LVG2012-0035-FS

A&A Surfaces LVG2012-0035-FS Installation guide

  • Hello! I am an AI chatbot trained to assist you with the A&A Surfaces LVG2012-0035-FS Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Profi le Specs
Installation Guide
Stair noses are used to fi nish the end of a step
1.
3. 4.
2.
Measure the width of the step
and cut to length.
Carefully roll the stair nose into place
against the front of the step. Press
down fi rmly over the entire stair nose.
Let the adhesive cure according to
directions.
For added security, use fi nishing nails.
Apply a generous
bead of
construction
adhesive along
the underside
of the stair
nose.
Subfl oor Subfl oor
Floor Floor
Riser Riser
V-FSN-15
2.75˝
0.75˝
0.57˝
/