IS-52133-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) NOTE: This xture can be mounted on the ceiling or
wall outlet box. Find the appropriate threaded holes
on mounng strap[A] that align with hole distance in
canopy[D]. Thread mounng screws[C] into threaded
holes starng from outlet box[B] side.
2) NOTE: Fixture can be mounted in a horizontal or vercal
posion. Aach mounng strap[A] to outlet box[B]
using the strap mounng screws[E]. Mounng strap can
be adjusted to suit posion of xture.
3) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, and thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
[A] Mounting
Strap
[B] Outlet Box
[C] Mounting
Screws
[D] Canopy
[E] Strap
Mounting
Screws
[F] Lockup Knobs
[G] Lock Washer
4) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
5) Push xture to wall or ceiling carefully aligning the
mounng screws with holes in canopy. Make sure all
wires are inside canopy and do not get pinched between
canopy and wall or ceiling.
6) Place the lock washers[G] onto the mounng screws
and thread lockup knobs[F] onto mounng screws and
ghten to secure xture to wall or ceiling.
7) Insert recommended GU10 bulb by gently twisng into
place. (Not supplied).
8) The shade angles can be adjusted by gently moving /
turning the shades.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons (connued)
A
C
B
E
D
G
F