Sandstrom S40LDIB10 User manual

Brand: Sandstrom

Model: S40LDIB10

Category: LCD TVs

Type: User manual

Instruction Manual

40” / 46” HD Ready 1080p

LED Backlit LCD TV

S40LDIB10 / S46LDIB10

Contents

Unpacking the TV ...................................................................................................................................................................................................3

Preparation ............................................................................................................................................................................... 3

Installing / Removing the Base Stand .............................................................................................................................................................4

Front View and Controls .......................................................................................................................................................................................5

Rear View and Sockets ..........................................................................................................................................................................................6

Installing Batteries in the Remote Control ....................................................................................................................................................7

Remote Control Operation Range ....................................................................................................................................................................7

Remote Control .......................................................................................................................................................................................................8

Connections ............................................................................................................................................................................ 10

Making Video and Audio Connections ........................................................................................................................................................ 10

Connecting an AV Device with HDMI Cable .............................................................................................................................................. 10

Connecting a Computer with DVI to HDMI Adapter or Cable .............................................................................................................11

Connecting a Computer with VGA Cable ....................................................................................................................................................11

Connecting an AV Device with Component (YPbPr) Cable ................................................................................................................. 12

Connecting an AV Device with SCART Adapter Cable ........................................................................................................................... 12

Connecting an AV Device with Composite Cable .................................................................................................................................... 13

Connecting an Audio Receiver with Optical Cable ................................................................................................................................. 13

Using Earphones .................................................................................................................................................................................................. 13

Connecting a USB Storage Device ................................................................................................................................................................. 14

Connecting the Aerial ........................................................................................................................................................................................ 14

Turning the TV On for the First Time ............................................................................................................................................................ 15

Initial Setup ............................................................................................................................................................................ 15

Selecting the Input Source − ................................................................................................................................................................... 16

Channel Selection − ................................................................................................................................................................................... 17

Display Channel Information − .............................................................................................................................................................. 17

Volume Adjustment − ................................................................................................................................................................................ 17

Using the Features ................................................................................................................................................................. 18

Customising the Channel Setting (TV, DTV or Radio Mode) ................................................................................................................ 18

Auto Install − ................................................................................................................................................................................................. 18

DTV Manual Install − .................................................................................................................................................................................. 19

ATV Manual Install − ................................................................................................................................................................................... 19

Programme Edit − ....................................................................................................................................................................................... 20

CI (Common Interface) (DTV Mode) − .................................................................................................................................................. 21

Customising the Picture Setting .................................................................................................................................................................... 22

Customising the Sound Setting ..................................................................................................................................................................... 23

Customising the Screen Settings (VGA Mode).......................................................................................................................................... 24

Customising the Function Setting ................................................................................................................................................................ 24

Language − .................................................................................................................................................................................................... 24

Audio Language (DTV Mode) − .............................................................................................................................................................. 24

Subtitle Language (DTV Mode) − ..........................................................................................................................................................25

Hard of Hearing − ........................................................................................................................................................................................26

OSD Time Out − ........................................................................................................................................................................................... 26

OSD Transparency − ................................................................................................................................................................................... 26

Startup Menu − ............................................................................................................................................................................................ 26

Blue Screen − ................................................................................................................................................................................................ 27

Aerial Power − ............................................................................................................................................................................................... 27

Time − .............................................................................................................................................................................................................. 27

Parental Control − ....................................................................................................................................................................................... 28

Factory Reset − ............................................................................................................................................................................................. 30

Display Area − ............................................................................................................................................................................................... 31

Version − ......................................................................................................................................................................................................... 31

Teletext (TV Mode) .............................................................................................................................................................................................. 32

To Turn on Teletext Function − ............................................................................................................................................................... 32

Digital Teletext (DTV Mode) ............................................................................................................................................................................. 33

Teletext within Digital Service − ............................................................................................................................................................ 33

EPG (Electronic Programme Guide) (DTV Mode) ..................................................................................................................................... 33

Switch On/O EPG − ................................................................................................................................................................................... 33

View a Programme − .................................................................................................................................................................................. 34

Photos ...................................................................................................................................................................................................................... 35

Music ......................................................................................................................................................................................................................... 35

Using the Features via USB Port ...........................................................................................................................................35

Movie ........................................................................................................................................................................................................................ 36

Text Files .................................................................................................................................................................................................................. 36

Maintenance ...........................................................................................................................................................................37

Hints and Tips .........................................................................................................................................................................37

Display Modes ........................................................................................................................................................................39

YPbPr Mode ........................................................................................................................................................................................................... 39

VGA Mode ............................................................................................................................................................................................................... 39

HDMI Mode ........................................................................................................................................................................................................... 39

Specification ...........................................................................................................................................................................40

Safety Warnings ..................................................................................................................................................................... 41

GB-3

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Congratulations on the purchase of your new Sandstrøm TV.

Your new TV has many features and incorporates the latest technology to enhance your viewing

experience. We recommend that you spend some time reading this instruction manual in order that you

fully understand these features. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Remote Control / AAA Batteries x 2

part number 1065888 and

1028333

Instruction Manual

part number: 1066533

TV Base

S40LDIB10 part number:1062367

S46LDIB10 part number:1062617

SCART Adapter Cable

part number: 1064813

Quick Start Guide

part number 1066522

Digital TV Switchover Addendum

part number 1066531

Screws x 4

part number 1044008

Earphone to Audio Cable

part number: 1064814

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0870 6001 338 for assistance.

1 2 3

4 5 6

7 8 9

CH List

Preparation

GB-4

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

To remove the base stand, untighten the 4 screws that 4.

hold the base stand to the rear of the TV. Slide the

base stand out.

Keep all the spare screws should you want to use

the base stand option.

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0870 6001 338 for assistance.

Installing / Removing the Base Stand

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure

that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO

NOT exert pressure on the front of the TV at any time because the screen could crack.

Disconnect all cables connected to the TV.1.

Lay the TV down on a flat surface with the back side 2.

facing up. Please make sure to place a soft cushioned

material (such as a pillow or thick piece of foam)

beneath the screen.

To install the base stand, slide in the base stand until 3.

the screw holes are aligned. Secure the base stand

with the 4 screws.

Remove the base stand before mounting the TV

onto the wall.

Mounting on the wall. This TV is designed to be wall-5.

mounted with a standard 400 mm x 400 mm mounting

kit designed for flat-panel TVs (sold separately).

Mount this TV according to the instructions included

in the mounting kit. Due to the space restriction, we

recommend you to make all connections (refer to page

10-14 for details) before final mounting on the wall.

400 mm

Four mounting holes

(size M9 screw)

Screws x 4

(P.N.1044008)

Slide in

Screws x 4

(P.N.1044008)

Slide out

GB-5

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Front View and Controls

Item Description

1 IR (Infrared Receiver)

Receives IR signals from the remote control.

Do not put anything near the sensor, as its function may be affected.

2 POWER LED

Illuminates red when the TV is in standby mode and flashes for a few seconds when

you turn on the TV. The LED will then remain steady red whilst the TV is switched on.

3 I/O POWER ON/OFF Switch on the I/O POWER ON/OFF switch to turn the TV to standby mode.

4 Touch Control Panel

Touch the touch control panel once to activate it (indicators on the touch control

panel will illuminate), and then press the touch sensitive controls to execute. The touch

control panel will automatically deactivated if untouched for several seconds.

a MENU Displays the OSD (on screen display) menu.

b SOURCE Select among the different input signal sources:

DTV / TV / SCART / AV / Component / VGA / HDMI1 / HDMI2 / HDMI3 / HDMI4 / DMP

c VOL

Adjust the volume.

Select and adjust a setting in the OSD menus.

d CH

Select a channel.

Select a sub-menu of the OSD menu.

Switch the TV on from standby.

Switch the TV back to standby.

1 2

I/O

GB-6

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Rear View and Sockets

Item Description

1 MAINS CABLE Connect the mains cable to the mains socket.

2 SCART

Connect to a VCR, DVD Player, or other AV devices with SCART output socket by using the

SCART adapter cable provided.

3 VGA / PC AUDIO Connect to a computer or other devices with a VGA interface.

4 OPTICAL Connect to an external digital audio device.

5 HDMI1 / 2 / 3 / 4

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all digital audio/

video interface between this TV and any HDMI-device, such as a set-top box, blu-ray disc

player, and AV receiver.

DVI (HDMI1) Connect to a computer or other devices with a DVI interface.

6 USB port

Allows the insertion of a USB storage device to play video, audio, photo and text files by

using the USB extension cable provided (DMP Mode).

7 ANT 75 Ω 5V

50mA/Output Connect to the aerial socket on the wall with the RF coaxial cable.

8 HEADPHONE

Connect earphones for private listening.

9 COMMON INTERFACE Allows the insertion of a Common Access Module. (Refer to page 21 for details.)

10 VIDEO / AUDIO (L/R)

Connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video

devices by using the earphone to audio cable provided.

11 Y, PB, PR

Connect to a DVD player, Digital Set-Top-Box, or other AV devices with component

(YPbPr) video and audio output sockets.

2 3 4 5

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

7 86 5 9 10 11

GB-7

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the

remote control sensor on the TV and within 60° in front of the TV.

The operating distance may vary depending on the brightness of the

room.

Installing Batteries in the Remote Control

Slide the back cover to open the battery compartment of the remote 1.

control.

Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends 2.

of the batteries with the (+) and ( - ) ends indicated in the battery

compartment.

Handling the Batteries

Improper or incorrect use of batteries may cause •

corrosion or battery leakage, which could cause

fire, personal injury or damage to property.

Only use the battery type indicated in this manual.•

When the batteries are exhausted, the remote will •

not function. Replace both batteries at the same

time with new ones.

Do not install new batteries with used ones and •

do not mix different types of batteries.

Do not dispose of used batteries as domestic •

waste. Dispose of them in accordance with local

regulations.

Handling the Remote Control

Take care of your fingernails when you press and •

hold the battery release tab.

Do not drop or cause impact to the remote •

control.

Do not spill water or any liquid on the remote •

control.

Do not place the remote control on a wet object.•

Do not place the remote control under direct •

sunlight or near sources of excessive heat.

Remove the battery from the remote control •

when not in use for a long period of time, as it

could cause corrosion or battery leakage and may

result in physical injury and/or property damage

including fire.

Close the battery compartment cover.3.

1 2 3

4 5 6

7 8 9

CH List

30° 30°

GB-8

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

1 Transmission Indicator

Illuminates red when you press a button.

Switch the TV between on and standby mode.

3 TV/DTV

A short-cut to switch the input source between TV and DTV.

4 Source

Select among the different input signal sources:

DTV / TV / SCART / AV / Component / VGA / HDMI1 / HDMI2 /

HDMI3 / HDMI4 / DMP.

5 0-9 Number Button

Select a programme.

6 Recall

Return to previous viewing channel.

7 Info

Display the present screen information such as the current

channel and the input source.

8 Picture

Selects picture mode: Standard / Soft / User / Bright.

9 FAV

Display the Favourite Channel List.

10 Sound

Selects sound mode: Standard / Speech / User / Music.

Mute and restore your TV sound.

12 VOL

Adjust the volume.

13 CH

Select a channel.

Display the OSD (On Screen Display) menu.

15 EPG

Display the EPG (Electronic Programme Guide). (DTV mode)

Allows you to navigate the OSD menus and adjust the system

settings to your preference.

OK / CH List

Confirm the selection in the OSD menus.

Display a list of channels saved in the TV tuner memory.

17 I/II

Switch between different audio languages:

MONO-NICAM STEREO / MONO-NICAM DUAL1 / NICAM DUAL2.

Only applicable when the TV programme has this feature. (TV

mode)

18 Still

To freeze a picture on screen.

19 Zoom

Allows you to watch the screens in various formats: Auto / 4:3 /

16:9 / Expand / Zoom / Smart Zoom.

20 Exit

Exit the OSD (On Screen Display) menu.

Remote Control

Still

Radio

DMP PVR

Rotate

Lang.

Subtitle

Page downPage up

StopPlay/Pause

Browse

Zoom

Exit

TV/DTV Source

1 2 3

4 5 6

7 8 9

Recall Info

CHVOL

FAV

Sound

Picture

Recall

EPG

CH List

Text Size Reveal Cancel

Hold

Sleep

Index

Sub.Code

Mix

GB-9

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

21 Radio / Browse

A short-cut switch to digital radio channels directly.

(DTV only)

To browse photos in thumbnail view. (DMP mode)

Rotate

Rotate the picture clockwise by 90°.

Lang. / Page up

Change the audio language or audio channel. (DTV

mode)

To skip to previous page. (DMP mode)

Subtitle / Page down

Display the subtitle which is broadcast with the

programme. (TV / DTV mode)

To skip to next page (DMP mode)

22 DMP

A short-cut to switch to DMP mode directly.

Play/Pause

Press to start playback or pause.

Stop

Press to stop playback.

Use to advance or reverse playback rapidly.

To skip to the beginning of the previous or next chapter

/ track / photo. (DMP mode)

Coloured buttons (RED / GREEN / YELLOW / BLUE)

Access the TELETEXT items or programme edit when

using Digital / Freeview TV Channels. (TV / DTV mode)

24 Size

To enlarge the picture on the TV in teletext. (TV mode)

25 Text

Turn on and off the Teletext function. (TV / DTV mode)

26 Reveal

Reveal hidden information such as the answer to a quiz

in Teletext. (TV mode)

27 Cancel

To cancel the teletext mode completely. (TV mode)

28 Hold

Freeze a multi-page passage on screen in Teletext. (TV

mode)

Sleep

Set the TV sleep timer: Off / 10 / ... / 110 / 120 min.

29 Index

Press to select the page number of the Index from

teletext. (TV mode)

30 Sub.Code

Display the sub code bar.

31 Mix

Select TELETEXT with a TV programme.

Still

Radio

DMP PVR

Rotate

Lang.

Subtitle

Page downPage up

StopPlay/Pause

Browse

Zoom

Exit

TV/DTV Source

1 2 3

4 5 6

7 8 9

Recall Info

CHVOL

FAV

Sound

Picture

Recall

EPG

CH List

Text Size Reveal Cancel

Hold

Sleep

Index

Sub.Code

Mix

Please note the function of the PVR button is not supported in this TV.

GB-10

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Making Video and Audio Connections

Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and

connections procedures.

When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are

complete.

Best Video

Performance

Signal Type

Separate audio

connection required

HDMI

(480i/480p/576i/576p/720p/1080i/1080p)

DVI

(480i/480p/576i/576p/720p/1080i/1080p)

Yes

VGA

Yes

Component Video

(480i/480p/576i/576p/720p/1080i/1080p)

Yes

SCART (RGB input) No

Composite Video

Yes

Connections

Connecting an AV Device with HDMI Cable

This TV can accept High-Definition Multimedia Interface (HDMI) and supports HDCP (High-Bandwidth Digital Content •

Protection) Protocol.

This TV has a total of 4 HDMI input sockets, please make sure the correct input source is selected corresponding to your •

connected HDMI input socket.

When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to •

the HDMI function and the TV will automatically detect the resolution used by the HDMI source.

To get the best picture quality, adjust the blu-ray disc player, game console or set top box output resolution up to 1920 x •

1080p.

Blu-ray Player / DVD Player /

Recorder

Set-top BoxGame Console

HDMI Cable

(not included)

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

HDMI

Use a HDMI cable to connect the TV’s HDMI input socket (HDMI1-4) to an external AV device’s HDMI output socket. 1.

Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the3.

button to turn on your TV.

Press the 4. Source button to display the input source list. Use the

buttons to select HDMI1 / HDMI2 / HDMI3 / HDMI4

corresponding to your connected HDMI input socket and then press the OK button or the

button to confirm.

Although this TV is able to connect to HDMI device, it is possible that some devices may not operate correctly.

GB-11

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Connecting a Computer with VGA Cable

Use a VGA cable to connect the TV’s VGA input socket to a computer’s VGA output socket. Use an audio cable to connect the 1.

TV's PC AUDIO input socket to the computer’s audio output socket.

Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the3.

button to turn on your TV.

Press the 4. Source button to display the input source list. Use the

buttons to select VGA and then press the OK button or

the

button to confirm.

• The best resolution is 1920 * 1080 60Hz.

If your computer is set to shut down after a few minutes of idle mode, the TV will also switch to standby due to •

no signal being received, this is to save energy. Press the

button to restart the TV.

VGA Cable

(not included)

Audio Cable

(not included)

Computer

Connecting a Computer with DVI to HDMI Adapter or Cable

Use a DVI to HDMI adapter or cable to connect the TV’s DVI / HDMI1 input socket to a computer's DVI output socket. Use an 1.

audio cable to connect the TV's DVI AUDIO input socket to the computer's audio output socket.

Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the3.

button to turn on your TV.

Press the 4. Source button to display the input source list. Use the

buttons to select HDMI1 and then press the OK button

or the

button to confirm.

Audio Cable

(not included)

Computer

DVI to HDMI Adapter / Cable

(not included)

GB-12

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Connecting an AV Device with Component (YPbPr) Cable

Use a component cable to connect the TV’s YPbPr input sockets to an external AV device’s component output sockets. 1.

Use the supplied earphone to audio cable and an AV cable to connect the TV’s AUDIO(L/R) input socket to the external AV 2.

device’s component audio sockets. (Audio Left = white, and Audio Right = red)

Component port on the TV Y Pb Pr

Video output ports on DVD

player

Y Pb Pr

Y Cb Cr

Plug the connected devices into the mains socket before switching on the 3. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the4.

button to turn on your TV.

Press the 5. Source button to display the input source list. Use the

buttons to select Component and then press the OK

button or the

button to confirm.

Satellite Receiver

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

AV Cable (not included)

Component Cable (not included)

Earphone to

Audio Cable

(included)

Video Camera

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

Yellow (VIDEO)Yellow (VIDEO)

Red (R)

Pb/Cb

Pr/Cr

Red (R) Red (R)

White (L) White (L) White (L)

COMPONENT

OUT

Connecting an AV Device with SCART Adapter Cable

Use the supplied SCART adapter cable to connect the TV’s SCART input socket to an external AV device’s SCART output socket. 1.

Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the3.

button to turn on your TV.

The TV will change the input source to 4. SCART automatically once the AV device is switched on.

Satellite Receiver

VCR

DVD Player / Recorder

Set-top Box

SCART Adapter Cable

(included)

GB-13

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Connecting an AV Device with Composite Cable

Use the supplied earphone to audio cable and an AV cable to connect the TV’s AUDIO(L/R)/VIDEO input sockets to an external 1.

AV device’s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red)

Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the3.

button to turn on your TV.

Press the 4. Source button to display the input source list. Use the

buttons to select AV and then press the OK button or

the

button to confirm.

Satellite Receiver

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

AV Cable (not included)

Earphone to

Audio Cable

(included)

Video Camera

VCR

DVD Player / Recorder

Set-top Box

Game Console

Yellow (VIDEO) Yellow (VIDEO)

Red (R) Red (R) Red (R)

White (L) White (L) White (L)

Connecting an Audio Receiver with Optical Cable

Use an optical cable to connect the TV’s OPTICAL output socket to an audio receiver’s OPTICAL input socket. 1.

Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the3.

button to turn on your TV.

Optical Cable

(not included)

Audio Receiver

Connecting Earphones

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

Earphones Cable

(not included)

Connect your earphones to the TV's

HEADPHONE socket.

Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a

comfortable listening level.

Listening to loud sounds for prolonged periods of time may permanently damage your hearing.

GB-14

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Connecting the Aerial

Connect one end of the RF coaxial cable to the aerial socket on the

wall and the other end of the cable to the ANT socket on the right

rear side of your TV.

Do not connect the TV to the mains supply until you have

completed all the connections.

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

RF coaxial cable

(not included)

Connecting a USB Storage Device

COMMON INTERFACE

ANT 75 Ω

5V 50mA/Output

USB Cable

(not included)

AdapterPortable

Hard Disk

USB

Switch off the TV before connecting any USB storage device.1.

Connect your USB storage device to the USB port of your TV.2.

Plug the connected devices into the mains socket before switching on the 3. I/O POWER ON/OFF switch at the bottom of the

TV.

Press the4.

button to turn on your TV.

Press the 5. Source button to display the input source list. Press the

buttons to select DMP and then press the OK button or

the

button to confirm. (refer to page 35 for details.)

• If a hard disk is used, make sure its mains adapter is connected to the mains supply.

The maximum supported storage space of the hard disk is 1 TB.•

The file system only supports FAT32 format.•

Disconnect the USB storage device if it is not in use.•

The TV may take a few seconds to read the content in your USB storage device.•

GB-15

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Turning the TV On for the First Time

Connect the mains cable to the mains socket after you have 1.

completed all the connections.

Switch on the 2. I/O POWER ON/OFF switch at the bottom of the

TV. At this stage, the TV switches to standby mode. The red LED

indicator will illuminate on the front panel of the TV.

Touch the touch control panel of the TV once to activate it 3.

(indicator on the touch control panel will illuminate), and then

press the touch sensitive control

on the touch control panel or

press the

button on the remote control directly to turn the TV

on. The red LED indicator will flash for a few seconds.

Always disconnect the TV from the mains socket when not in use for a long period of time.

The

button is only used for switching the TV into standby, it does not disconnect the TV from the mains power.

To completely disconnect the mains power, please remove the mains plug from the mains socket or switch off the

I/O POWER ON/OFF switch.

The first time you turn the TV on, it will go straight into the4.

Installation Guide menu. (If you have already installed the

TV using the Quick Start Guide, please go to the next step

"Selecting the Input Source" on the next page.)

Press the5.

button to highlight Mode Setting and then press

the

buttons to change the mode setting.

Home Mode

Designed for home viewing.

(All user settings are saved after switching off the

TV.)

In s ta l l at i on Gu i de

Mode Setting Home Mode

Language English

Country UK

Auto Install

Select Adjust Return

Shop Mode

Designed for in shop viewing.

(Picture settings are not saved after switching off

the TV.)

A pop-up screen will be displayed if shop mode

is selected. Press the

button to select "Yes" on

screen and then press the OK button to confirm.

I n s ta l lat i on G u i de

Mode Setting Home Mode

Language English

Country UK

Auto Install

Select Adjust Return

In Shop Mode, your settings will not be saved.

Are you sure to select Shop Mode?

Yes No

Press the 6. button to highlight Language and then press the

buttons to select the your desired language to be displayed

on the menu.

Initial Setup

In s ta ll a ti on G u i d e

Mode Setting Home Mode

Language English

Country UK

Auto Install

Select Adjust Return

I/O

To mains socket

LED indicator

GB-16

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Selecting the Input Source

Press the 1. Source button to display the input source list.

Press the 2.

buttons to select the input source that you want: DTV / TV /

SCART / AV / Component / VGA / HDMI1 / HDMI2 / HDMI3 / HDMI4 / DMP.

Press the 3. OK button to confirm your selection.

Alternative

Press the • TV/DTV button to switch the input source between TV

and DTV.

Press the • Radio button to switch to digital radio channels directly.

Press it again to return to the previous DTV channel.

Press the • DMP button to switch to DMP mode directly.

A pop-up screen will be displayed. Press the 9. buttons to

select the following options and the

buttons to adjust the

setting.

Country selection To select the country where you will operate

the TV.

Add channel only Yes To only add channels to the existing

channel list.

No To retune and overwrite the

existing channel list. (It is always

recommended to select "No")

Press the 10.

button to select Start on the screen and then

press the OK button to start the auto tuning. Auto tuning will

commence. This operation may take up to 15 minutes. The

display will show the progress of the tuning and the number

of channels found. After auto tuning is complete, the first DTV

channel tuned will be displayed on screen.

Press the 8. button to highlight Auto Install and then press the

OK button or the

button to confirm.

Mode Setting Home Mode

Language English

Country UK

Auto Install

OK Enter Select Return

0 Channel (s)

TV :

DTV :

RADIO :

Skip

Tuning may take up to 15 mins.

Press the 7. button to highlight Country and then press the

buttons to select the country where you will operate the TV.

In s ta ll at i on G ui de

Mode Setting Home Mode

Language English

Country UK

Auto Install

Select Adjust Return

In s ta ll at i on G ui de

Mode Setting Home Mode

Language English

Country UK

Auto Install

Select Adjust Return

Add channel only

Country selection

Please ensure aerial is plugged in!!

Start

GB-17

PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

Channel Selection

Press the • CH buttons on the remote control repeatedly or the 0-9

buttons to select the channel.

Alternative

In DTV mode, press the CH List button to display the Channel List.

Press the

buttons to select a channel and then press the OK

button to view the selected channel.

If a blocked channel is selected, the password screen will be displayed.

Press the 0-9 buttons to enter the password, the channel will then be

unlocked (refer to page 29 for details on Block Programme).

Press the • FAV button to view the Favourite List. Press the buttons to

select a channel and then press the OK button to view the selected channel

if you have previous preset your favourite channels (refer to page 20 for

details on Programme Edit).

Select OK Enter Return

Press the • Recall button to return to the previously viewed channel.

Display Channel Information

Press the • Info button to view the current information.

Volume Adjustment

Press the • VOL buttons on the remote control to adjust the volume.

If you wish to switch the sound off, press the •

button, press again to resume audio listening.

You can also press the VOL

button on the remote control twice or press the VOL button on the touch panel 3 times to

resume audio listening.

GB-18

Preparation Connections Initial Setup Using the Features Using the Features

via USB port

Hints and Tips, Specification

and Safety Warnings

A pop-up screen will be displayed. Press the 3. buttons to

select the following options and the

buttons to adjust the

setting.

Country selection To select the country where you will operate

the TV.

Add channel only Yes To only add channels to the existing

channel list.

No To retune and overwrite the

existing channel list. (It is always

recommended to select "No")

Press the 4.

button to select Start on the screen and then

press the OK button to start the auto tuning. Auto tuning will

commence. This operation may take up to 15 minutes. The

display will show the progress of the tuning and the number of

channels found.

Using the Features

Customising the Channel Setting (TV, DTV or Radio Mode)

Auto Install

Use this to automatically find and store all available channels. This is normally recommended if some channels have been added/

removed by the broadcaster or you have moved house.

Press the 1.

Menu button and then press the buttons to select the

Channel menu.

Press the 2.

button to select Auto Install and then press the OK button or

the

button to confirm.

0 Channel (s)

TV :

DTV :

RADIO :

Skip

Tuning may take up to 15 mins.

CI Information

Programme Edit

OK Enter Select Return

CI Information

Programme Edit

OK Enter Select Return

Add channel only

Country selection

Please ensure aerial is plugged in!!

Start

If you want to skip the DTV tuning, press the 5. Menu button to interrupt

the tuning half way. A pop-up screen will be displayed, press the

button

to select Yes and then press the OK button to confirm. You will then go

straightly into the ATV tuning. You may repeat the above step if you also

want to skip the ATV tuning.

After the tuning is complete, press the 6. Exit button to exit. The channels are

arranged in a preset order. If you wish to skip channels, modify the preset

order or rename channels, select Programme Edit under the channel menu

(refer to page 20 for details).

Page is loading ...

Sandstrom S40LDIB10 User manual

Brand: Sandstrom

Model: S40LDIB10

Category: LCD TVs

Type: User manual

Download PDF

report

Sandstrom S40LDIB10 User manual

Sandstrom S40LDIB10 User manual

Related papers

Other documents