Symmons SLW-5112 Installation guide

Category
Faucets
Type
Installation guide
Pipe
Sealant
LN-02058
Rear view
Step 3
Attach spout
HOT
COLD
Step 4
Connect hose between
valve and center tee
Step 5
Fasten drain body and
tail piece to sink
Step 8
Connect lift rod,
clevis strap, pivot rod
and adjust linkage
Step 1
Attach control
valves
Step 2
Attach handles
Step 10 Flush lines and
check for leaks
Step 9
Connect supply lines
(hoses not included)
Step 7
Attach pivot
rod to drain body
Quick Install Guide Winslet Two Handle Widespread Lavatory Faucet, SLW-5112
p/n LN-02058
Step 6
Install stopper and
set eye position
PLUMBERS
PUTTY
1 2 3 4
Model Number
SLW-5112 Two Handle Widespread
lavatory faucet with pop-up drain
Applies to models manufactured
after Q1 2013, p/n LN-02058
identied on faucet rear base
Care and Cleaning
Clean nished area using mild soap or
a non-abrasive cleaner and then quickly
rinse with water. A non-abrasive wax
may be used to preserve nish area.
Need Help?
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Monday - Friday 7:30 am - 7:00 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Installation Brief
Winslet
Two Handle Widespread Lavatory Faucet
Decorative Finishes
Append finish suffix code to replacement part
numbers when applicable
-STN
Satin nickel
-ORB
Oil rubbed bronze
SLW-5112
1/2 inch supply
compression nuts
(2) included
handle
assembly
nut
gasket
LN-333-KIT
FLR-102-1.5-KIT
LN-742-KIT
ow rates
2.2 gpm (8.3 L/min)
1.5 gpm (5.7 L/min)
1.0 gpm (3.8 L/min)
RL-138
*
aerator
RL-131
Replacement Parts
Part Number Item
(includes both
hot & cold
handles)
Lift rod
RL-132
*
Kits include aerator and
aerator removal tool
KN-114E (hot)
OFF = CW
KN-113E (cold)
OFF = CCW
valve cartridge
KN-113E
identified
by three
grooves
faucet handle
(reference table)
lift rod
stopper
pop-up drain
assembly
includes stopper
p/n RL-154LR
valve cartridge
valve body (hot)
ange nut
standard aerator
2.2 gpm
supply
compression nut
(supply hose
not included)
retainer washer
retainer nut
nut
gasket
valve body
(cold)
tee
spout
spout o-ring
removal tool
ex hose
1/8" MNPT x 1/2" NPSM
*
Note: When ordering parts for products with an optional
decorative nish, append appropriate three letter nish sufx code
to part numbers marked with an asterisk (
*
).
Replacement part numbers apply only to faucets
manufactured after Q1 2013, p/n LN-02058 identied on
faucet rear base. Reference page 1, Quick Install Illustration
Remove cartridge
using a 17 mm
deep socket
wrench.
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 7:30 am - 7:00 pm EST or
check our website at
ww.symmons.com
for a list
of Symmons distributors.
p/n LN-02058
Parts Assembly Winslet Two Handle Widespread Lavatory Faucet, SLW-5112
Hole size
1-1/4" (32 mm) min
1-1/2" (38 mm) max
4-5/8"
(116 mm)
6-1/8"
(154 mm)
2-1/2"
(63 mm)
5/8" (15 mm)
1/2"-14 NPSM
Hole size
1-1/16" (27 mm) min
1-7/16" (37 mm) max
4" (102 mm) min
Flexible hose
2-1/4" dia (57 mm)
8"(203 mm) min
16"(406 mm) max
Deck thickness
1-3/8" (35 mm) max
Note: Dimensions subject to change without notice.
2-5/8" ( 66 mm)
7-3/4"
(198 mm)
2-3/8" dia
(61 mm)
1" dia
(25 mm)
7/8" dia
(21 mm)
4-1/8"
(105 mm)
p/n LN-02058
Dimensions Winslet Two Handle Widespread Lavatory Faucet, SLW-5112
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800)796-6667 Fax: (800)961-9621
Copyright © 2015 Symmons Industries, Inc. www.symmons.com [email protected] ZV-3003 REV D 100615
  • Page 1 1
  • Page 2 2

Symmons SLW-5112 Installation guide

Category
Faucets
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI