@ejkilZk`feDXelXc
*)É?;I\X[p('/'g
C<;9XZbc`kC:;KM
J*)C;@9('
Contents
Preparation ............................................................................................................................................................................... 3
Unpacking the TV ...................................................................................................................................................................................................3
Installing / Removing the Base Stand .............................................................................................................................................................4
Front View and Controls .......................................................................................................................................................................................5
Rear View and Sockets ..........................................................................................................................................................................................6
Installing Batteries in the Remote Control ....................................................................................................................................................7
Remote Control Operation Range ....................................................................................................................................................................7
Remote Control .......................................................................................................................................................................................................8
Connections ............................................................................................................................................................................ 10
Making Video and Audio Connections ........................................................................................................................................................ 10
Connecting an AV Device with HDMI Cable .............................................................................................................................................. 10
Connecting a Computer with VGA Cable ....................................................................................................................................................11
Connecting an AV Device with Component (YPbPr) Cable ..................................................................................................................11
Connecting an AV Device with SCART Adapter Cable ........................................................................................................................... 12
Connecting an AV Device with Composite Cable .................................................................................................................................... 12
Connecting an Audio Receiver with Optical Cable ................................................................................................................................. 12
Connecting Earphones ...................................................................................................................................................................................... 13
Connecting a USB Storage Device ................................................................................................................................................................. 13
Connecting the Aerial ........................................................................................................................................................................................ 13
Initial Setup ............................................................................................................................................................................ 14
Turning the TV On for the First Time ............................................................................................................................................................ 14
Selecting the Input Source − ................................................................................................................................................................... 16
Channel Selection − ................................................................................................................................................................................... 17
Presetting Favourite Channel List 1 / 2 / 3 / 4 − ................................................................................................................................ 17
Favourite Channel Selection − ............................................................................................................................................................... 17
Display Channel Information − .............................................................................................................................................................. 17
Volume Adjustment − ................................................................................................................................................................................ 17
Using the Features ................................................................................................................................................................. 18
Customising the Picture Setting .................................................................................................................................................................... 18
Video Size (Aspect Ratio) − ...................................................................................................................................................................... 19
Customising the Sound Setting ..................................................................................................................................................................... 20
Customising the Screen Settings (VGA Mode) ......................................................................................................................................... 20
Customising the Function Setting ................................................................................................................................................................ 21
OSD Language − .......................................................................................................................................................................................... 21
Blue Screen − ................................................................................................................................................................................................ 21
Startup Menu − ............................................................................................................................................................................................22
OSD Setting − ...............................................................................................................................................................................................22
Subtitle Language (DTV Mode) − ..........................................................................................................................................................22
Timer − ............................................................................................................................................................................................................ 23
Version Info − ................................................................................................................................................................................................25
Factory Reset − .............................................................................................................................................................................................25
Customising the Parental Setting ..................................................................................................................................................................25
Change Password − .............................................................................................................................................. 25
Parental Rating − ........................................................................................................................................................................................ 26
Channel Block − ........................................................................................................................................................................................... 27
Customising the Channel Setting (TV or Radio Mode) .......................................................................................................................... 28
Manual Install − ............................................................................................................................................................................................ 28
Auto Install − ................................................................................................................................................................................................. 29
Channel Edit − ..............................................................................................................................................................................................30
CI (Common Interface) (DTV Mode) − .................................................................................................................................................. 31
Teletext (TV Mode) .............................................................................................................................................................................................. 32
To Turn on Teletext Function − ............................................................................................................................................................... 32
Digital Teletext (DTV Mode) ............................................................................................................................................................................. 33
Teletext within Digital Service − ............................................................................................................................................................ 33
EPG (Electronic Programme Guide) (DTV Mode) ..................................................................................................................................... 33
Switch On/O EPG − ................................................................................................................................................................................... 33
View a Programme − ..................................................................................................................................................................................34
Using the Features via USB Port ...........................................................................................................................................35
Picture ...................................................................................................................................................................................................................... 35
Music......................................................................................................................................................................................................................... 35
Video......................................................................................................................................................................................................................... 36
Maintenance ...........................................................................................................................................................................38
Hints and Tips .........................................................................................................................................................................38
Display Modes ........................................................................................................................................................................40
YPbPr Mode ...........................................................................................................................................................................................................40
VGA Mode ...............................................................................................................................................................................................................40
HDMI Mode ............................................................................................................................................................................................................ 40
Specification ........................................................................................................................................................................... 41
Safety Warnings .....................................................................................................................................................................42
GB-3
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Quick Start Guide
part number 1067330
Digital TV Switchover Addendum
part number 1066531
Congratulations on the purchase of your new Sandstrøm TV.
Your new TV has many features and incorporates the latest technology to enhance your viewing
experience. We recommend that you spend some time reading this instruction manual in order that you
fully understand these features. You will also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Unpacking the TV
Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
TV
SCART Adapter Cable
part number: 1064813
TV Base
part number 1063101
Audio Adapter Cable
part number: 1064814
Screws x 4
part number 1031741
Remote Control / AAA Batteries x 2
part number 1068126 and
1028333
Component Adapter Cable
part number: 1065884
Instruction Manual
part number: 1067329
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0870 6001 338 for assistance.
1 2 3
4 5 6
7 8 9
0
OK
CH List
Preparation
GB-4
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
To remove the base stand, untighten the 4 screws that 4.
hold the base stand to the rear of the TV. Slide the
base stand out.
Keep all the screws should you want to use the
base stand option.
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0870 6001 338 for assistance.
Installing / Removing the Base Stand
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure
that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO
NOT exert pressure on the front of the TV at any time because the screen could crack.
Disconnect all cables connected to the TV.1.
Lay the TV down on a flat surface with the back side 2.
facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam)
beneath the screen.
To install the base stand, slide in the base stand until 3.
the screw holes are aligned. Secure the base stand
with the 4 screws.
Remove the base stand before mounting the TV
onto the wall.
This TV is designed to be wall-mounted with a 5.
standard 100 mm x 100 mm mounting kit designed
for flat-panel TVs (sold separately). Mount this TV
according to the instructions included in the mounting
kit. Due to the space restriction, we recommend you to
make all connections (refer to pages 10-13 for details)
before mounting onto the wall.
100 mm
100 mm
Four mounting holes
(size M9 screw)
Screws x 4
(P.N.1031741)
Slide in
Screws x 4
(P.N.1031741)
Slide out
GB-5
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Front View and Controls
Item Description
1 IR (Infrared Receiver)
Receives IR signals from the remote control.
Do not put anything near the sensor, as this will affect its performance.
2 POWER LED
Illuminates red when the TV is in standby mode and flashes for a few seconds when
you turn on the TV. The LED will remain red whilst the TV is switched on.
3 I/O POWER ON/OFF Switch on the I/O POWER ON/OFF switch to turn the TV to standby / off mode.
4 Touch Control Panel
Touch the touch control panel once to activate it (indicators on the touch control
panel will illuminate), and then press the touch sensitive controls to execute. The touch
control panel will automatically deactivate if untouched for several seconds.
a MENU Displays the OSD (on screen display) setup menu.
b SOURCE
Select from the different input signal sources:
TV / AV / Component / SCART / VGA / HDMI1 / HDMI2 / HDMI3 / DMP
c VOL
Adjust the volume.
Select and adjust a setting in the OSD setup menus.
d CH
Select a channel.
Select a sub-menu of the OSD setup menu.
e
Switch the TV on from standby.
Switch the TV back to standby.
1 2
3
a
c
d
e
b
I/O
4
GB-6
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Rear View and Sockets
Item Description
1 MAINS CABLE Connect the mains cable to the mains socket.
2 VGA / PC AUDIO Connect to a computer or other devices with a VGA out / PC audio out interface.
3 USB port Allows the insertion of a USB storage device to play video, audio, photo (DMP Mode).
4 VIDEO / AUDIO (L/R)
Connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video
devices by using the audio adapter cable provided.
5 Y, PB, PR
Connect to a DVD player, Digital Set-Top-Box, or other AV devices with component
(YPbPr) video and audio output sockets by using the component adapter cable provided.
6 HDMI1 / 2 / 3
Connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc
player, or AV receiver.
7 OPTICAL Provide digital audio out to an external digital audio amplifier device.
8 ANT 75 Ω Connect to the aerial socket on the wall with the RF coaxial cable.
9 SCART
Connect to a VCR, DVD Player, or other AV device with a SCART output socket by using
the SCART adapter cable provided.
10 HEADPHONE
Connect earphones for private listening.
11 COMMON INTERFACE Allows the insertion of a Common Access Module. (Refer to page 31 for details.)
1
2 3 5 64
11109876
GB-7
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Remote Control Operation Range
Point the remote control at the TV no more than 6 metres from the
remote control sensor on the TV and within 60° in front of the TV.
The operating distance may vary depending on the brightness of the
room.
Installing Batteries in the Remote Control
Slide the back cover to open the battery compartment of the remote 1.
control.
Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends 2.
of the batteries with the (+) and ( - ) ends indicated in the battery
compartment.
Handling the Batteries
Improper or incorrect use of batteries may cause •
corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
Only use the battery type indicated in this manual.•
When the batteries are exhausted, the remote will •
not function. Replace both batteries at the same
time with new ones.
Do not install new batteries with used ones and •
do not mix different types of batteries.
Do not dispose of used batteries as domestic •
waste. Dispose of them in accordance with local
regulations.
Handling the Remote Control
Take care of your fingernails when you press and •
hold the battery release tab.
Do not drop or cause impact to the remote •
control.
Do not spill water or any liquid on the remote •
control.
Do not place the remote control on a wet object.•
Do not place the remote control under direct •
sunlight or near sources of excessive heat.
Remove the battery from the remote control •
when not in use for a long period of time, as it
could cause corrosion or battery leakage and may
result in physical injury and/or property damage
including fire.
Close the battery compartment cover.3.
1 2 3
4 5 6
7 8 9
0
OK
CH List
30° 30°
6M
GB-8
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
1 Transmission Indicator
Illuminates red when you press a button.
2
Switch the TV between on and standby mode.
3 TV
A short-cut to switch the input source to TV mode directly.
4 Source
Select from the different input signal sources:
TV / AV / Component / SCART / VGA / HDMI1 / HDMI2 / HDMI3 /
DMP.
5 0-9 Number Button
Select a programme.
6 Recall
Return to previous viewing channel.
7 Info
Display the present screen information such as the current channel
and the input source.
8 Picture
Select a picture mode: User / Bright / Standard / Soft.
9 FAV
Display the Favourite Channel List.
10 Sound
Select a sound mode: User / Music / Standard / Speech.
11
Mute and restore your TV sound.
12 VOL
Adjust the volume.
13 CH
Select a channel.
14
Menu
Display the OSD (On Screen Display) setup menu.
15 EPG
Display the EPG (Electronic Programme Guide). (For digital TV
programmes in TV mode)
16
Allows you to navigate the OSD setup menu and adjust the system
settings to your preference.
OK / CH List
Confirm the selection in the OSD setup menu.
Display a list of channels saved in the TV tuner memory.
17 I/II
Switch between different audio languages:
MONO-NICAM STEREO / MONO-NICAM DUAL1 / NICAM DUAL2.
Only applicable when the TV programme has this feature. (For
analogue TV programmes in TV mode)
18 Still
To freeze a picture on screen.
19 Zoom
Allows you to watch the screens in various formats: Auto / 16:9 / 4:3
/ Zoom / Expand / Smart Zoom. (Dot to Dot for VGA,Component &
HDMI modes only)).
20 Exit
Exit the OSD (On Screen Display) setup menu.
Remote Control
Still
DMP Stop
Play/Pause
Lang.
Zoom
Exit
TV Source
1 2 3
4 5 6
7 8 9
0
Recall Info
CHVOL
FAV
Sound
Picture
Recall
Menu EPG
OK
CH List
Text Size Reveal Cancel
Hold
Sleep Subtitle Comp
Index
Sub.Code
Mix
1
2
5
6
8
9
11
12
14
18
17
16
3
4
7
10
13
15
19
20
GB-9
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
21 Lang.
Change the audio language or audio channel. (For
digital TV programmes with multiple audio language in
TV mode)
DMP
A short-cut to switch to DMP mode directly.
Play/Pause
Press to start playback or pause. (DMP mode)
Stop
Press to stop playback. (DMP mode)
22
Use to advance or reverse playback rapidly. (DMP mode)
Use to skip to the beginning of the previous or next
chapter / track / photo. (DMP mode)
23 Coloured buttons (RED / GREEN / YELLOW / BLUE)
Access TELETEXT items or Channel Edit when using
Digital / Freeview TV Channels. (TV / DTV / DMP mode)
24 Size
To enlarge the picture on the TV in teletext. (For
analogue TV programmes in TV mode)
25 Text
Turn on and off the Teletext function. (For analogue TV
programmes in TV mode)
26 Reveal
Reveal hidden information such as the answer to a quiz
in Teletext. (For analogue TV programmes in TV mode)
27 Cancel
To cancel the teletext mode completely. (For analogue
TV programmes in TV mode)
28 Sleep
Set the TV sleep timer: Off / 10 / 20 / 30 / ... / 60 / 90 /
120 min.
Hold
Freeze a multi-page passage on screen in Teletext. (For
analogue TV programmes in TV mode)
29 Subtitle
Display the subtitle which is broadcast with the
programme. (For digital TV programmes in TV mode)
Index
Press to select the page number of the Index from
teletext. (For analogue TV programmes in TV mode)
30 Sub.Code
Display the sub code bar.
31 Comp
A short-cut to switch to Component mode.
Mix
Select TELETEXT with a TV programme.
Still
DMP Stop
Play/Pause
Lang.
Zoom
Exit
TV Source
1 2 3
4 5 6
7 8 9
0
Recall Info
CHVOL
FAV
Sound
Picture
Recall
Menu EPG
OK
CH List
Text Size Reveal Cancel
Hold
Sleep Subtitle Comp
Index
Sub.Code
Mix
24
25
28
29
21
22
23
26
27
31
30
GB-10
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Making Video and Audio Connections
Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and
connection procedures.
When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are
complete.
Best Video
Performance
Signal Type
Separate audio
connection required
HDMI
(480i/480p/576i/576p/720p/1080i/1080p)
No
VGA
(648x480•60Hz/
800x600•60Hz/
1024x768•60Hz/
1920x1080•50Hz60Hz)
Yes
Component Video
(480i/480p/576i/576p/720p/1080i/1080p)
Yes
SCART (RGB input / AV IN/OUT) No
Composite Video
Yes
Connections
Connecting an AV Device with a HDMI Cable
This TV can accept High-Definition Multimedia Interface (HDMI) and supports HDCP (High-Bandwidth Digital Content •
Protection) Protocol.
This TV has a total of 3 HDMI input sockets, please make sure the correct input source is selected corresponding to your •
connected HDMI input socket.
When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to •
the HDMI function and the TV will automatically detect the resolution used by the HDMI source.
To get the best picture quality, adjust the blu-ray disc player, game console or set top box output resolution up to 1920 x •
1080p.
Blu-ray Player / DVD Player /
Recorder
Set-top BoxGame Console
HDMI Cable
(not included)
Use a HDMI cable to connect the TV’s HDMI input socket (HDMI1-3) to an external AV device’s HDMI output socket. 1.
Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the3.
button on the TV or on the remote control to turn on your TV.
Press the 4. Source button to display the input source list. Use the
buttons to select HDMI1 / HDMI2 / HDMI3
corresponding to your connected HDMI input socket and then press the OK button or the
button to confirm.
Although this TV is able to connect to HDMI devices, it is possible that some devices may not operate correctly.
GB-11
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Connecting a Computer with a VGA Cable
Use a VGA cable to connect the TV’s VGA input socket to a computer’s VGA output socket. Use an audio cable to connect the 1.
TV's PC AUDIO input socket to the computer’s audio output socket.
Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the3.
button on the TV or on the remote control to turn on your TV.
Press the 4. Source button to display the input source list. Use the
buttons to select VGA and then press the OK button or
the
button to confirm.
VGA Cable
(not included)
Audio Cable
(not included)
Computer
Connecting an AV Device with a Component (YPbPr) Cable
Connect the included component adapter cable and a component cable to the TV’s YPbPr input socket to an external AV 1.
device’s component output sockets.
Connect the included audio adapter cable and an AV cable to the TV’s AUDIO(L/R) input socket to the external AV device’s 2.
component audio sockets. (Audio Left = white, and Audio Right = red)
Component port on the TV Y Pb Pr
Video output ports on DVD
player
Y Pb Pr
Y Cb Cr
Plug the connected devices into the mains socket before switching on the 3. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the4.
button on the TV or on the remote control to turn on your TV.
Press the 5. Source button to display the input source list. Use the
buttons to select Component and then press the OK
button or the
button to confirm.
Satellite Receiver
AV Cable (not included)
Component Cable
(not included)
Audio Adapter
Cable
(included)
Component
Adapter Cable
(included)
Video Camera
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Game Console
Yellow (VIDEO)Yellow (VIDEO)
Red (R)
Blue (Pb/Cb)
Red (Pr/Cr)
Y
Y
Pb/Cb
Pb/Cb
Pr/Cr
Pr/Cr
Red (R) Red (R)
White (L)
Green (Y)
White (L) White (L)
Pb
Pr
COMPONENT
OUT
L
Y
R
If VGA mode is selected while there's no VGA input signal, the TV will automatically switch to standby mode
in 15 minutes.
GB-12
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Connecting an AV Device with a SCART Adapter Cable
Connect the included 1. SCART adapter cable to the TV's SCART input socket. Connect the other end of SCART adapter cable to
a SCART cable.
Connect the 2. SCART cable to an external AV device's SCART output socket.
Plug the connected devices into the mains socket before switching on the 3. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the4.
button on the TV or on the remote control to turn on your TV.
The TV will change the input source to 5. SCART automatically once the AV device is switched on.
Connecting an AV Device with a Composite Cable
Connect the included component adapter cable to the TV's YPbPr input socket. Connect the Video (yellow) end of an AV cable 1.
to the Y (green) end of the component adapter cable.
Connect the included audio adapter cable to the TV's AUDIO (L/R) input socket. Connect the AUDIO L (white) and AUDIO R 2.
(red) ends of the AV cable to the audio adapter cable.
Connect the AV cable to the audio / video sockets of the external AV device.3.
Plug the connected devices into the mains socket before switching on the 4. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the5.
button on the TV or on the remote control to turn on your TV.
Press the 6. Source button to display the input source list. Use the
buttons to select AV and then press the OK button or
the
button to confirm.
Connecting an Audio Receiver with an Optical Cable
Use an optical cable to connect the TV’s OPTICAL output socket to an audio receiver’s OPTICAL input socket. 1.
Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the3.
button on the TV or on the remote control to turn on your TV.
Select the audio receiver's input to OPTICAL. The TV sound will output from the audio receiver.4.
Satellite Receiver
AV Cable (not included)
Audio
Adapter Cable
(included)
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Game Console
Yellow (VIDEO)
Yellow (VIDEO)
Red (R) Red (R) Red (R)
White (L) White (L) White (L)
Component
Adapter Cable
(included)
Blue (Pb/Cb)
Red (Pr/Cr)
Green (Y)
Optical Cable
(not included)
Audio Receiver
Satellite Receiver
VCR
DVD Player / Recorder
Set-top Box
SCART Adapter Cable
(included)
SCART
Cable (not
included)
GB-13
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Connecting Earphones
Earphones Cable
(not included)
Connect your earphones to the TV's
HEADPHONE socket.
Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a
comfortable listening level.
Listening to loud sounds for prolonged periods of time may permanently damage your hearing.
Connecting the Aerial
Connect one end of the RF coaxial cable to the aerial socket on the
wall and the other end of the cable to the ANT socket on the right
rear side of your TV.
Do not connect the TV to the mains supply until you have
completed all the connections.
OR
RF coaxial cable
(not included)
Connecting a USB Storage Device
USB Cable
(not included)
AdapterPortable
Hard Disk
USB
Switch off the TV before connecting any USB storage device.1.
Connect your USB storage device to the USB port of your TV.2.
Plug the connected devices into the mains socket before switching on the 3. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the4.
button on the TV or on the remote control to turn on your TV.
Press the 5. Source button to display the input source list. Press the
buttons to select DMP and then press the OK button or
the
button to confirm. You can enjoy playing your video clips, photos and MP3 tracks in this mode. (refer to pages 35-37 for
details.)
• If a hard disk is used, make sure its mains adapter is connected to the mains supply.
The maximum supported storage space of the hard disk is 1 TB.•
Disconnect the USB storage device if it is not in use.•
The TV may take a few seconds to read the content in your USB storage device.•
GB-14
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Press the 6. buttons and then press the OK button to select
your desired language to be displayed on the menu. Press the
Menu button to return to the previous menu.
Press the 5.
buttons to highlight OSD Language and then
press the OK button or the
button to enter OSD Language
option.
Turning the TV On for the First Time
Connect the mains cable to the mains socket after you have 1.
completed all the connections.
Switch on the 2. I/O POWER ON/OFF switch at the bottom of the
TV. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
Touch the touch control panel of the TV once to activate it 3.
(indicator on the touch control panel will illuminate), and then
press the touch sensitive control
on the touch control panel or
press the
button on the remote control directly to turn the TV
on. The red LED indicator will flash for a few seconds.
Always disconnect the TV from the mains socket when not in use for a long period of time.
The
on the touch control panel or the button on the remote control is only used for switching the TV into
standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please
remove the mains plug from the mains socket or switch off the I/O POWER ON/OFF switch.
The first time you turn the TV on, it will go straight into the4.
Startup Menu. (If you have already installed the TV using the
Quick Start Guide, please go to the next step "Selecting the
Input Source" on page 16.)
Startup Menu
OSD Language English
Country UK
Use Mode Home Mode
Auto Install
: Exit
English
Startup Menu
OSD Language English
Country UK
Use Mode Home Mode
Auto Install
: Exit
I/O
To mains socket
LED indicator
GB-15
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Press the 10. buttons and then press the OK button to select the
mode setting.
Home Mode
Designed for home viewing.
(All user settings are saved after switching off the TV.)
Shop Mode
Designed for in shop viewing.
(Picture settings are not saved after switching off the TV.)
Select ‘Shop Mode’, your setting
will no be saved. Are you sure to
select Shop Mode?
Press the 11. OK button to confirm the setting or press the Menu
button to return to the previous menu.
Press the 9.
buttons to highlight Use Mode and then press the
OK button or the
button to enter Use Mode option.
Press the 7.
buttons to highlight Country and then press the
OK button or the
button to enter Country option.
Startup Menu
OSD Language English
Country UK
Use Mode Home Mode
Auto Install
: Exit
Startup Menu
OSD Language English
Country UK
Use Mode Home Mode
Auto Install
: Exit
Press the 8. buttons and then press the OK button to select the
country where you will operate the TV. Press the
Menu button
to return to the previous Startup menu.
GB-16
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Auto install will commence. This operation may take up to 5 13.
minutes. The display will show the progress of the tuning and
the number of channels found. After auto tuning is complete, the
first DTV channel tuned will be displayed on screen.
Selecting the Input Source
Press the 1. Source button to display the input source list.
Press the 2.
buttons to select the input source that you want: TV / AV /
Component / SCART / VGA / HDMI1 / HDMI2 / HDMI3 / DMP.
Press the 3. OK button to confirm your selection.
Alternative
Press the • TV button to switch the input source to TV mode directly.
Press the • DMP button to switch to DMP mode directly.
TV
AV
Component
SCART
VGA
Source
: Exit
VGA
HDMI 1
HDMI 2
HDMI 3
DMP
Source
: Exit
Press the 12. buttons to highlight Auto Install and then press
the OK button or the
button to confirm.
Startup Menu
OSD Language English
Country UK
Use Mode Home Mode
Auto Install
: Exit
GB-17
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Channel Selection
Press the • CH buttons on the remote control repeatedly or the 0-9
buttons to select a channel.
Alternative
Press the CH List button to display the Channel List. Press the
buttons to select a channel and then press the OK button to view the
selected channel.
If a blocked channel is selected, you must enter the password. Press
the OK button, the password screen will be displayed. Press the 0-9
buttons to enter the password, the channel will then be unlocked
(refer to page 27 for details on Channel Block).
Press the • Recall button to return to the previously viewed channel.
Presetting Favourite Channel List 1 / 2 / 3 / 4
Select the channel that you want to preset as your Favourite List.1.
Press the 2. FAV button to display the Favourite List and then press the RED
button to select between Favourite List 1 / 2 / 3 / 4. Press the GREEN
button to add the channel in the Favourite List. Press the GREEN button
again to delete the channel from the Favourite List.
Favourite List 1
FavList Add/Delete
: Exit
5 five
Channel List
5 five
15 Ch 15
16 800
17 UK Gold
25 TCM
23 bid-up.tv
27 800A
: Exit
ATV Channel
DTV Channel
A: ATV Channel
Favourite Channel Selection
To use the below functions, you need to preset your favourite channels. Press the FAV button to view the Favourite List. Press the
RED button to select between Favourite List 1 / 2 / 3 / 4 and then press the
buttons to highlight the channel. Press the OK
button to view the selected channel.
Display Channel Information
Press the • Info button to view the current information.
Volume Adjustment
Press the • VOL buttons on the remote control to adjust the volume.
If you wish to switch the sound off, press the •
button. Press the button again to resume audio listening.
You can also press the VOL
buttons on the remote control twice or press the VOL button on the touch panel 3 times
to resume audio listening.
GB-18
Preparation Connections Initial Setup Using the Features Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Customising the Picture Setting
Allows you to set your preferred picture mode.
Press the 1.
Menu button to display main menu. Press the buttons to
select the Picture menu and then press the OK button or the
button to
enter the Picture menu.
: Exit
Press the 2. buttons to select the following options. Press the buttons
to adjust the setting or press the OK button or the
button to enter the
option.
Brightness Increases or decreases the amount of white in the picture. (for Personal mode)
Contrast Adjusts the difference between light and dark levels in the picture. (for Personal mode)
Saturation Adjusts the richness of colour. (for Personal mode)
Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture.
Colour Temp. Adjusts the colour components independently to achieve a warm or cool effect.
Standard• : Remains natural tint unchange
Warm• : Increases red tint
Cool• : Increases blue tint
Enhanced Setting Adjusts the advanced video settings.
CTI
(Colour Transition
Improvement)
Improves the colour edge between contrasting colours on the image.
Flesh Tone When this feature is in the "On" state, the flesh tone can be more
natural.
Adaptive Luma
Control
When this feature is in the "On" state, the screen brightens and
contrast of the image increases.
Press the 3.
Menu button to return to the previous menu.
Press the 4. Exit button to exit the menu.
Using the Features
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/