Adam Equipment PT User manual

Adam Equipment

PTPLATFORMSET‐UP

ThankyouforpurchasingyourAdamEquipmentAEPTPlatforms.

TheScaleisasinglebasewithoneloadcellcableconnection.

1) Toremovethescalefromthepackaging,attatchtheeyebolts

suppliedandlifttheplatformusingasuitableliftingdevice,i.e.fork

truckorgantry.

2) Fitthe4feetsuppliedtotheunderneathoftheplatform.

Placetheplatformonthegroundensuringthattheplatformislevel

usingthe4feettoadjustandusingthebuilt‐inspiritlevelmakesure

thattheplatformisstableanddoesnotrock.

Takecaretomakesurethatthecableisnotrappedorpinchedandis

notcausingatriphazard.

Connecttheindicatorendofthecabletoyourindicatorandfollowthe

indicatorinstructions.