Dell G3 3779 User manual

Category
Notebooks
Type
User manual
Dell G3 17
Service Manual
Computer Model: Dell G3 3779
Regulatory Model: P35E
Regulatory Type: P35E003
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks
may be trademarks of their respective owners.
2018 - 05
Rev. A01
Contents
1 Before working inside your computer............................................................................................................. 9
Before you begin ............................................................................................................................................................... 9
Safety instructions............................................................................................................................................................. 9
Recommended tools.......................................................................................................................................................... 9
Screw list........................................................................................................................................................................... 10
2 After working inside your computer..............................................................................................................12
3 Removing the base cover............................................................................................................................. 13
Procedure.......................................................................................................................................................................... 13
4 Replacing the base cover............................................................................................................................. 16
Procedure ......................................................................................................................................................................... 16
5 Removing the battery...................................................................................................................................19
Prerequisites......................................................................................................................................................................19
Procedure.......................................................................................................................................................................... 19
6 Replacing the battery.................................................................................................................................. 20
Procedure ........................................................................................................................................................................ 20
Post-requisites..................................................................................................................................................................20
7 Removing the memory modules....................................................................................................................21
Prerequisites......................................................................................................................................................................21
Procedure.......................................................................................................................................................................... 21
8 Replacing the memory modules................................................................................................................... 22
Procedure .........................................................................................................................................................................22
Post-requisites..................................................................................................................................................................22
9 Removing the wireless card......................................................................................................................... 23
Prerequisites..................................................................................................................................................................... 23
Procedure..........................................................................................................................................................................23
10 Replacing the wireless card........................................................................................................................ 25
Procedure..........................................................................................................................................................................25
Post-requisites..................................................................................................................................................................25
11 Removing the coin-cell battery................................................................................................................... 26
Prerequisites..................................................................................................................................................................... 26
Procedure..........................................................................................................................................................................26
12 Replacing the coin-cell battery................................................................................................................... 27
Procedure..........................................................................................................................................................................27
Contents
3
Post-requisites..................................................................................................................................................................27
13 Removing the fan....................................................................................................................................... 28
Prerequisites..................................................................................................................................................................... 28
Procedure..........................................................................................................................................................................28
14 Replacing the fan....................................................................................................................................... 30
Procedure ........................................................................................................................................................................ 30
Post-requisites.................................................................................................................................................................. 31
15 Removing the processor fan.......................................................................................................................32
Prerequisites..................................................................................................................................................................... 32
Procedure..........................................................................................................................................................................32
16 Replacing the processor fan....................................................................................................................... 33
Procedure..........................................................................................................................................................................33
Post-requisites..................................................................................................................................................................33
17 Removing the solid-state drive/Intel Optane.............................................................................................. 34
Prerequisites..................................................................................................................................................................... 34
Procedure..........................................................................................................................................................................34
18 Replacing the solid-state drive/Intel Optane.............................................................................................. 35
Procedure ........................................................................................................................................................................ 35
Post-requisites..................................................................................................................................................................35
19 Removing the hard drive............................................................................................................................ 36
Prerequisites..................................................................................................................................................................... 36
Procedure..........................................................................................................................................................................36
20 Replacing the hard drive............................................................................................................................ 38
Procedure .........................................................................................................................................................................38
Post-requisites..................................................................................................................................................................39
21 Removing the touchpad............................................................................................................................. 40
Prerequisites..................................................................................................................................................................... 40
Procedure..........................................................................................................................................................................40
22 Replacing the touchpad..............................................................................................................................41
Procedure ......................................................................................................................................................................... 41
Post-requisites.................................................................................................................................................................. 41
23 Removing the power-adapter port............................................................................................................. 42
Prerequisites..................................................................................................................................................................... 42
Procedure..........................................................................................................................................................................42
24 Replacing the power-adapter port............................................................................................................. 43
Procedure .........................................................................................................................................................................43
4
Contents
Post-requisites..................................................................................................................................................................43
25 Removing the speakers..............................................................................................................................44
Prerequisites..................................................................................................................................................................... 44
Procedure..........................................................................................................................................................................44
26 Replacing the speakers..............................................................................................................................45
Procedure ........................................................................................................................................................................ 45
Post-requisites..................................................................................................................................................................45
27 Removing the heat sink..............................................................................................................................46
Prerequisites..................................................................................................................................................................... 46
Procedure..........................................................................................................................................................................46
28 Replacing the heat sink.............................................................................................................................. 47
Procedure .........................................................................................................................................................................47
Post-requisites..................................................................................................................................................................47
29 Removing the display assembly................................................................................................................. 48
Prerequisites..................................................................................................................................................................... 48
Procedure..........................................................................................................................................................................48
30 Replacing the display assembly.................................................................................................................. 51
Procedure ......................................................................................................................................................................... 51
Post-requisites..................................................................................................................................................................52
31 Removing the I/O board............................................................................................................................. 53
Prerequisites..................................................................................................................................................................... 53
Procedure..........................................................................................................................................................................53
32 Replacing the I/O board.............................................................................................................................54
Procedure ........................................................................................................................................................................ 54
Post-requisites..................................................................................................................................................................54
33 Removing the power-button board............................................................................................................ 55
Prerequisites.....................................................................................................................................................................55
Procedure......................................................................................................................................................................... 55
34 Replacing the power-button board.............................................................................................................57
Procedure .........................................................................................................................................................................57
Post-requisites................................................................................................................................................................. 58
35 Removing the system board...................................................................................................................... 59
Prerequisites..................................................................................................................................................................... 59
Procedure......................................................................................................................................................................... 59
36 Replacing the system board.......................................................................................................................62
Procedure ........................................................................................................................................................................ 62
Contents
5
Post-requisites..................................................................................................................................................................63
Entering the Service Tag in the BIOS setup program................................................................................................. 64
37 Removing the power button with ngerprint reader...................................................................................65
Prerequisites.....................................................................................................................................................................65
Procedure......................................................................................................................................................................... 65
38 Replacing the power button with ngerprint reader................................................................................... 67
Procedure .........................................................................................................................................................................67
Post-requisites..................................................................................................................................................................67
39 Removing the palm-rest and keyboard assembly....................................................................................... 69
Prerequisites..................................................................................................................................................................... 69
Procedure......................................................................................................................................................................... 69
40 Replacing the palm-rest and keyboard assembly........................................................................................70
Procedure .........................................................................................................................................................................70
Post-requisites..................................................................................................................................................................70
41 Removing the display bezel......................................................................................................................... 71
Prerequisites...................................................................................................................................................................... 71
Procedure.......................................................................................................................................................................... 71
42 Replacing the display bezel........................................................................................................................ 72
Procedure .........................................................................................................................................................................72
Post-requisites..................................................................................................................................................................72
43 Removing the camera................................................................................................................................ 73
Prerequisites..................................................................................................................................................................... 73
Procedure..........................................................................................................................................................................73
44 Replacing the camera.................................................................................................................................74
Procedure .........................................................................................................................................................................74
Post-requisites..................................................................................................................................................................74
45 Removing the display panel........................................................................................................................75
Prerequisites..................................................................................................................................................................... 75
Procedure..........................................................................................................................................................................75
46 Replacing the display panel........................................................................................................................ 77
Procedure .........................................................................................................................................................................77
Post-requisites..................................................................................................................................................................78
47 Removing the display hinges...................................................................................................................... 79
Prerequisites..................................................................................................................................................................... 79
Procedure..........................................................................................................................................................................79
48 Replacing the display hinges......................................................................................................................80
6
Contents
Procedure ........................................................................................................................................................................ 80
Post-requisites................................................................................................................................................................. 80
49 Removing the display cable........................................................................................................................ 81
Prerequisites...................................................................................................................................................................... 81
Procedure.......................................................................................................................................................................... 81
50 Replacing the display cable........................................................................................................................82
Procedure .........................................................................................................................................................................82
Post-requisites..................................................................................................................................................................82
51 Removing the display back-cover and antenna assembly............................................................................83
Prerequisites..................................................................................................................................................................... 83
Procedure..........................................................................................................................................................................83
52 Replacing the display back-cover and antenna assembly........................................................................... 84
Procedure .........................................................................................................................................................................84
Post-requisites..................................................................................................................................................................84
53 Downloading drivers.................................................................................................................................. 85
Downloading the audio driver.........................................................................................................................................85
Downloading the graphics driver................................................................................................................................... 85
Downloading the USB 3.0 driver....................................................................................................................................85
Downloading the Wi-Fi driver.........................................................................................................................................86
Downloading the media-card reader driver.................................................................................................................. 86
Downloading the chipset driver..................................................................................................................................... 86
Downloading the network driver....................................................................................................................................86
54 System setup.............................................................................................................................................88
Boot Sequence.................................................................................................................................................................88
Navigation keys................................................................................................................................................................ 88
BIOS overview..................................................................................................................................................................89
Entering BIOS setup program........................................................................................................................................ 89
Enabling or disabling the USB in BIOS setup program..........................................................................................89
Identifying the hard drive in BIOS setup program..................................................................................................89
Checking the system memory in BIOS setup program......................................................................................... 89
System setup options......................................................................................................................................................89
55 System and setup password...................................................................................................................... 95
Assigning a system password and setup password.....................................................................................................95
Deleting or changing an existing system setup password.......................................................................................... 95
Clearing CMOS settings................................................................................................................................................. 96
Clearing forgotten passwords........................................................................................................................................ 96
56 Troubleshooting......................................................................................................................................... 97
Flashing the BIOS.............................................................................................................................................................97
Flashing BIOS (USB key).................................................................................................................................................97
Intel Optane memory (Optional).....................................................................................................................................97
Contents
7
Enabling Intel Optane memory................................................................................................................................. 97
Disabling Intel Optane memory................................................................................................................................ 98
Reinstall Windows using a USB recovery drive............................................................................................................98
Enhanced Pre-Boot System Assessment (ePSA) diagnostics...................................................................................98
Running the ePSA diagnostics.................................................................................................................................99
System diagnostic lights................................................................................................................................................. 99
Wi-Fi power cycle...........................................................................................................................................................100
Flea power release..........................................................................................................................................................100
57 Getting help and contacting Dell...............................................................................................................102
Self-help resources.........................................................................................................................................................102
Contacting Dell............................................................................................................................................................... 102
8 Contents
Before working inside your computer
NOTE: The images in this document may dier from your computer depending on the conguration you ordered.
Before you begin
1 Save and close all open les and exit all open applications.
2 Shut down your computer. Click Start > Power > Shut down.
NOTE: If you are using a dierent operating system, see the documentation of your operating system for shut-down
instructions.
3 Disconnect your computer and all attached devices from their electrical outlets.
4 Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
5 Remove any media card and optical disc from your computer, if applicable.
Safety instructions
Use the following safety guidelines to protect your computer from potential damage and ensure your personal safety.
WARNING
: Before working inside your computer, read the safety information that shipped with your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
WARNING: Disconnect all power sources before opening the computer cover or panels. After you nish working inside the
computer, replace all covers, panels, and screws before connecting to the electrical outlet.
CAUTION: To avoid damaging the computer, ensure that the work surface is at and clean.
CAUTION: To avoid damaging the components and cards, handle them by their edges, and avoid touching pins and contacts.
CAUTION: You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped
with the product or at www.dell.com/regulatory_compliance.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the
metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity,
which could harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have
connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When disconnecting
cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and
connectors are correctly oriented and aligned.
CAUTION: Press and eject any installed card from the media-card reader.
Recommended tools
The procedures in this document may require the following tools:
Phillips screwdriver #1
Plastic scribe
1
Before working inside your computer 9
Screw list
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Base cover Palm rest and keyboard
assembly
M2.5x7 10
Battery Palm rest and keyboard
assembly
M2x3 5
Display panel Display back-cover and
antenna assembly
M2x3 4
Fan Palm rest and keyboard
assembly
M2.5x5 2
Processor fan Palm rest and keyboard
assembly
M2.5x5 2
Hard-drive assembly Palm rest and keyboard
assembly
M2x3 4
Hard-drive bracket Hard drive M3x3 4
Heat sink System board M2x3 4
NOTE: Applicable only for computers shipped
with discrete conguration.
Hinges Palm rest and keyboard
assembly
M2.5x5 6
Hinge brackets Display back-cover and
antenna assembly
M2.5x4 8
Hinge brackets Display back-cover and
antenna assembly
M2x3 2
I/O board Palm rest and keyboard
assembly
M2.5x2.5 2
Power-adapter port Palm rest and keyboard
assembly
M2x2 1
Power-button board Palm rest and keyboard
assembly
M2x2 1
Power button with
ngerprint reader
(optional)
Palm rest and keyboard
assembly
M2x2 1
Solid-state drive Palm rest and keyboard
assembly
M2x3 1
System board Palm rest and keyboard
assembly
M2.5x2.5 4
10 Before working inside your computer
Component Secured to Screw type Quantity Screw image
Touchpad Touchpad and palm rest M2x2 4
Wireless-card bracket System board M2x3 1
Before working inside your computer 11
After working inside your computer
CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer.
1 Replace all screws and ensure that no stray screws remain inside your computer.
2 Connect any external devices, peripherals, or cables you removed before working on your computer.
3 Replace any media cards, discs, or any other parts that you removed before working on your computer.
4 Connect your computer and all attached devices to their electrical outlets.
5 Turn on your computer.
2
12 After working inside your computer
Removing the base cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Remove the 10 screws (M2.5x7) that secure the base cover to the palm rest and keyboard assembly.
2 Loosen the two captive screws (M2.5) on the base cover.
3
Pry the base cover starting from the left hinge.
4 Continue prying the base cover from the bottom of the computer base.
3
Removing the base cover 13
5 Pry the base cover from the right side and lift it o the palm rest and keyboard assembly.
NOTE: The following steps are applicable only if you want to further remove any other component from your computer.
6 Peel the tape that secures the battery cable to the system board.
7 Disconnect the battery cable from the system board.
14
Removing the base cover
8 Press and hold the power button for 5 seconds to ground the computer and drain the ea power.
Removing the base cover 15
Replacing the base cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Connect the battery cable to the system board, if applicable.
2 Adhere the tape that secures the battery cable to the system board.
CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the power-adapter
port when you snap the base cover to the computer base.
3 Place the base cover on the palm rest and keyboard assembly, and snap the base cover into place starting from the power-adapter
port.
4
16 Replacing the base cover
4 Align the tabs on the base cover with the slots on the palm-rest assembly and snap it into place.
5 Tighten the two captive screws (M2.5) that secure the base cover to the palm rest and keyboard assembly.
6 Replace the 10 screws (M2.5x7) that secure the base cover to the palm rest and keyboard assembly.
Replacing the base cover
17
18 Replacing the base cover
Removing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Remove the ve screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
2 Lift the battery o the palm rest and keyboard assembly.
5
Removing the battery 19
Replacing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the battery with the screw holes on the palm rest and keyboard assembly.
2 Replace the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
Post-requisites
Replace the base cover.
6
20 Replacing the battery
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102

Dell G3 3779 User manual

Category
Notebooks
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI