KidTrax KT1006 User manual

User Guide

Questions? Comments?

Missing Parts? Contact us:

www.kidtraxtoys.com

In U.S.A.:

Pacific Cycle Inc.

4902 Hammersley Road,

Madison,

WI 53711, USA.

Phone: (877) 741-6154

Styles and colors may vary.

Made in CHINA to Pacific Cycle Inc.

quality specifications.

4358-4045 05/17/06

Corvette® design is a registered trademark

of Chevrolet® and is used under license.

©Chevrolet®2004

Adult Assembly

Required

Race Car

Model KT1006/KT1007/KT1008

Spanish User Guide included.

Guía del usuario en español incluida.

•DO NOT return this product to the place of purchase.

•Lay out and identify all parts before assembly. If any parts are missing, call Pacific Cycle

Inc. Consumer Relations at (877) 741-6154, or visit our web site at

www.kidtraxtoys.com.

•Include the model number and manufacture date, found underneath the Seats

and a brief description of the part.

•If your Corvette Race Car needs service or repairs, call Pacific Cycle Inc. Consumer

Relations at (877) 741-6154 for an authorized service center.

•Kid Trax may need to contact you. Please complete and return the Registration

Card today.

Service and Repairs

Thank you for purchasing the Kid Trax Corvette Race Car. Kid Trax wants your child to

enjoy this product for years to come. Keep these points in mind as you read this guide:

•Corvette Race Car is recommended for children 3 and up. Maximum combined

weight is 130 lbs. (59 kg).

•ADULT SUPERVISION REQUIRED!

•Battery must be charged prior to first use (see pages 3-4).

•All parts must be assembled properly (see pages 5-12).

•Batteries must be installed properly in the radio (see page 7).

•Children must follow safety rules for riding (see page 14).

•Read and explain operating instructions to your child (see pages 15-17).

•ADULTS ONLY: Recharge battery according to directions (see pages 3-4) and

maintain battery (see page 19).

About Your New Corvette Race Car

FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND

ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE

REFERENCE.

•ADULT ASSEMBLY REQUIRED. The product contains small parts, which are

for adult assembly ONLY. Keep small children away when assembling.

•ALWAYS remove protective material and poly bags and dispose before

assembly.

WARNING

•

Park the Corvette indoors or cover it with a tarp to protect it from wet weather.

DO NOT

leave vehicle in sun for long periods of time or fading may occur. Store in

shade or cover with tarp.

•DO NOT

drive the Corvette in loose dirt, sand or fine gravel, which could damage

moving parts, motors or the electrical system, which could void the warranty.

•DO NOT

wash the Corvette with a hose.

DO NOT

wash the Corvette with soap and

water.

DO NOT

drive the Corvette in rainy or snowy weather. Water will damage

the motor, electrical system and battery.

CAUTION

Parts List

Tools and batteries

needed for assembly:

•Phillips screwdriver

•3AA alkaline batteries

(for radio)

Vehicle Body

2Mirrors (left and right)

Windshield

Dashboard Assembly

Steering Wheel

2Seats

Spoiler

Nut Wrench

Charger

2Large Washers

2Front Wheels (marked “FRONT”)

2Rear Wheels (marked “REAR”)

4Wheel Covers

4Small Washers

4Nuts

6hardware bags labeled A, B, C, D, E, and F.

NOTE: Leave hardware in bags until it is

called for in the assembly procedure.

C D E F G

Charge 12-Volt Battery Prior To First Use

YOU MUSTCHARGE THE 12-VOLTBATTERYFOR A “FULL”24 HOURS PRIOR

TOASSEMBLY. FAILURE TO CHARGE THE BATTERY AS DIRECTED WILL CAUSE

PERMANENT DAMAGE TO THE BATTERY AND VOID YOUR WARRANTY.

AFTER EACH USE, OR ONCE A MONTH MINIMUM, CHARGE THE BATTERY

FOR A “FULL” 16 HOURS. DO NOT LEAVE THE BATTERY ON THE CHARGER

FOR MORE THAN 30 HOURS. READ THE FOLLOWING WARNINGS BEFORE

CHARGING THE BATTERY.

•PREVENT FIRE AND ELECTRIC SHOCK:

Use ONLY batteryand charger provided by manufacturer. Use of

the wrong type of battery for charger could cause a fire or

explosion.

-DO NOT use the battery or charger for any other product. Overheating,

fire or explosion could occur.

NEVER modify the electric circuit system. Alterations could cause

ashock, fire or explosion.

-DO NOT allow any type of liquid on the battery or its components.

-Explosive gases arecreated during charging. DO NOT charge near heat

or flammable materials. Charge in a well-ventilated area ONLY.

-Charge the battery in a dry area ONLY.

•DO NOT open the battery. Battery contains lead acid and other materials

that are toxic and corrosive.

•DO NOT open the charger. Exposed wiring and circuitry inside case may

cause electric shock.

•ONLY ADULTS may handle or charge the battery. NEVER allow child to

handle or charge the battery.Batteryis heavy and contains lead acid

(electrolyte).

•DO NOT drop the battery. Permanent damage to the battery could occur

or cause serious injury.

•Before charging the battery, check for wear or damage to the battery,

charger and the connectors. DO NOT charge the battery if any damage to

parts has occurred. Replace with manufacturer’s parts ONLY.

•DO NOT allow the battery to drain completely. Recharge the battery after

each use or once a month if not used regularly.

•DO NOT charge battery upside down.

•ALWAYS secure the battery with the bracket. Battery can fall out and

injure a child if vehicle tips over.

WARNING

ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY.

See page 19 for battery maintenance and page 21 for recycling information.

NOTE: It is not necessary to remove the battery from the vehicle for charging.

However, if the adapter cord will not safely reach a 120-volt wall outlet, the battery

can be removed for charging (see page 20).

Plug the charger into a standard 120-volt wall

outlet. Light on charger will glow RED.

The charger may feel warm during charging.

This is normal and not a cause for concern.

3.P

lug the charger connector into

the battery.

Use ONLY the Kid Trax 12-volt

charger included with the Corvette

(Input: AC120V–, 0.5A, 60Hz

Output: +15VDC, 1.5A).

NOTE:

No metal contact

intended to be in this area.

Correct as shown.

Disconnect Charger from 12-Volt Battery

•

Unplug the charger from the wall outlet.

•

Unplug the charger from the 12-volt battery.

•

Plug the battery connector into the battery.

•Lower the hood completely.

Connect Charger to 12-Volt Battery

1.Open the hood.

2.Locate 12-volt battery.

Unplug the

battery connector from the

battery.

Charge 12-Volt Battery Prior To First Use

- +

Assemble the Corvette Race Car

1.Slide a large washer onto the axle.

NOTE: Washer may already be on

the axle.

Locate a wheel marked “FRONT”.

Slide a wheel onto the axle with

“FRONT” facing toward vehicle.

Then slide a wheel cover onto the

axle, fitting the three locating pins

into the holes.

2.Slide a small washer onto the axle.

Attach a nut onto the axle and

tighten snugly with the nut wrench

until you can see about two threads

on the axle. Do not overtighten.

Repeat steps 1 and 2

to attach the other

front wheel.

Attach Front Wheels

Assemble the Corvette Race Car

1.Locate a wheel marked “REAR”.

Slide a wheel onto the axle with

“REAR” facing toward vehicle. Fit

the wheel into the gear box.

NOTE: For the rear wheels, a large

washer is NOT needed before sliding

awheel onto the axle.

Then slide a wheel cover onto the

axle, fitting the three locating pins

into the holes.

2.Slide a small washer onto the axle.

Attach a nut onto the axle and

tighten snugly with the nut wrench

until you can see about two threads

on the axle. Do not overtighten.

Repeat steps 1 and 2

to attach the other

rear wheel.

Attach Rear Wheels

Assemble the Corvette Race Car

1. ONLY AN ADULT MAY INSTALL

THE BATTERIES. Locate the

battery compartment under the

radio. Remove the faceplate by

turning both knobs counter-

clockwise until it comes off.

Set aside.

Install AA Batteries for FM Radio

3.Insert three (3) AA alkaline batteries

(not included).

Reattach the battery cover with the

screw. Do not overtighten. Reattach

the faceplate by turning both knobs

clockwise.

2.Use a Phillips screwdriver to remove

the screw on the battery cover. Open

the battery cover.

• DO NOT mix old and new batteries.

• DO NOT mix alkaline, standard (carbon-zinc), or rechargeable

(nickel-cadmium) batteries.

WARNING

NOTE: See page 18 for instructions about using the radio.

Assemble the Corvette Race Car

1. Install Dash:

Lower dash into slots

on vehicle and guide

steering column into

steering hole in dash

and out the front of the

dash as shown.

Brackets should be

inserted completely

into slots.

Install Dashboard Assembly

2.Install Steering Wheel:

Hold the steering wheel

near front of dash with

the logo oriented right

side up. Guide the

steering wheel cable

into the steering

column hole. Align the

steering wheel holes

with the holes on the

steering shaft.

Install Steering Wheel

3. Connect to Steering

Wheel Shaft:

Locate hardware bag

labeled “C” (Figure 3).

Insert screw into

steering column and

tighten nut securely. Do

not overtighten.

Align

Holes

Cable

Assemble the Corvette Race Car

4. Connect two sets of

Cables:

Locate the steering

wheel cable and the

main wire harness

cable. Fasten connector

ends securely.

NOTE: If the

connectors don’t fit

easily,flip one over and

try again.

6. ToInstall Mirrors:

Press left and right

mirror into holes on

body.

TIP: Turn mirrors

inward so that they will

be out of the way

during the next step.

5.Guide the five tabs on

the windshield into

the holes on the body.

Press windshield

down firmly.

Install Windshield

Install Mirrors

Assemble the Corvette Race Car

Install Hardware

9.Dashboard: Locate

hardware bag labeled

“A”. Locatethe four

holes to secure the dash.

Use a large washer

followed by a

lockwasher and

machine screw to

secure the dashboard

(Figure 9).

DO NOT USE

POWER DRILL.

Do not overtighten

hardware.

8.Turn vehicle on its side.

Tip: It may be helpful if a

second person holds the

vehicle as shown during

the next step.

2Holes

7.While the vehicle is still on its

side, locate the four holes in the

rear of the vehicle body.

Lower the spoiler posts down

into the four holes. Press down

firmly.

Install Spoiler

Assemble the Corvette

10. Windshield: Locate hardware bag labeled “B”. Locate the six holes to secure

the windshield. Use six self-tapping screws to secure the windshield (Figure 10).

DO NOT USE POWER DRILL. Do not overtighten hardware.

Problem: my

photo is at an

angle and

doesn’t show

both sides.

Windshield (6)

Install Hardware (continued)

Problem: my

photo is at an

angle and

doesn’t show

both sides.

Mirrors (2)

11. Mirrors: Locate hardware bag labeled “D”. Locate the two holes to secure the

mirrors. Use one self-tapping screw to secure each mirror (Figure 11).

DO NOT USE POWER DRILL. Do not overtighten hardware.

13.Locate the hook behind the seat.

Lower the seat down into the

vehicle. Rock the seat backward to

insert the hook into the slot in the

vehicle. Push bottom of seat

toward the back of the

vehicle.

14.Locate hardware bag labeled “E”.

Using a Phillips screwdriver, insert a

self-tapping screw in the hole at the

front of the seat. Do not overtighten.

Repeat steps 13-14 to install the

other seat.

Install Seats

12. Spoiler: Locate hardware

bag labeled “F”. Locate

the four holes to secure

the spoiler. Insert four

self-tapping screws in the

holes and up through the

four posts in the spoiler.

Tighten with a Phillips

screwdriver.

DO NOT USE POWER

DRILL. Do not

overtighten hardware.

Assemble the Corvette

2Holes

Using the Corvette Race Car

•The Kid Trax Corvette Race Car is for children age 3 and up.

•Maximum combined weight is 130 lbs. (59 kg). DO NOT overload the Corvette

Race Car. DO NOT tow anything behind the Corvette Race Car. Damage to the

motor or gears could occur, which could void the warranty.

Adult Supervision Required!

PREVENT INJURIES AND DEATHS:

•NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when child is in

vehicle. Direct adult supervision is REQUIRED.

•NEVER use in roadways, near cars, on or near steep inclines or steps, swimming

pools or other bodies of water.

•ALWAYS wear shoes.

•ALWAYS sit on the seat.

•NEVER allow more than two (2) riders in the Corvette Race Car.

WARNING

•Your child will enjoy many happy hours riding the kid Trax Corvette Race Car. You,

as the responsible adult, MUST supervise your child riding in the Corvette Race Car!

•Your young child’s judgment skills are still developing, and they may be tempted to

drive the Corvette Race Car into unsafe areas or in an unsafe manner. ALWAYS watch

to see where your child is going, and that they handle the vehicle safely.

•Read the “Rules for Safe Riding” (page 14) out loud to your child and their

playmates, and INSIST they follow the rules.

•Point out all the parts of the dashboard, the foot pedal and the shifter to your child.

Use the diagrams on pages 15 and 16 to find the parts on the Corvette.

•Show your child how to safely operate the Corvette (pages 17 and 18).

•To prevent unsupervised riding in the Corvette, disconnect or remove the battery

(see pages 20 and 21).

Rules for Safe Riding

READ THESE RULES ALOUD TO YOUR CHILD AND THEIR PLAYMATES AND

MAKE SURE THEY UNDERSTAND THEM!

•ALWAYS DRIVE THE CORVETTE RACE CAR WITH AN ADULT WATCHING.

•Riders must be 3 years of age or older.

•ALWAYS sit in the seat.

•ALWAYS wear shoes.

•

ONLY one or two riders in the Corvette Race Car. If more children ride on the hood

or the trunk, they may fall off, block the driver’s view or cause the Corvette Race Car to

tip over. Serious injury could occur! Also, the Corvette Race Car may be overloaded,

which could damage the motor or gears (weight maximum of 130 lbs. [59 kg]).

•DO NOT drive near full-sized, motorized vehicles. It is DANGEROUS to drive the

Corvette Race Car on driveways, streets or alleys that are used by full-sized motorized

vehicles. The Corvette Race Car is small and may be out of sight to the driver of a full-

sized car.

•DRIVE ONLY ON LEVEL GROUND! The Corvette Race Car will operate best on

concrete or other firm surfaces.

•NEVER drive near water! DO NOT drive toward a swimming pool, creeks or a pond!

Drowning could occur.

•DO NOT drive DOWN a steep slope. The Corvette Race Car may go too fast,

causing it to tip over or slip.

•DO NOT drive UP a steep slope. The motor may stop and the Corvette Race Car

could roll backward and go too fast, causing it to tip over.

•DO NOT drive near drop-offs, such as steps or decks. The Corvette Race Car could

tip over.

•Keep hands, hair and clothes AWAY from moving parts, such as the wheels or the

motor.Serious injurycould occur.

•DO NOT drivenear flammable vapors, such as gasoline, paint thinner or liquid

wax that are usually stored in the garage. The CorvetteRace Car’s electric switch will

spark when first turned on or when turned off and could cause an explosion or fire!

Keep flammable products tightly sealed and stored away from the CorvetteRace Car.

•DO NOT drive the Corvette Race Car in rainy or snowy weather. Water will damage

the motor,electrical system and battery. Poor traction may cause the Corvette Race

Car to slip or the wheels to spin, which could cause the power to shut down (see

thermal fuse information in Battery Maintenance, page 19).

•DO NOT drive the Corvette Race Car in loose dirt, mud, sand or fine gravel, which

can damage moving parts, motors or the electrical system. Poor traction could cause

the Corvette Race Car to slip or the wheels to spin, which could cause the power to

shut down (see thermal fuse information in Battery Maintenance, page 19).

•

DO NOT play the radio too loudly, because it may distract the driver.

•Only experienced drivers may use “High” speed (5 mph).

The Corvette Race Car

might go too fast for beginners.

Power switch

Turn the power switch to the right. You

will hear an “ignition” sound then an

“engine running” sound which stays on

until the power switch is turned off.

The power switch must be turned on

in order to drive the Corvette Race Car

and for the lights and extra

sounds to function.

Burn-out button and

Right turn signal

To hear the Corvette Race Car’s

screeching tires, press the burn-out

button. The right front signal lights

and right rear tail lights will flash.

Horn button

To “honk the horn,” push the horn

button.

Pass-by button

To hear a “zooming” sound, push the

pass-by button.

Gears button and Left turn signal

To hear the Corvette Race Car change

gears, press the gearsbutton.

The left front signal lights and left rear

tail lights will flash.

Steering wheel

Turns the Corvette Race Car to the left

or right.

Dashboard

Get to Know Your Corvette Race Car Before Driving

Cup holder

The Corvette Race Car features a slide-

out cup holder located under the radio

battery compartment. Push in when

not in use.

NOTE: DO NOT place a cup

containing hot liquid in the cup holder.

It might spill, causing burns.

Foot Pedal

Get to Know Your Corvette Race Car Before Driving

Shifter

The shifter controls the Corvette

Race Car’s speed and forward/

reverse.

Lowspeed

Low speed (2-1/2 mph) is for

beginning drivers. See page 17 for

instructions.

Reverse

Reverse (2-1/2 mph) is used for

backing up.The tail light will come

on. See page 17 for notes and

instructions.

Foot pedal

The foot pedal controls forward

motion, reverse and stopping.

Forward/reverse

Push down on the foot pedal,

and the Corvette Race Car will go

forward in high or low speed or

backward in reverse.

To stop

Release the foot pedal, and the

Corvette Race Car will stop.

NOTE: When the foot pedal is

released, the Corvette Race Car

will coast slightly before coming

to a complete stop.

IMPORTANT! The Corvette Race Car MUST come to a complete stop before

shifting into reverse and into low or high speed. Damage to the gears and motor

WILL occur.

High speed

High speed (5 mph) is for more advanced drivers. See page 17 for instructions

to unlock the shifter.

1.Tounlock the shifter, use a Phillips

screwdriver to remove the screw at the

bottom of the shifter.Keep the screw in

asafe place in case you want to replace

it for moreinexperienced drivers.

2.Push the shifter down into

“High” speed (the lowest position).

NOTE: The CorvetteRace Car MUST

come to a complete stop before shifting

into reverse and back into low or high

speed. Damage to the gears and motor

could occur.

3.Press down on the foot pedal, and the Corvette Race Car will go forward at 5 mph.

4.Release the foot pedal, and the Corvette Race Car will stop. NOTE: When the foot pedal

is released, the Corvette Race Car will coast slightly before coming to a complete stop.

How to Drive Your Corvette Race Car

Low Speed (2-1/2 mph) for Beginning Drivers

Turn the power switch to the right. You will hear an “ignition” sound then a

continuous “engine running” sound.

Push the shifter into “Low” speed (the center position). NOTE: The shifter comes

from the factory locked in the “Low” speed (2-1/2 mph) position. The shifter will

not go into “High” speed until it is unlocked (see below).

Press down on the foot pedal, and the Corvette Race Car will go forward at 2-1/2 mph.

Release the foot pedal, and the Corvette Race Car will stop. NOTE: When the

foot pedal is released, the Corvette Race Car will coast slightly before coming to a

complete stop.

Reverse

IMPORTANT! The Corvette Race Car MUST come to a complete stop before

shifting into reverse and into low or high speed. Damage to the gears and motor

WILL occur.

1.Release the foot pedal to stop the Corvette Race Car.

2.Push the shifter all the way up into reverse (the highest position).

3.Press down on the foot pedal, and the Corvette Race Car will go in reverse at 2-1/2 mph.

The rear tail lights will come on.

4.Release the foot pedal, and the Corvette Race Car will stop. NOTE: When the foot pedal

is released, the Corvette Race Car will coast slightly before coming to a complete stop.

High Speed (5 mph) for Advanced Drivers

ONLY experienced drivers may use “High” speed (5 mph).

The shifter will not go into

“High” speed until it is unlocked.

ONLYAN ADULTMAYUNLOCK THE SHIFTER.

NOTE: The radio requires (3) AA alkaline batteries. See page 6 for warnings and

instructions about installing the batteries.

Using the FM Radio

BDC

Radio speaker

Volume and On/Off knob

To turn on the radio, turn the

knob to the right. To adjust the

volume, turn the knob to the right

for more volume. Turn the knob all

the way to the left to turn the

radio off. IMPORTANT! DO

NOT play the radio too loudly,

as it may distract the driver.

Tuning button

Press the button to search for the

strongest signal. The search will

begin at the lowest frequency

(87.5 MHz) and go to the highest

frequency (109 MHz). It will not

go backward. Press the “Reset

button” to start over.

Reset button

Press this button when you want to

begin a new search for a station. For

example, if you select 109 MHz, in

order to choose another station, you

must press the “Reset button” to start

again at 87.5 MHz.

IMPORTANT! READ AND UNDERSTAND THE WARNINGS ABOUT THE 12-VOLT

BATTERY ON PAGE 3.

•ADULTS ONLY: After each use, or once a month minimum, charge the battery for a “full”

16 hours. DO NOT leave the battery on the charger for more than 30 hours. See pages 3

-4 for recharging instructions.

•Low battery signal will sound when the battery is running low on power. A “beeping”

sound will interrupt the “engine running” sound until the battery is recharged. See pages 3

-4 for recharging instructions.

•The Kid Trax 12-volt battery will eventually lose the ability to hold a charge. Depending

on the amount of use, and varying conditions, the battery should operate for one to

three years.

•DO NOT leave the battery in the Corvette Race Car for long periods of time unused.

Battery may drain completely, causing permanent damage. Disconnect the battery

connector from the battery.

•ADULTS ONLY: Handle the battery with care. DO NOT drop the battery. Permanent

damage to the battery could occur.

•If the battery is removed from the Corvette Race Car and stored, DO NOT store the

battery where temperatures are over 75ºF (24ºC) or under -10ºF (-24ºC).

•It is best to leave the battery in the battery compartment of the vehicle for long

storage periods. If you cannot do this or have a multiple batteries, please store the

battery on a wood surface to avoid cement floor surface discharge. Always wipe the

battery clean with a dry cloth prior to storage. You will still need to charge your

battery once each month (16 hours) during long storage periods to ensure battery life.

•If the battery leaks or has completely discharged, it is no longer usable. Remove the

battery according to the instructions on pages 20 and 21 and place it in a plastic bag. See

page 21 for disposal directions. Replace the battery with a Kid Trax 12-volt battery

ONLY. See page 26 to reorder parts.

•If the battery leaks, DO NOT allow acid from the battery to contact skin or eyes. If this

happens, call your physician immediately. Flush with cool water for 15 minutes.

•If the battery leaks, DO NOT ingest acid. If this happens, call your physician immediately.

Give water, milk of magnesia or egg whites. DO NOT induce vomiting.

•The Kid Trax 12-volt battery features a thermal fuse with a reset fuse in the battery

connector that will automatically trip and cut all power to the Corvette Race Car if the

motor, electrical system or battery is overloaded. The fuse will reset and power will be

restored after approximately 15 seconds. To avoid losing power, follow these guidelines:

DO NOT overload the Corvette Race Car. Maximum weight allowed: 130 lbs. (59 kg).

- DO NOT tow anything behind the Corvette Race Car.

- DO NOT drive up steep slopes.

- DO NOT drive into fixed objects, which may cause the wheels to spin, causing the

motor to overheat.

- DO NOT drive in very hot weather; components may overheat.

- DO NOT allow water or other liquids to come in contact with the battery or other

electrical components.

- DO NOT tamper with the electrical system. Doing so may create a short, causing the

fuse to trip.

If the thermal fuse trips repeatedly during normal use, your Corvette Race Car may need

repair. Call Pacific Cycle Inc. Consumer Relations at (877) 741-6154 for an authorized

service center.

Battery Maintenance

Page is loading ...

KidTrax KT1006, KT1007, KT1008 User manual

Related papers

Other documents