ADTRAN TOTAL ACCESS 4303 Job Aid

Type
Job Aid
TOTAL ACCESS
®
4303 BACKPLANE AND CHASSIS
4303 CHASSIS
CLEI: SLM2MS0F_ _
61200330L2-22B
0212
C A U T I O N C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
POWER CONNECTION - A
System accommodates redundant power configurations. Includes dual terminals for
-48V and -48V Return. System operates with one or both supplies functioning.
CHASSIS GROUND - B
System provides a copper terminal block.
TIMING INPUT - C
System operates in local, loop, or external timing modes. For external timing modes,
the unit provides wire-wrap pins for separate DS1 (1.544 MHz) clocks.
BNC I/O MODULES - D
These modules (P/N 1200323L1) provide BNC connections for applications such as
DS3 and STS-1.
CHAMP CONNECTORS - E
The 64-pin Champ connectors are used to deliver tips and rings from the DSX option
modules. The four connectors across the top are for the transmit pairs and the
connectors across the bottom are for the receive pairs.
Caution: Champ connectors should only be connected to intra-building wiring and
circuits.
JOBAID
#61200330L2-22B#
NETWORK MANAGEMENT - F
Provides support for future TL1 access.
ADMIN PORT - G
Provides support for VT100 or external modem access of the Total Access 4303
menus.
ETHERNET 10/100 BASET - H
Provide external inputs on contact closure or -48V input. Inputs include ACO,
Remote, Aux1, and Aux2. See the SCU Manual (61200330L2-1) for more details.
Caution: 10/100BASET connections should only be connected to intra-building
wiring and circuits.
ALARM RELAY OUTPUTS - I
Provide normally open or normally closed contacts for audible (x3), visual (x3), and
auxiliary (x2) alarms.
EXTERNAL INPUTS - J
Provide external inputs on contact closure or -48V input. Inputs include ACO,
Remote, Aux1, and Aux2. See the SCU Manual (61200330L2-1) for more details.
TOTAL ACCESS
®
4303 DC CHASSIS
PRICING AND AVAILABILITY 800.827.0807
TECHNICAL SUPPORT 800.726.8663
RETURN FOR REPAIR 256.963.8722
www.adtran.com
61200330L2-22B
TOTAL ACCESS 4303 CHASSIS
With 2 DC Power Supplies, 2 SCUs, and 16 Option Modules Installed
SPECIFICATIONS
Specifications
Power Supply Slots 2 (PS-A and PS-B)
SCU Slots 2 (SCU-A and SCU-B)
Option Module Slots 16 (1-16)
Dimensions 17.5 in. W x 7 in. H x 12 in. D
4 rack units (4u) high
Rackmount Mounts in 19 in. or 23 in. rack
Weight Individual chassis: 11 lbs.
Fully loaded shelf: 23 lbs.
Power Dissipation 350 watts maximum, fully equipped
Input Voltage -42 to -54 VDC
Compliance FCC Part 15, UL 60950, NEBS Level 3
Warranty 10 years
COMPLIANCE
The Total Access 4303 chassis is NRTL listed to the applicable UL standards.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by ADTRAN could void the users authority to operate
this equipment.
AVAILABLE TOTAL ACCESS 4303 ITEMS
Part Number Description
4200330L1 One chassis, two DC power supplies, two SCUs, one Octal DSX-1,
and 15 blank panels
1200330L2 Total Access 4303 Chassis
1200332L1 Total Access 4303 Octal DSX-1 Module
1202332L1 Total Access 4303 Octal DSX-1 Module with ISDN
1200333L1 Total Access 4303 DS3 Module
1200323L1 Total Access 4303 BNC I/O Module
1200334L1 Total Access 4303 System Controller Unit (SCU)
1200335L1 Total Access 4303 DC Power Supply
1200352L1 Total Access 4303 STS-1 Module
4200339L1 One power supply slot blank panel, 14 option slot blank panels
WARRANTY
ADTRAN will replace or repair this product within the warranty period if it does not meet its
published specifications or fails while in service. Warranty information can be found at
www.adtran.com/warranty. U.S. and Canada customer Faxback: 877-457-5007,
Document 414.
Code Input Output
Power Code (PC) F C
Telecommunication Code (TC)
Installation Code (IC) B
For a complete Installation and Maintenance Practice (P/N 61200330L2-5) :
877-457-5007, Faxback Document 859. Please have your fax number ready.
Caution: Per “GR-1089-CORE October 2002, Section 9,
the Total Access 4303 system is designed and
intended only for installation in a DC-C
(common) bonding and grounding system. The
chassis ground wire must be of equal or greater
ampacity than the wire connected to the
48 VDC return.
The Total Access 4303 system is not intended or
designed for installation in a DC-I (isolated)
bonding and grounding system.
  • Page 1 1
  • Page 2 2

ADTRAN TOTAL ACCESS 4303 Job Aid

Type
Job Aid

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI