockets – Codec 6000 MXP

Rear Panel Socket– and Interface Groups .........................30

Audio Sockets.................................................................. 31

Audio Signal Levels in Vpp and dBu................................... 32

Video Sockets .................................................................33

Net Interface Socket ........................................................ 34

Network Interface Sockets ............................................... 35

Camera Sockets .............................................................. 36

Data Ports ....................................................................... 37

Power Socket & On/Off Switch .........................................38

About the TANDBERG API

Introduction .....................................................................40

Basic Principles ..........................................................40

The TANDBERG API Engine ...........................................40

Structuring of Information ............................................ 40

Addressing Using XPath or TANDBERG SimplePath ....... 40

Feedback .................................................................... 40

Dataport Interface on the Classic Systems ................... 41

XACLI .............................................................................. 42

Accessing XACLI ......................................................... 42

Connecting to XACLI using the Dataport (RS 232) ......... 42

Hardware & Cabling (RS 232) ....................................... 42

Troubleshooting (RS 232) ............................................. 42

Data Port (RS 232) ...................................................... 42

Cable wiring TANDBERG MXP ↔ PC via RS 232 ............. 42

XACLI – the Basics ........................................................... 43

Root Commands ......................................................... 43

XACLI – Main Types of Commands .................................... 44

Special Commands ..................................................... 44

Configuration Type Commands .....................................44

Status Type Commands ...............................................44

Command Type Commands .........................................44

XACLI – Configuration Type Commands ............................. 45

XACLI – Configuration Type Operation ..............................46

Configuration Help ...................................................... 46

Configuration Read ......................................................46

Configuration Set (Write) .............................................46

XACLI – Configuration Types ............................................. 47

Format for Value Types ................................................ 47

XACLI – Command-type – xcommands/xdirectory ...............48

Getting an Overview .................................................... 48

What’s in this

User Guide?

D 13887.08

MAY 2008

7

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Command help ............................................................ 48

How to Get an Overview of Supported Commands ......... 48

XACLI – Command-type – Issuing a Command ................... 49

Issuing a Command ..................................................... 49

Sequence Notation ..................................................... 49

Command Response ................................................... 49

Combination of Markup Notation and Sequence ........... 49

XACLI – Command-type – Parameter Value Types .............. 50

Command Parameter Value Types ................................ 50

Format for Value Types ................................................ 50

XACLI – Status Type Commands ....................................... 51

Understanding Status Information Structuring .............. 51

XACLI – Status Type – Default Formatting .......................... 52

Default XACLI Formatting ............................................. 52

About the Examples Provided ...................................... 52

XACLI – Status Type – Complete Path Formatting............... 53

XACLI – Status Type – XML Formatting .............................. 54

XACLI – Status Type – Addressing Status Information ........ 55

XACLI – Status Type – Exposure Options ........................... 56

XACLI – Special Commands – xfeedback ........................... 57

XACLI – Special Commands – xpreferences ....................... 59

The xpreferences Options ............................................ 59

xpreferences xpathwrite .............................................. 59

xpreferences xmlcommandresult ................................. 59

xpreferences detaillevel ............................................... 59

xpreferences xmlconfigfeedback .................................. 59

xpreferences xmlstatusfeedback ................................. 60

xpreferences itemnumber ............................................60

xpreferences completepath ......................................... 61

XACLI – Special Commands – xgetxml ............................... 62

TXAS - TANDBERG XML API Service ................................... 63

Bare-bone HTTP(S) Access ..........................................63

Configuration-type Commands

Understanding the Table Layout ........................................ 65

AdditionalCamera ........................................................ 66

AlertSpeaker ............................................................... 66

AlertTone .................................................................... 66

AllowLatency ............................................................... 66

AutoAnswer ................................................................. 70

AutoDisplaySnapshot .................................................. 70

AutoLayout.................................................................. 70

AutoPIP ....................................................................... 70

Bonding ...................................................................... 70

CallManager ............................................................... 70

CallVideoSource .......................................................... 71

Camera ...................................................................... 71

CameraDVI ................................................................. 72

CameraSleep .............................................................. 72

CameraTracking .......................................................... 73

Conference ................................................................. 73

CorporateDirectory ...................................................... 77

DefaultPIPPosition ...................................................... 77

Directory ..................................................................... 78

DoNotDisturb .............................................................. 78

DualMonitor ................................................................ 78

DuoVideoSource ......................................................... 78

DynamicResolution ..................................................... 78

E1 .............................................................................. 78

Ethernet ..................................................................... 78

ExternalManager ......................................................... 78

ExternalNetwork .......................................................... 79

ExternalServices ......................................................... 79

FECC .......................................................................... 80

FeedbackFilter ............................................................ 80

FTP ............................................................................. 80

G703 .......................................................................... 80

H320 .......................................................................... 81

H323 .......................................................................... 81

H323CallSetup ........................................................... 81

H323Gatekeeper......................................................... 81

H323Prefix ................................................................. 83

HTTP .......................................................................... 83

HTTPS ........................................................................ 83

IdReport ..................................................................... 83

IEEE802.1x ................................................................. 84

IMUX .......................................................................... 84

Integrator .................................................................... 89

IP ............................................................................... 89

IPMedia ...................................................................... 90

IPProtocol ................................................................... 90

IRControl .................................................................... 90

ISDN ........................................................................... 90

Keyboard .................................................................... 94

Kiosk .......................................................................... 94

Key ............................................................................. 94

Kiosk .......................................................................... 98

LocalLayout .............................................................. 100

Logo ......................................................................... 100

LoS .......................................................................... 100

MainVideoSource ...................................................... 101

MaxBandwidth .......................................................... 101

MCU ......................................................................... 101

NAT .......................................................................... 101

NetProfile ................................................................. 101

NTP .......................................................................... 102

OptionKey ................................................................. 102

OSD ......................................................................... 102

PictureProgram ......................................................... 105

PresentationStart ...................................................... 105

PacketlossDownSpeed .............................................. 105

Preset ...................................................................... 106

QoS .......................................................................... 108

RemoteSwUpgrade .................................................... 110

RTP .......................................................................... 110

Screensaver .............................................................. 110

SelfViewOnStartup .................................................... 110

SerialPort ................................................................. 110

SIP ........................................................................... 111

SNMP .......................................................................112

StartupVideoSource .................................................. 113

StillImageSource .......................................................113

SSH .......................................................................... 113

Streaming ................................................................. 114

StrictPassword: <On/Off> ......................................... 115

Switch ...................................................................... 115

SystemUnit ............................................................... 115

T1 ............................................................................ 116

Telnet ....................................................................... 116

TelnetChallenge ........................................................ 116

Time ......................................................................... 116

UseAsLocalPCMonitor ............................................... 117

Video ........................................................................ 117

VNC .......................................................................... 121

LocalEntry — GroupEntry ................................................. 122

LocalEntry [1..200] .................................................... 122

GroupEntry [1..50] ..................................................... 122

GlobalEntry .................................................................... 123

Configuration Storage Levels

Understanding the Table Layout ...................................... 125

HTTP Mode — IPProtocol ................................................. 131

Video Inputs Source [1..6] Name — VNC Password ......... 139

Command Information Tables

Understanding the Table Layout ...................................... 141

AlertToneTest ............................................................ 142

AudioTestSignal ......................................................... 142

Boot ......................................................................... 143

CallAccept ................................................................ 143

CallMute ...................................................................143

CallMuteOutgoing ...................................................... 143

CallSetAudioTP .......................................................... 144

CameraFocus ............................................................ 144

CameraForceUpgrade ................................................ 144

D 13887.08

MAY 2008

8

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

CameraHalt .............................................................. 144

CameraMove............................................................. 145

CameraPosition ........................................................ 145

CameraReconfigure ................................................... 145

CameraTrackingStart ................................................. 146

CameraTrackingStop ................................................. 146

CameraUpgrade ........................................................ 146

CameraWhiteBalance ................................................ 146

ChairRelease ............................................................ 146

ChairTake .................................................................. 146

ConferenceDisconnect .............................................. 147

ConferenceTerminate................................................. 147

CorpDirSearch .......................................................... 148

CorpDirGetNext ......................................................... 149

CorpDirGetPrevious ................................................... 150

DefaultValuesSet ...................................................... 151

Dial .......................................................................... 152

DialGlobalEntry ......................................................... 153

DialGroupEntry .......................................................... 153

DialLocalEntry ...........................................................153

DisconnectCall .......................................................... 154

DuoVideoStart ..........................................................154

DuoVideoStop ........................................................... 154

DTMFSend ................................................................ 154

FECCFocus ...............................................................154

FECCMove ................................................................ 155

FECCPresetActivate ................................................... 155

FECCPresetStore ....................................................... 155

FECCRequestStill ...................................................... 155

FECCSelectSource .................................................... 155

FeedbackDeregister .................................................. 155

FeedbackRegister ..................................................... 156

FIPSMode ................................................................. 156

FloorRelease ............................................................. 156

FloorRequest ............................................................ 156

FloorToSite ................................................................ 157

FloorToSiteEnd .......................................................... 157

GroupEntryAdd .......................................................... 157

GroupEntryDelete ...................................................... 157

KeyDown .................................................................. 157

KeyRelease ............................................................... 158

KeyPress .................................................................. 158

KeyDisable ............................................................... 158

KeyEnable .................................................................158

LocalEntryAdd ........................................................... 159

LocalEntryDelete ....................................................... 159

MessageBoxDelete ................................................... 159

MessageBoxDisplay .................................................. 160

PIPHide ..................................................................... 160

PIPShow ................................................................... 160

PresetActivate .......................................................... 160

PresetClear ............................................................... 161

PresetStore .............................................................. 161

ProfileActivate ........................................................... 161

ProfileCreate ............................................................. 161

ProfileDelete ............................................................. 161

ProfileList ................................................................. 161

ScreensaverActivate .................................................. 161

ScreensaverDeactivate .............................................. 162

ScreensaverReset ..................................................... 162

SiteDisconnect ......................................................... 162

SiteView ................................................................... 162

SiteViewEnd .............................................................. 162

SPIDAutoConfigure .................................................... 163

StillImageSend .......................................................... 163

StreamingStart ......................................................... 163

StreamingStop ..........................................................163

TextDelete ................................................................ 163

TextDisplay ............................................................... 163

VirtualMonitorReset .................................................. 164

VirtualMonitorSet ...................................................... 164

Status Information Tables

Understanding the Table Layout ...................................... 166

Audio............................................................................. 167

BRI ................................................................................ 168

Call ............................................................................... 170

Camera ......................................................................... 182

CameraSWUpgrade ........................................................183

CameraTracking ............................................................. 184

Conference .................................................................... 185

Ethernet ........................................................................ 191

ExternalManager ............................................................ 192

ExternalNetwork ............................................................ 193

FarEndInformation ........................................................194

Feedback .................................................................... 196

G703 ............................................................................. 197

H323Gatekeeper ........................................................... 198

IP .................................................................................. 199

NTP ............................................................................... 200

PRI ................................................................................ 201

RemoteSwUpgrade ........................................................ 204

Screensaver .................................................................. 205

SIP ..............................................................................206

SoftwareUpgrade ........................................................... 207

Switch .......................................................................... 208

SystemUnit ... ................................................. 210

VirtualMonitor ................................................................ 211

Warning ......................................................................... 212

Call ............................................................................... 213

Call - DisconnectCause .................................................. 214

Call - DisconnectCauseValues ........................................ 215

AuthenticationFailure ..................................................... 218

CallDisconnected ........................................................... 219

CallSuccessful ............................................................... 220

DownspeedingFinished .................................................. 221

MessageBoxResult ........................................................ 222

PacketlossDownSpeed ................................................... 223

SString .......................................................................... 224

SystemActivity ............................................................... 225

Controlling External Cameras

Extcam Protocol Basics .................................................. 227

Far End Video Source Switching ................................. 227

Far End Preset Switching ........................................... 227

The extcap and the extname ...................................... 227

The extswitch ............................................................ 227

Interfacing to the TANDBERG WAVE II Camera ................ 228

Command and Response Exchange Sequence ............ 228

Connecting to the Camera ......................................... 231

Interfacing to the Precision HD Camera ........................... 231

New Commands and Inquiries .................................... 231

TANDBERG Video Switch

Unpacking the Video Switch ...........................................233

The TANDBERG Video Switch set contains: .................233

Cameras ................................................................... 233

Connecting the Video Switch .......................................... 234

Installation of the Video Switch ...................................... 237

Communicating with the Video Switch ............................. 238

Communicating Using VISCA ......................................238

VISCA Interface Basics .............................................. 238

VISCA Serial Ports ..................................................... 238

Enhanced VISCA ....................................................... 238

VISCA Messages ....................................................... 238

VISCA Standard Commands ....................................... 238

VISCA Standard Inquiries ........................................... 238

VISCA Standard Push Messages ................................238

Configuration Commands .......................................... 239

Switch control commands .......................................... 239

Disclaimer and Safety Instructions ................................. 240

Product Declaration ....................................................... 241

We recommend that you check out the

TANDBERG web site regularly for updated

versions of this manual:

http://www.tandberg.com/support/

documentation.php

This Reference Guide for System Integrators and the Products to

which it relates contain information that is proprietary to TANDBERG

and its licensors. Information regarding the Products is found on the

page entitled License Agreements and Patent Information.

This Reference Guide for System Integrators may be reproduced in

its entirety, including all copyright and intellectual property notices, in

limited quantities in connection with the use of the Products. Except

for the limited exception set forth in the previous sentence, no part

of this Reference Guide for System Integrators may be reproduced,

stored in a retrieval system, or transmitted, in any form, or by any

means, electronically, mechanically, by photocopying, or otherwise,

without the prior written permission of TANDBERG. Requests for

such permission should be addressed to tandberg@tandberg.com.

TANDBERG® is a registered trademark belonging to Tandberg ASA.

Other trademarks used in this document are the property of their

respective holders.

Philip Pedersens vei 22, 1366 Lysaker, Norway

Tel: +47 67 125 125 Fax: +47 67 125 234

E-mail: tandberg@tandberg.com

Intellectual Property Rights

We recommend that you check out the

TANDBERG web site regularly for updated

versions of this manual:

http://www.tandberg.com/support/

documentation.php

The specifications for the Products and the information in this

document are subject to change at any time, without notice, by

TANDBERG.

Every effort has been made to supply complete and accurate

information in this Reference Guide for System Integrators,

however, TANDBERG assumes no responsibility or liability for any

errors or inaccuracies that may appear in this document.

INTELLECTUAL PROPERTY RIGHTS

The Products that are covered by this Reference Guide for System

Integrators are protected under copyright, patent, and other

intellectual property rights of various jurisdictions. Any applicable

software licenses and any limited warranty are located in the

License Information section in this System Integrator Reference

Guide.

This Product is

Disclaimer

D 13887.08

MAY 2008

11

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

License Agreements

Copyright notices for third-party software on the TANDBERG

MXP systems are listed below:

The non-commercial third party code is distributed in binary •

form under the terms of non-copyleft style open source

licenses such as BSD, Artistic, or MIT/X Consortium.

The product also contains some binary code distributed in •

binary form under the terms of the GNU public license with

an exemption which allows static links to non-copyleft com-

mercial code.

In accordance with section (3) of the GNU General Public •

License, copies of such code will be provided upon request

by contacting TANDBERG. Please contact us by using the

Online Support section at www.tandberg.com or the “con-

tact us” section of this manual. Please provide USD 10.00

for media and shipping.

Agfa

Contains iType™ from Monotype Imaging Corporation.

CMU-SNMP

CMU-SNMP is distributed under the terms of the CMU SNMP

license which is an open source license similar to a BSD or X

Consortium License.

Dropbear - an SSH2 server

The Dropbear SSH2 server is distributed under the terms of the

Dropbear License which is a MIT/X Consortium style open source

license.

eCos

eCos, the Embedded Configurable Operating System.

Portions of eCos code are distributed under several BSD style

licenses. Other portions of eCos code are distributed under the

terms of the GNU General Public License with a non-copyleft excep-

tion which allows staic links to non-copyleft programs. Portions

of the code are distributed under the terms of various BSD style

licenses.

Copyright 9 2002, 2003 Bart Veer

All or some portions of this file are derived from material licensed

to the University of California by American Telephone and Telegraph

Co. or Unix System Laboratories, Inc. and are reproduced herein

with the permission of UNIX System Laboratories, Inc.

reserved.

This code is derived from software contributed to Berkeley by

Stephen Deering of Stanford University.

ExPat XML Parser

Ltd and Clark Cooper

tainers.

The ExPat XML parser is distributed under the terms of the ExPat

License which is a MIT/X Consortium style open source license

ICU

ICU is distributed under the terms of the ICU license which is a

MIT/X Consortium style license.

OpenSSL

This product includes software developed by the OpenSSL Project

for use in the OpenSSL Toolkit (http://www.openssl.org/)”

rights reserved.

OpenSSL is distributed under the terms of the OpenSSL and SS-

Leay licenses which are both BSD style open source licenses.

snprintf

Snprintf is distributed under the terms of the snprintf license which

is a Frontier Artistic style open source license.

xSupplicant (wpa_supplicant) 802.1x

xSupplicant is distributed under the terms of the xSupplicant

license which is a BSD style open source license.

Patent Information

The products described in this manual are covered by one or more

of the following patents:

US6,584,077 US5,838,664 US5,600,646

US5,768,263 US5,991,277 US7,034,860

US5.886.734 US5990.933 US7,010,119

US7,283,588 EP01953201 GB1338127

Other patents pending.

View www.tandberg.com/tandberg_pm.jsp for an updated list

License Information and Patent Information

We recommend that you check out the

TANDBERG web site regularly for updated

versions of this manual:

http://www.tandberg.com/support/

documentation.php

For your own protection, please read the overleaf safety

instructions completely, before operating the equipment

and keep this manual for future reference. The information

in this summary is intended for operators. Carefully

observe all warnings, precautions and instructions both on

the apparatus and in the operating instructions.

Operator Safety / Environmental Issues

D 13887.08

MAY 2008

13

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

For your protection please read these safety

instructions completely before you connect

the equipment to the power source. Carefully

observe all warnings, precautions and instruc-

tions both on the apparatus and in these

operating instructions.

Retain this manual for future reference.

Water and Moisture

Do not operate the apparatus under or •

near water – for example near a bathtub,

kitchen sink, or laundry tub, in a wet base-

ment, near a swimming pool or in other

areas with high humidity.

Never install jacks for communication •

cables in wet locations unless the jack is

specifically designed for wet locations.

Do not touch the product with wet hands.•

Cleaning

Unplug the apparatus from communication •

lines, mains power-outlet or any power

source before cleaning or polishing. Do not

use liquid cleaners or aerosol cleaners.

Use a lint-free cloth lightly moistened with

water for cleaning the exterior of the ap-

paratus.

Unplug the apparatus from communication •

lines before cleaning or polishing. Do not

use liquid cleaners or aerosol cleaners.

Use a lint-free cloth lightly moistened with

water for cleaning the exterior of the ap-

paratus.

Ventilation

Do not block any of the ventilation open-•

ings of the apparatus. Never cover the

slots and openings with a cloth or other

material. Never install the apparatus near

heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including

amplifiers) that produce heat.

Do not place the product in direct sunlight •

or close to a surface directly heated by the

sun.

Lightning

Never use this apparatus, or connect/discon-

nect communication cables or power cables

during lightning storms.

Dust

Do not operate the apparatus in areas with

high concentration of dust

Vibration

Do not operate the apparatus in areas with

vibration or place it on an unstable surface.

Power Connection and Hazardous

Voltage

The product may have hazardous voltage •

inside. Never attempt to open this product,

or any peripherals connected to the prod-

uct, where this action requires a tool.

This product should always be powered •

from an earthed power outlet.

Never connect attached power supply cord •

to other products.

In case any parts of the product has visual •

damage never attempt to connect mains

power, or any other power source, before

consulting service personnel

The plug connecting the power cord to the •

product/power supply serves as the main

disconnect device for this equipment. The

power cord must always be easily acces-

sible.

Route the power cord so as to avoid it be-•

ing walked on or pinched by items placed

upon or against it. Pay particular attention

to the plugs, receptacles and the point

where the cord exits from the apparatus.

Do not tug the power cord.•

If the provided plug does not fit into your •

outlet, consult an electrician.

Never install cables, or any peripherals, •

without first unplugging the device from it's

power source.

Always use the power supply (AC–DC adap-•

tor) provided with this product (adaptor is

supplied with 3000 MXP only).

Replace only with power supply (AC–DC •

adaptor) specified by TANDBERG (adaptor

is supplied with 3000 MXP only).

Never connect attached power supply •

(AC–DC adaptor) to other products (adaptor

is supplied with 3000 MXP only).

Servicing

Do not attempt to service the apparatus •

yourself as opening or removing covers

may expose you to dangerous voltages or

other hazards, and will void the warranty.

Refer all servicing to qualified service

personnel.

Unplug the apparatus from its power •

source and refer servicing to qualified

personnel under the following conditions:

If the power cord or plug is damaged or •

frayed.

If liquid has been spilled into the •

apparatus.

If objects have fallen into the apparatus. •

If the apparatus has been exposed to •

rain or moisture

If the apparatus has been subjected to •

excessive shock by being dropped.

If the cabinet has been damaged.•

If the apparatus seems to be •

overheated.

If the apparatus emits smoke or •

abnormal odor.

If the apparatus fails to operate •

in accordance with the operating

instructions.

Accessories

Use only accessories specified by the

manufacturer, or sold with the apparatus.

Communication Lines

Do not use communication equipment to

report a gas leak in the vicinity of the leak.

Safety Instructions

D 13887.08

MAY 2008

14

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Thank you for buying a product which contributes to a reduc-

tion in pollution, and thereby helps save the environment. Our

products reduce the need for travel and transport and thereby

reduce pollution. Our products have either none or few consum-

able parts (chemicals, toner, gas, paper). Our products are low

energy consuming products.

TANDBERG’s Environmental Policy

Environmental stewardship is important to TANDBERG’s

culture. As a global company with strong corporate values,

TANDBERG is committed to following international environmen-

tal legislation and designing technologies that help companies,

individuals and communities creatively address environmental

challenges.

TANDBERG’s environmental objectives are to:

Develop products that reduce energy consumption, CO•

2

emissions, and traffic congestion

Provide products and services that improve quality of life for •

our customers

Produce products that can be recycled or disposed of safely •

at the end of product life

Comply with all relevant environmental legislation.•

European Environmental Directives

As a manufacturer of electrical and electronic equipment TAND-

BERG is responsible for compliance with the requirements in

the European Directives 2002/96/EC (WEEE) and 2002/95/EC

(RoHS).

The primary aim of the WEEE Directive and RoHS Directive is

to reduce the impact of disposal of electrical and electronic

equipment at end-of-life. The WEEE Directive aims to reduce

the amount of WEEE sent for disposal to landfill or incineration

by requiring producers to arrange for collection and recycling.

The RoHS Directive bans the use of certain heavy metals and

brominated flame retardants to reduce the environmental

impact of WEEE which is landfilled or incinerated.

TANDBERG has implemented necessary process changes to

comply with the European RoHS Directive (2002/95/EC) and

the European WEEE Directive (2002/96/EC).

Waste Handling

In order to avoid the dissemination of hazardous substances

in our environment and to diminish the pressure on natural

resources, we encourage you to use the appropriate take-back

systems in your area. Those systems will reuse or recycle most

of the materials of your end of life equipment in a sound way.

TANDBERG products put on the market after August

2005 are marked with a crossed-out wheelie bin sym-

bol that invites you to use those take-back systems.

Please contact your local supplier, the regional waste

administration or http://www.tandberg.com/recycling

if you need more information on the collection and recycling

system in your area.

Information for Recyclers

As part of compliance with the European WEEE Directive, TAND-

BERG provides recycling information on request for all types of

new equipment put on the market in Europe after August 13th

2005.

Please contact TANDBERG and provide the following details

for the product for which you would like to receive recycling

information:

Model number of TANDBERG product •

Your company’s name •

Contact name •

Address •

Telephone number •

E-mail. •

Digital User Guides

TANDBERG is pleased to announce that we have replaced the

printed versions of our User Guides with a digital CD version.

Instead of a range of different user manuals, there is now one

CD – which can be used with all TANDBERG products – in a

variety of languages. The environmental benefits of this are

significant. The CDs are recyclable and the savings on paper

are huge. A simple web-based search feature helps you directly

access the information you need. In addition, the TANDBERG

video systems now have an intuitive on-screen help function,

which provides a range of useful features and tips. The con-

tents of the CD can still be printed locally, whenever needed.

Environmental Issues

D 13887.08

MAY 2008

15

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

China RoHS Table

Environmental Issues

We recommend that you check out the

TANDBERG web site regularly for updated

versions of this manual:

http://www.tandberg.com/support/

documentation.php

What’s in the Shipping Box?

This part of the Reference Guide for System Integrators

presents the contents of the shipping box to ease your

acceptance test as well as assist you in making sure

you’ve got everything with you if you need to take the

codec along for installation etc.

17

D 13887.08

MAY 2008

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Remote control

Batteries for remote control

CD with user documentation

Rack mounting kit (I)

Rack mounting kit (II)

Codec 3000 MXP

User

registration

card

Power supply

Up to 4 mains cables

(depending on region)

4 ISDN BRI cables

(not included with the

NET version)

Video DVI–VGA cable

Split cable for

non-TANDBERG WAVE II

cameras

1 LAN / Ethernet cable

What’s in the Shipping Box?

Contents of the 3000 MXP Codec Shipping Box

18

D 13887.08

MAY 2008

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

What’s in the Shipping Box?

Contents of the 6000 MXP Codec Shipping Box

Remote control

Batteries for remote control

CD with user documentation

Rack mounting kit (I)

Rack mounting kit (II)

Codec 6000 MXP

User

registration

card

6 ISDN BRI cables

1 ISDN PRI cable

1 LAN / Ethernet cable

DVI–VGA cable

Up to 4 mains cables

(depending on region)

Mains

extension

cable

We recommend that you check out the

TANDBERG web site regularly for updated

versions of this manual:

http://www.tandberg.com/support/

documentation.php

Interfaces and Sockets – Codec 3000 MXP

This part of the manual provides an in-depth presentation

of the rear panel sockets and interfaces of the Codec

3000 MXP, including the audio signal levels and the

formats supported.

20

Interfaces and Sockets – Codec 3000 MXP

D 13887.08

MAY 2008

TANDBERG 3000 MXP & 6000 MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Audio sockets

Video sockets

DC power socket

and On/Off switch

Network

interface

sockets

PC card

Camera

ISDN BRI

Net socket

Camera

Audio sockets

Video sockets

DC power socket

and On/Off switch

Network

interface

sockets

PC card

Codec 3000 M X P

Codec 3000 M X P Net

The Codec 3000 MXP comes in two avours – with ISDN BRI sockets (upper) or with Net socket (lower).

Ethernet

Rear Panel Socket– and Interface Groups

Page is loading ...

TANDBERG Codec 3000 MXP Reference guide

This manual is also suitable for

TANDBERG Codec 3000 MXP Reference guide

Related papers

Other documents