Logik L02CTEL10 is a corded desk telephone, designed for use on vertical walls constructed of solid brick, solid concrete, solid wood and solid wood columns. It allows you to make and receive calls, redial the last number called, and mute the call so you can speak to someone nearby without your caller hearing you. It also has a pause button for use with some switchboard systems and some BT Calling Features (e.g. Call Waiting), and a recall button for use with some switchboards and some BT calling features (e.g. call waiting).
Logik L02CTEL10 is a corded desk telephone, designed for use on vertical walls constructed of solid brick, solid concrete, solid wood and solid wood columns. It allows you to make and receive calls, redial the last number called, and mute the call so you can speak to someone nearby without your caller hearing you. It also has a pause button for use with some switchboard systems and some BT Calling Features (e.g. Call Waiting), and a recall button for use with some switchboards and some BT calling features (e.g. call waiting).
Instruction Manual
Corded Desk
Telephone
L02CTEL10
Contents
Safety First .................................................................................................. 4
Unpacking ................................................................................................... 6
Getting Started ........................................................................................... 7
Connecting the telephone line cable ..................................................................7
Connecting the handset cable ...............................................................................7
Wall Mounting (optional) ........................................................................... 8
Mounting Stand .......................................................................................... 9
For Wall Mounting .......................................................................................................9
For Desk Mounting .....................................................................................................9
Control Overview ......................................................................................10
Operation ..................................................................................................12
To Make a call ............................................................................................................. 12
To End a call ................................................................................................................ 12
To Receive a call ........................................................................................................ 12
To Redial a call ........................................................................................................... 12
To Mute a all ............................................................................................................... 12
Use in a PBX (Private Branch Exchange) system............................................12
Helpful Information ..................................................................................13
Specications ............................................................................................13
4
Safety First
• For your continued safety and to reduce the risk of injury or electric
shock, please follow all the safety precautions listed below.
• Read all instructions carefully before using the telephone and keep
them for future reference.
• Retain the manual. If you pass the telephone onto a third party, make
sure to include this manual.
• Follow all warnings and instructions marked on the telephone.
• Do not use the product near water for example near a bathtub, kitchen
sink, etc.
• Place the product securely on a stable surface. Serious damage and/or
injury may result if the product falls.
• Do not cover slots and openings on the telephone. They are provided
for ventilation and protection against overheating. Never place the
telephone near radiators, or in places with poor ventilation.
• Do not place objects on the telephone cable. Install the phone where
no one can step or trip on the telephone cable.
• To reduce the risk of injury or electric shock, do not disassemble the
telephone. Incorrect reassembly can cause electric shock when the
product is subsequently used.
• During thunderstorms, avoid using telephones except cordless types.
There may be a remote risk of an electric shock from lightning.
• Do not use the telephone to report a gas leak, when in the vicinity of
the leak.
• Young children should be supervised to ensure that they do not play
with the telephone.
• The telephone is not intended for use by persons (including children)
with reduced sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instructions
concerning the use of the phone by a person responsible for their
safety.
5
CAUTION:
Installation
• Never install telephone wiring during a lightning storm.
• Never install a telephone wall socket in wet locations unless it is
specifically design for use in wet locations.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• The telephone is designed for use on vertical walls constructed of
solid brick, solid concrete, solid wood and solid wood columns. It is
installers responsibility to verify that the wall structure/surface will
safely support the total load (combined weight of telephone base and
handset). If the installer has any uncertainties about the wall structure/
surface, they must contact a qualified installer.
• Do not use this product for any applications other than its intended
purpose.
• Do not over tighten the screws.
6
Thank you for purchasing your new Logik Corded Desk
Telephone.
We recommend that you spend some time to read this Instruction
Manual in order to fully understand how to install and operate it.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose
of it please do so according to local regulations.
Handset Cord
Telephone Line CordHandset
Mounting Stand
Instruction Manual
Main Unit
Instruction
Manual
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
7
Getting Started
Connecting the telephone line cable
Plug the telephone line cable into the socket on the base. Plug the other
end into the telephone wall socket.
Connecting the handset cable
Plug one end of the handset cable into the handset socket and the other
end into the socket at the side of the base.
• If you want to use the phone on a desk or flat surface, press the telephone line
cable into the groove on the underside of the base so that the phone sits flat.
• If you want to wall mount the phone, please refer to the Wall Mounting section.
8
Wall Mounting (optional)
1. Drill holes in the wall.
2. Insert the wall plugs into the hole.
3. Drive in the screws and make sure to leave approximately 5mm of the
screw head from the wall to hold the base securely.
Wall
Wall plug Screw
Wall plug Screw
85 mm
Before you drill any holes, make sure there is no electrical wiring or pipes hidden
in the wall.
9
a
a
b
b
Mounting Stand
For Wall Mounting
Insert the mounting stand onto the bottom of the telephone. This stand
will balance the telephone position when it is mounted onto the wall.
For Desk Mounting
Insert the mounting stand onto the bottom of the telephone.
Follow the diagrams below to remove the mounting stand from the
bottom of the telephone.
10
Control Overview
1
4
2
5
3
6
hook
Recess
For Wall Mounting
11
1. Switch
Allows you to make a follow-on call without replacing the handset.
2. Wallmount hook
Allows your handset to rest securely on the base when it’s wall
mounted.
3. Speaker
This is where you will hear the ringer.
4. Dialpad
Use it for entering the number you will be calling.
5. Mute button
Allows you to speak to someone nearby without your caller hearing
you.
Pause button
For use with some switchboard systems.
R
Recall button
For use with some switchboards and some BT Calling Features (e.g. Call
Waiting).
Last Number Dial button
To redial the last number called.
6. Call light
Red light flashes to indicate an incoming call.
12
Operation
To Make a call
1. Lift the handset and wait for the dial tone.
2. Dial the telephone number.
To End a call
Press the switch or hang up the handset to end the call.
To Receive a call
The telephone rings when you receive a call. Pick up the handset to answer
the call.
To Redial a call
1. Lift the handset and wait for the dial tone.
2. Press the button. The last number called is dialled.
To Mute a all
1. During a call, press and hold the button.
2. Release the button to resume the call.
Use in a PBX (Private Branch Exchange) system
Press the button for pausing and press the
R
button for recalling while
you are using some switchboard systems and some BT calling features (e.g.
call waiting).
13
Specications
Product Dimension: (L20cm x W16cm x H11cm)
Weight: 0.4kg
Dialing Mode: Tone (DTMF)
Operating Environment: 0 - 40°C
Features and specifications are subject to change without prior notice.
Helpful Information
• Environment - Place the unit in a room where the temperature is
between 0°C and 40°C. Allow 5cm clearance around the unit for proper
ventilation. Avoid excessive smoke, dust, mechanical vibration, shock,
or direct sunlight.
• Cleaning - Wipe the unit with a soft cloth. Do not use benzine, thinner,
or any abrasive cleaners.
• If there is no sound - Disconnect the unit from the telephone line
and connect a known working phone. If the known phone does not
operate or have sound, then it could be a phone line problem. Please
contact your telephone company for assistance.
• Moving your phone - Carefully pack your unit, preferably in the
original packaging.
• Disposal - Old units still have some residual value. An environmentally
friendly method of disposal will ensure that valuable raw materials
can be recovered and used again. Up to date information concerning
the disposal of your old unit and packaging from the new one can be
obtained from your local council office.
The symbol on the product or its packaging indicates that this
product must not be disposed of with your other household
waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the
time of disposal will help conserve natural resources and ensure
that it is recycled in a manner that protects human health and the
environment.
For more information about where you can drop o your waste
for recycling, please contact your local authority, or where you
purchased your product.
Visit Partmaster.co.uk today for the easiest way to
buy electrical spares and accessories. With over 1
million spares and accessories available we can
deliver direct to your door the very next day. Visit www.partmaster.co.uk or call
0844 800 3456 (UK customers only). Calls charged at National Rate.
For general information about this appliance
and handy hints and tips, please visit
www.knowhow.com/knowledgebank or call 0844 5611234.
All trademarks are the property of their respective owners and all rights are
acknowledged.
IB-L02CTEL10-160524V4
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Logik L02CTEL10 is a corded desk telephone, designed for use on vertical walls constructed of solid brick, solid concrete, solid wood and solid wood columns. It allows you to make and receive calls, redial the last number called, and mute the call so you can speak to someone nearby without your caller hearing you. It also has a pause button for use with some switchboard systems and some BT Calling Features (e.g. Call Waiting), and a recall button for use with some switchboards and some BT calling features (e.g. call waiting).
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Currys Essentials C01CTEL10 User manual
-
Binatone AC2000 User manual
-
BT Converse 2300 Owner's manual
-
Panasonic KX-TGF320EX Owner's manual
-
-
-
BT 040206 User manual
-
British Telecom CONVERSE 2100 User manual
-
Binatone 410 User manual
-
