Non-
Removable Removable
stopper stopper
Quick Install Guide Oxford Widespread Lavatory Faucet, SLW-4212
Fasten drain body to sink
Step 5
Step 1
Attach faucet spout
Step 3
Attach faucet handles
Step 2
Install stopper and pivot
rod to drain body
Step 6
Connect lift rod, clevis strap,
pivot rod and adjust linkage
Step 7
Attach control valves to sink
Step 1
Flush water supply lines
Step 8
Step 1
Connect water supply lines
Step 4
HOT
COLD
Plumbers
Putty
Pipe
Sealant
3/32"
1 2 3 4
Need Help?
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: [email protected]
Monday - Friday 8:00 am - 7:30 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Installation and Service Instructions
Oxford
™
Widespread Lavatory Fau cet SLW-4212
Alternate Finish Code
append to part numbers when applicable
-STN
Satin Nickel
-ORB
Oil rubbed bronze
--
Chrome (standard)
Model Numbers
SLW-4212
Lavatory faucet with
pop-up drain
Caution: If replacing an older faucet ensure water supply is
turned
OFF before removing. Then open faucet valves to relieve
water pressure.
Step 1 Attach control valves to sink
Step 2 Attach faucet handles
Step 3 Attach faucet spout
screw down
until thread
stops
3/32" Allen
wrench
OFF
OFF=CW
OFF=CCW
back of sink
front of sink
Connect water supply linesStep 4
Step 5 Fasten drain body to sink
1
2
PLUMBERS
PUTTY
ange
beveled
washer
friction
washer
ange nut
back
of sink
*
ange washer
(optional)
*
use included ange
washer only when
plumbers putty is
not available or
when drain hole
dictates
Pipe
Sealant
HOT
COLD
Installation Instructions
Page 2
Install stopper and pivot rod to drainStep 6
Connect lift rod and adjust linkageStep 7
Care of faucet fi nish
Clean finish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may be
used to preserve finish area.
Valve cartridge replacement
Flush water supply linesStep 8
3/32" Allan
wrench
3/32" Allen
wrench
OFF position
OFF = CW
OFF = CCW
Replace appropriate hot
and cold cartridge as
referenced in Replace-
ment Parts table.
May also use a 17mm
deep socket wrench.
1 2 3
Drain body
1/2" (13 mm)
Pipe
Sealant
1
2
removable
non
removable
easily
removable
Page 3
Part Number Item
Replacement Parts
handle
screw
collar
fastener
gasket
KN-113E
identified
by groove
KN-114E (hot)
OFF = CW
KN-113E (cold)
OFF = CCW
valve cartridge
LN-333-KIT
FLR-102-1.5-KIT
LN-742-KIT
aerator ow rates
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
1.0 gpm (3.8L/min)
WSF-422L-KIT
*
includes two handle
assemblies
removal key
included
aerator
Parts Assembly Oxford Widespread Lavatory Faucet, SLW-4212
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 8:00 am - 7:30 pm EST or
check our website at www.symmons.com for a
list of Symmons distributors.
standard aerator
2.2 gpm
faucet handle
reference table
valve cartridge
reference table
lift rod
LN-572*
stopper
P-100N*
pop-up drain
assembly
P-25LR
*
includes stopper
spout
LN-610*
spout base
LN-571*
*
Note: When ordering replacements parts for
faucets with an optional decorative nish, append
appropriate three letter nish sufx code to part
numbers marked with an asterisk (
*
).
1/2"-14 NPSM
1" dia. (25 mm)
Hole size
1-1/16" (27 mm) min.
1-7/16" (37 mm) max.
4" (102 mm) min.
Flexible hose
2" (51 mm) square
8"(203mm) min.
16"(406mm) max.
Deck thickness
1-3/8" (35 mm) max.
Note: Dimensions subject to change without notice.
2-3/4" ( 70 mm)
5-3/8"
136 mm
2-1/4" square
(56 mm)
13/16" dia. (21 mm)
Hole size
1-1/4" (32 mm) min.
1-1/2" (38 mm) max.
7-3/8"
187 mm
3-1/2"
89 mm
5-3/8"
135 mm
5-1/8" (130 mm)
3-1/4"
83 mm
1-1/8"
28 mm
5/8" (15 mm)
Dimensions Oxford Widespread Lavatory Faucet, SLW-4212
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02189
(800) 796-6667, (781) 848-2250
■ Fax (800) 961-9621, 781-664-1300
Website:
www.symmons.com
■ Email:
© 2009 Symmons Industries, Inc. Printed in U.S.A. ■ ZV-587 ■ 042809
/
